Amerock Concentric cabinet pull in the BP36813BBZ model gives a defined 5-1/16 in center-to-center dimension, which sets an exact drill pattern for consistent cabinet and drawer layouts across a run of doors and fronts. The 128 mm center-to-center sizing also matches common metric boring patterns, which helps streamline work in mixed imperial and metric shops. A 5-7/16 in overall length creates a proportional look around the fastener spacing, which helps the pull sit visually balanced on standard cabinet rail widths. The 1 in width provides a solid gripping surface, which supports comfortable everyday operation for doors and drawers. A 7/8 in projection keeps fingers clear of the cabinet face, which reduces knuckle contact while opening. The pull is made from zinc, which offers a stable base material for the decorative finish. The golden champagne finish provides a warm metallic appearance, which coordinates with many contemporary and transitional cabinet finishes.
The defined 5-1/16 in center-to-center measurement sets the two mounting points, which lets installers transfer that spacing directly to jigs or templates for efficient boring. The 128 mm reference in the same dimension aligns with metric tooling, which is helpful when cabinets are drilled on European equipment. A 5-7/16 in overall length shows how far the pull extends across the face, which aids in choosing the right size for drawer widths or door stile widths. The 7/8 in projection determines how far the pull stands off the surface, which allows planning around adjacent doors and drawer fronts. The 1 in width and 5/16 in by 1 in base dimensions define how much flat surface is needed, which is useful when working near edge profiles or narrow rails. The pull uses 8-32 x 1 in screws, which matches a common cabinet hardware thread for straightforward fastening into standard door and drawer thicknesses.
The Amerock Concentric Series BP36813BBZ pull belongs to the handles and pulls category, which makes it suited for typical cabinet doors and drawer fronts in woodworking projects. The 5-1/16 in center-to-center layout pairs well with medium to large cabinet doors, which helps keep the pull proportionate to the panel size. On drawer fronts, the 5-7/16 in length keeps the handle visually substantial without overwhelming common drawer heights, which is useful in kitchens, baths, or shop cabinets. The golden champagne finish offers a muted metallic tone, which coordinates with many painted or stained cabinet finishes where a softer look than bright brass or chrome is preferred. Because the pull projects 7/8 in from the surface, it works in layouts where doors need clearance for fingers between adjacent fronts. The 1 in width and defined base dimensions fit well on standard stile and rail construction, which supports consistent visual alignment across a room of cabinetry.
The precise 5-1/16 in (128 mm) center-to-center dimension on this Amerock Concentric cabinet pull supports repeatable drilling when using jigs or line-boring equipment, which reduces layout time and helps keep hardware lines straight over long runs. The zinc construction provides a stable body for the pull, which supports the threaded engagement with 8-32 x 1 in screws during installation. A 7/8 in projection maintains space between the pull and cabinet face, which improves grip comfort and can reduce finish wear from repeated contact. The 1 in width helps distribute pulling force across the hand, which can be helpful on heavier drawers loaded with hardware or supplies. Base dimensions of 5/16 in by 1 in at each mounting point define a compact footprint, which lets installers position the pull confidently near panel edges or profiled rails while still keeping full contact on flat surfaces. The golden champagne finish on the zinc material adds a consistent color tone, which supports design continuity when multiple pulls are used throughout a project.
The Amerock Concentric BP36813BBZ pull has a 5-1/16 in center-to-center, 5-7/16 in overall length, 7/8 in projection, 1 in width, and 5/16 in by 1 in base dimensions, which together define layout and clearance.
The 5-1/16 in center-to-center spacing establishes fixed hole locations, which allows installers to set up jigs or templates once and repeat the same drilling pattern across multiple doors and drawers.
The BP36813BBZ pull is made from zinc, which provides a solid base for threading 8-32 x 1 in screws and for holding the golden champagne finish on typical cabinet installations.
The 7/8 in projection describes how far the pull stands off the cabinet face, which creates finger clearance behind the pull and helps avoid knuckle contact during everyday use.
The golden champagne finish gives the Amerock Concentric cabinet pull a warm metallic look, which works well with many painted or wood cabinet colors for a softer, contemporary appearance.
The Amerock Concentric BP36813BBZ pull uses 8-32 x 1 in screws, which matches standard cabinet hardware threading and supports installation into typical door and drawer thicknesses.
The Amerock Concentric Series BP36813BBZ cabinet pull combines a 5-1/16 in (128 mm) center-to-center layout, 5-7/16 in length, and 7/8 in projection, which together support predictable drill patterns and clearances on cabinet doors and drawers. The 1 in width and 5/16 in by 1 in base dimensions define a compact footprint, which suits common stile-and-rail or slab-front construction in woodworking projects. With zinc construction and a golden champagne finish, the pull delivers a stable body and warm metallic appearance, which fits many residential and shop cabinet designs. For cabinet runs that need consistent hole spacing, comfortable grip, and a golden champagne look across all fronts, this Amerock Concentric cabinet pull offers a dimensionally clear option.