Amerock Concentric 128mm gunmetal pull is a zinc cabinet handle designed around a 5-1/16 in center-to-center mounting, so hole spacing lines up cleanly on standard cabinet layouts. The gunmetal finish defines the visual tone, giving a consistent, dark metallic look wherever this pull is used. Its 5-7/16 in overall length provides a clear gripping area across typical drawer fronts and doors, helping hands land in the same spot every time. A 7/8 in projection sets the pull away from the surface, creating finger clearance for opening without contacting the door or drawer face. The 1 in width balances the narrow bar profile with enough surface area to feel substantial in hand. Base dimensions of 5/16 in by 1 in set the footprint at each mounting point, so you know exactly how much surface the pull covers on the cabinet face.
The 5-1/16 in center-to-center dimension sets the exact distance between mounting holes, which aligns with a 128 mm layout for drilling or existing holes on cabinet doors and drawers. This standardized spacing lets installers match the pull to common cabinet boring patterns without altering the opening action. The 7/8 in projection defines how far the pull stands off from the face, creating a set clearance that keeps fingers from scraping against the cabinet surface during use. At 1 in width, the pull face offers a steady gripping surface, supporting repeated opening and closing cycles. The 5/16 in by 1 in base dimensions at each end tell you how much flat area the feet occupy, which helps when aligning the pull on narrow rails or stile edges.
This pull is specified as part of Amerock's Concentric collection, so it suits cabinet runs where that coordinated series look matters from door to door. The 5-1/16 in center-to-center measurement is aligned with a 128 mm mounting pattern, fitting cabinet layouts designed around that hole spacing on both framed and frameless constructions where that dimension is used. Its 5-7/16 in overall length allows it to sit proportionally across many drawer fronts and wall cabinet doors, giving enough bar length for fingers to grab without overwhelming the face. The 1 in width presents a defined bar profile, which works on both smaller fronts that need a modest footprint and larger fronts where multiple pulls from the same Concentric Series might be used together. With a gunmetal finish, the pull visually supports cabinet designs that call for darker metal tones, so the installed hardware reads as a deliberate design choice across the room.
The 5-1/16 in center-to-center dimension gives installers a clear drilling reference, so hole locations can be laid out consistently from cabinet to cabinet using the same measurement. Matching that to the 128 mm callout helps align with metric boring patterns used in many shop jigs, which keeps production and field adjustments straightforward. The 7/8 in projection defines the standoff from the face, so the opening feel remains the same whether this pull is used on a wall cabinet or a base cabinet drawer. A 1 in width translates into a stable gripping area that is easy to center over the drilled holes, supporting clean visual lines when multiple pulls are mounted in a row. Base dimensions of 5/16 in by 1 in describe the footprint at each screw location, which helps when positioning the pull over existing marks or minor surface variations so the feet sit fully on solid cabinet material.
The Amerock Concentric 128mm gunmetal pull uses a 5-1/16 in center-to-center spacing, so mounting holes are laid out on that exact distance for consistent cabinet installations.
The Amerock BP36813GM Concentric pull has a 5-7/16 in overall length, which defines the full footprint across the cabinet front from end to end.
This gunmetal pull has a 7/8 in projection, setting how far it stands off the cabinet face to provide consistent finger clearance during use.
The Amerock Concentric Series BP36813GM pull is made from zinc, giving it a metal body suited to typical cabinet and drawer operation.
This cabinet pull is 1 in wide, providing a defined gripping surface across the front where hands contact the hardware.
Each base on the BP36813GM measures 5/16 in long by 1 in wide, describing the footprint that rests on the cabinet surface at each screw location.
The Amerock Concentric 128mm gunmetal pull combines a 5-1/16 in center-to-center layout, 5-7/16 in overall length, and 7/8 in projection, so cabinet hardware planning can follow fixed, known dimensions. With zinc construction, a 1 in width, and defined base measurements of 5/16 in by 1 in, this BP36813GM pull from Wurth Baer Supply gives installers clear sizing for cabinet fronts that call for a gunmetal Concentric Series handle.