Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric satin nickel pull is a zinc cabinet handle designed for doors and drawers where a 6-5/16 in (160 mm) center-to-center layout is already drilled. This fixed hole spacing lets the pull drop into existing 160 mm layouts without redrilling, which supports clean retrofits and consistent spacing on new runs. The 6-11/16 in overall length gives each front a substantial visual span, which helps larger cabinet doors and wide drawers look balanced in a row. A 7/8 in projection holds fingers away from the surface during use, which reduces knuckle contact on face frames and raised panels. The 1 in width gives a solid gripping surface across the bar, which helps when pulling heavier loaded drawers. Satin nickel finish brings a muted metallic look to the zinc construction, which works well on many cabinet colors in kitchens, baths, and built-ins.
This Amerock Concentric pull uses 8-32 x 1 in screws, which match common cabinet joinery where standard door and drawer front thicknesses are drilled from the back. The 6-5/16 in center-to-center layout fixes the screw locations, which simplifies jig setup when drilling new fronts or updating a full bank. Zinc construction gives the pull a solid feel at the hand contact points, which works well in day-to-day cabinet operation. The 7/8 in projection and 1 in width define the working envelope around fingers, which supports smooth opening and closing on both framed and frameless cabinet designs.
This Concentric pull with 160 mm (6-5/16 in) center-to-center spacing fits layouts built around wider pulls, which suits full-height doors, wide drawers, and taller wall cabinets. The 6-11/16 in overall length visually anchors larger fronts, which keeps the hardware in scale with pantry sections and base cabinets. A 7/8 in projection gives space between the hand and the cabinet surface, which helps around proud door edges, deeper profiles, and decorative rails. The satin nickel finish coordinates with other satin nickel decorative hardware, which supports continuous runs of matching handles in kitchens, baths, and storage areas. The 1 in width provides a steady grip across the handle, which works well for everyday opening cycles in busy work areas.
The defined 6-5/16 in center-to-center dimension lets drilling templates and boring equipment stay locked to one spacing, which helps banks of doors and drawers line up without alignment problems. Base dimensions of 5/16 in long by 1 in wide at each mounting point define the footprint where the pull meets the surface, which assists in placing bases clear of panel grooves, edge profiles, and stile joints. Using 8-32 x 1 in screws ties directly into standard cabinet hardware practice, which keeps thread engagement predictable through common front thicknesses. The 7/8 in projection combines with the 1 in width to establish a clear gripping zone, which is useful when designing for users who open cabinets frequently. Satin nickel over zinc provides a consistent appearance across each pull, which maintains a uniform look when dozens of pieces are installed in the same room.
The Amerock Concentric BP36814G10 pull has a 6-5/16 in (160 mm) center-to-center dimension, which matches layouts drilled for 160 mm cabinet handles.
The Concentric satin nickel pull measures 6-11/16 in in overall length, which helps plan hardware spacing on wider cabinet doors and drawers.
The BP36814G10 pull projects 7/8 in from the mounting surface, which provides finger clearance between the hand and the cabinet face.
The Amerock BP36814G10 pull uses 8-32 x 1 in screws, which align with common cabinet door and drawer front thicknesses.
The Concentric pull is made from zinc with a satin nickel finish, which delivers a smooth, brushed-metal look on cabinet fronts.
This Amerock Concentric pull has a 1 in width, which offers a stable gripping surface for opening doors and drawers.
The Amerock Concentric BP36814G10 pull combines a 6-5/16 in (160 mm) center-to-center layout with a 6-11/16 in length, which suits wider cabinet fronts and established drilling patterns. Satin nickel finish on zinc construction provides a coordinated look with other satin nickel decorative hardware, which is valuable on full-room projects. With 7/8 in projection, 1 in width, and 8-32 x 1 in screws, this pull aligns well with standard cabinet dimensions and drilling practices. For projects using 160 mm spacing across doors and drawers, this Amerock Concentric satin nickel pull offers a consistent, measured solution.