
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Concentric cabinet pull in golden champagne gives a cabinet or drawer a defined grip point, using a 6-5/16 in center-to-center layout that sets up consistent drilling across a run of fronts. The zinc construction forms a solid pull body, supporting everyday door or drawer operation in a shop, kitchen, bath, or built-in setting. A total length of 6-11/16 in lays out a clear visual span on the face, helping align multiple pulls to the same proportion. The 7/8 in projection steps the hand away from the cabinet surface, creating finger clearance for a firm grasp. A 1 in width across the handle provides a stable contact area, which helps users open heavier fronts without twisting pressure. Base dimensions of 5/16 in length by 1 in width define compact footprints at each mounting point, which matters when working near frame edges or narrow rail profiles.
The 160 mm center-to-center layout aligns closely with the 6-5/16 in center-to-center dimension, giving both metric and imperial reference points when marking or drilling cabinet fronts. This fixed spacing lets jigs or templates be set once, then used repeatedly for doors and drawers. The 6-11/16 in overall length helps determine clearance from panel edges and neighboring hardware, reducing conflicts in tight layouts. A 7/8 in projection creates a stand-off distance that keeps the users hand away from door edges, which is useful around frame-and-panel constructions. The 1 in width and 5/16 in by 1 in base dimensions define the footprint touching the surface, which is important when placing the pull on narrow rails or next to profile details. Screw size 8-32 x 1 in specifies the thread and length used to secure the pull through typical cabinet stock.
The golden champagne finish on this Amerock Concentric cabinet pull gives a warm metallic tone that can be aligned with other golden champagne decorative hardware in the same room, supporting visual continuity across doors and drawers. The 6-5/16 in center-to-center dimension places it in a mid-length pull range, which suits standard cabinet doors and many drawer widths without overwhelming the face. A total length of 6-11/16 in extends slightly beyond the mounting centers, giving users more gripping area while still working on common cabinet module sizes. The 1 in width across the handle presents a defined bar that is easy to grab from above or below, which suits both base cabinets and upper wall units. Base dimensions of 5/16 in by 1 in keep each mounting foot compact, making this pull a candidate for narrower frame members, such as face-frame rails or smaller drawer fronts. The zinc material provides a solid base for the handle form, which supports repetitive operation in kitchens, bathrooms, or shop cabinetry.
The 160 mm center-to-center measurement aligns directly with the 6-5/16 in center-to-center spacing, giving installers a consistent standard when setting up drilling patterns, which reduces layout variation across a bank of cabinets. By using the specified 8-32 x 1 in screw size, the pull is fastened using a common machine-screw thread that suits many cabinet fronts, helping maintain consistent hardware across multiple openings. The 7/8 in projection defines how far the pull stands off the surface, so installers can anticipate hand clearance in front of doors or drawer fronts and avoid interference with adjacent trim. With a 6-11/16 in overall length and 1 in width, the pull presents a predictable footprint, making it easier to align tops or bottoms with visual reference lines across a kitchen or office run. Base dimensions of 5/16 in length by 1 in width at each end provide small but defined contact zones, which support neat alignment along rails and stiles. The golden champagne finish, paired with the Amerock BP36814BBZ part designation, helps specifiers match this exact pull when repeating a design across multiple rooms or future projects.
The Amerock Concentric cabinet pull has 6-5/16 in center-to-center spacing, also specified as 160 mm, which sets the drilling distance between the two mounting holes.
The Amerock BP36814BBZ pull measures 6-11/16 in in overall length, which helps match it to the width of cabinet doors and drawer fronts.
This golden champagne cabinet pull projects 7/8 in from the surface, creating finger clearance between the hand and the cabinet face during use.
The Amerock Concentric cabinet pull is made from zinc, providing a solid metal body for repeated door and drawer operation.
This cabinet pull uses 8-32 x 1 in screws, which are threaded machine screws sized to pass through typical cabinet door and drawer front thicknesses.
Each end of the pull has base dimensions of 5/16 in length by 1 in width, defining a compact mounting footprint on the cabinet surface.
The Amerock Concentric cabinet pull in golden champagne combines a 6-5/16 in center-to-center layout with a 6-11/16 in overall length, giving a repeatable size for cabinet runs. Zinc construction, 7/8 in projection, and a 1 in width support everyday handling on doors and drawers. With defined base dimensions and a specified 8-32 x 1 in screw size, this pull provides clear mounting parameters for installers planning coordinated golden champagne hardware across a project.