Amerock Concentric pull 160mm identifies this pull as part of Amerock Corporation's Concentric Collection, which helps match it visually with other pieces from the same design family across a project. The 6-5/16 in center-to-center drilling dimension sets the hole spacing, so it suits layouts planned around that standard measurement. The overall 6-11/16 in length gives a bit of grip beyond the mounting holes, which helps hands get a firm hold on doors or drawers. A 7/8 in projection sets how far the pull stands off the front, giving finger clearance while keeping fronts relatively close to the case. The 1 in width provides a stable gripping surface along the pull, which supports consistent hand placement. Base dimensions of 5/16 in length by 1 in width define the footprint at each mounting point, which guides layout against rails or edges.
The 6-5/16 in center-to-center dimension defines where holes sit in the door or drawer front, which guides jig setup for repeat drilling along cabinet runs. Its 6-11/16 in overall length means the pull overhangs the hole spread, which positions the ends slightly past the boring layout for a finished look. A projection of 7/8 in sets the standoff distance, which affects how fingers enter behind the pull on doors or drawers that are opened repeatedly. The base size of 5/16 in by 1 in at each mounting point determines contact area against the surface, which matters when aligning the pull visually with stiles or rails. The screw size of 8-32 x 1 in defines the thread and length, which affects how it engages typical cabinet front thickness during fastening.
The 6-5/16 in (160 mm) center-to-center spacing positions this pull well on medium to larger cabinet doors and drawers set up for that drilling pattern, which helps maintain proportion on wider faces. Its 6-11/16 in overall length provides some extension beyond the boring, which helps the handle visually anchor on fronts with broader rails or slab designs. The 7/8 in projection keeps the pull close to the face while still allowing room for fingers, which suits installations where fronts sit near adjacent panels or appliances. The width of 1 in across the bar gives a defined gripping surface, which benefits doors and drawers that are used multiple times per day. Base dimensions of 5/16 in length by 1 in width concentrate the contact area at each mounting point, which supports clean registration along layout lines on stile or rail edges.
The identification as Amerock Concentric series ties this pull to a specific collection, which simplifies keeping hardware consistent across kitchens, baths, and casework runs. The part number BP36814GM provides a clear reference when matching finishes or adding more pulls later, which supports long-term project continuity. The specified center-to-center of 6-5/16 in (160 mm) gives a fixed measurement for drilling templates, which reduces layout variation from one cabinet to the next. Its 6-11/16 in length combined with 1 in width defines a predictable footprint, which helps designers and installers visualize spacing between multiple pulls on wide drawers. The 7/8 in projection is a known standoff dimension, which can be factored into clearance planning near walls or tall panels. Listing the screw size as 8-32 x 1 in defines the fastener thread and length, which matters when pairing the pull with doors or drawer fronts of common thicknesses.
The pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets the exact hole spacing used when boring cabinet doors and drawers for this model.
The pull has an overall length of 6-11/16 in, so it extends slightly beyond the 6-5/16 in hole spread for a balanced look on suitable cabinet fronts.
The pull projects 7/8 in from the mounting surface, which defines how much finger clearance is available behind the handle during use.
Each base measures 5/16 in in length by 1 in in width, which indicates the contact footprint against the cabinet door or drawer front.
The pull uses 8-32 x 1 in screws, so the thread and length are defined for planning how it fastens through typical cabinet fronts.
The pull is part of Amerock Corporation's Concentric Collection, which identifies its design family when coordinating decorative cabinet hardware.
The Amerock Concentric Series 6-5/16 in center-to-center gunmetal pull BP36814GM provides defined dimensions for layout, drilling, and clearance, which supports predictable cabinet results. Using its specified length, projection, center spacing, and base size helps align design intent with actual installed hardware across each run.