Amerock Concentric 192 mm pull is a satin nickel cabinet handle designed to give doors and drawers a consistent, modern look across a run of cabinetry. The pull uses a 7-9/16 in center-to-center mounting, which aligns the fasteners across multiple fronts so layouts stay clean and repeatable. Its overall 7-15/16 in length creates a substantial hand grip, which helps when opening wider or heavier cabinet doors. The 7/8 in projection sets the handle off the face enough for fingers to wrap behind, supporting comfortable use without crowding the door surface. A 1 in width across the bar gives a balanced look that suits many door sizes while keeping a practical gripping surface. The pull is made from zinc, providing a solid metal construction that supports everyday cabinet use in kitchens, baths, and storage areas. The satin nickel finish delivers a muted metallic look that coordinates with many hinge and appliance finishes.
This Amerock Concentric satin nickel pull uses a 7-9/16 in center-to-center mounting distance, so hole locations are fixed for drilling cabinet faces in advance of installation. The pull length of 7-15/16 in means the handle extends slightly beyond the mounting centers at each end, giving some visual margin around the fastener locations. A projection of 7/8 in sets the bar away from the cabinet face, shaping how far the hand sits from the door or drawer front. The 1 in width and 5/16 in base length work together at each mounting point, defining the footprint where the pull meets the cabinet surface. The base width of 1 in matches the main width, presenting a continuous look from mounting point to grip area. The specified screw size of 8-32 x 1 in sets the thread and length relationship between the pull and typical door or drawer panel thicknesses.
The Amerock Concentric Series 7-9/16 in center-to-center pull is suited to cabinet doors and drawers that can accept its 7-9/16 in mounting span, so it aligns well on wider fronts or multi-drawer banks. With a 7-15/16 in overall length, it visually matches medium to larger cabinet faces, helping maintain proportion when used on base cabinets and pantry doors. The 1 in width gives the pull a defined presence against both narrow and wide rails, so it can be repeated across a full kitchen or casework run without appearing undersized. Its 7/8 in projection provides a working gap between the hand and the cabinet, which is useful on face-frame and frameless constructions where users need reliable clearance. The satin nickel finish allows this pull to sit comfortably alongside other satin nickel decorative hardware, tying together handles and related visible metal components. Built from zinc, the pull serves as a solid metal handle for cabinets that see frequent opening in kitchens, bathrooms, and storage installations.
The 7-9/16 in center-to-center drilling dimension on this Amerock BP36815G10 pull defines a precise mounting pattern, which helps create straight, repeatable lines of handles when laying out multiple doors or drawers. Because the pull length is 7-15/16 in, there is a consistent amount of bar extending beyond the mount points, which helps installers visually center the hardware on rails or drawer fronts. The 5/16 in base length by 1 in base width at each end establishes a compact but stable contact patch against the cabinet, which supports firm seating when tightening the 8-32 x 1 in screws into the threaded body. The 7/8 in projection influences how far the front of the pull stands off the surface, which affects finger clearance and the shadow line that appears on the face. With a 1 in grip width, users experience a straightforward hand feel that stays consistent from cabinet to cabinet, reducing variation across a large installation. The satin nickel finish on the zinc construction maintains a single appearance standard wherever this Concentric pull is used in the same project, simplifying hardware coordination.
The Amerock Concentric 192 mm pull has a 7-9/16 in center-to-center measurement, so drilled holes follow that spacing for consistent alignment across cabinet doors and drawers.
The Amerock BP36815G10 pull has a 7-15/16 in overall length, giving it a substantial span across the cabinet face for a balanced visual appearance.
This satin nickel Concentric pull projects 7/8 in from the cabinet surface, providing practical finger clearance between the handle and the door or drawer front.
The Concentric Series pull is made from zinc, giving it a metal construction suited to repeated cabinet use in residential and similar environments.
This Amerock cabinet pull is specified with 8-32 x 1 in screws, setting the thread size and nominal screw length used with the pull.
The Amerock BP36815G10 part number designates this specific Concentric Series satin nickel pull with 7-9/16 in center-to-center and zinc construction for consistent reordering.
The Amerock Concentric 192 mm pull combines a 7-9/16 in center-to-center layout with a 7-15/16 in overall length, giving cabinets a unified handle pattern across doors and drawers. Its zinc construction and satin nickel finish deliver a coordinated look with other satin nickel decorative hardware. The 7/8 in projection and 1 in width create a practical gripping profile that performs well in everyday cabinet use. With defined dimensions and the Amerock BP36815G10 identifier, this pull supports straightforward specification when matching or extending existing installations. Choose this satin nickel Concentric pull when you want a clearly defined drilling pattern and consistent appearance across cabinetry.