Amerock Concentric 192mm cabinet pull is a zinc handle from Amerock Corporation designed for decorative cabinet applications, so it suits projects where consistent hardware styling matters across doors and drawers. The 7-9/16 in (192 mm) center-to-center drilling spaces the fasteners, which helps installers match standard boring patterns on many cabinetry layouts. Its overall 7-15/16 in length gives the pull a longer hand grip area, helping users open wider or taller doors with a controlled feel. The 7/8 in projection sets the handle off the fascia, creating finger clearance that supports quick grasping, even on thicker door edges. A 1 in width across the pull face presents a substantial touch surface, which can aid alignment when visually lining up multiple pulls along a run of cabinets. The golden champagne finish provides a warm metallic tone that can coordinate with other golden hardware elements in the same space.
This Amerock Concentric series pull uses a 7-9/16 in (192 mm) center-to-center hole spacing, so the mount points are fixed at that distance for drilling layouts. The pull fastens using 8-32 x 1 in screws, which ties the installation to a common cabinet hardware thread size for straightforward fastening into standard door and drawer thicknesses that suit that length. The base dimensions of 5/16 in length by 1 in width define the foot contact area at each mounting point, which helps installers understand how much flat surface is needed around each hole. With an overall length of 7-15/16 in, the pull can bridge wider panel areas, giving some flexibility to position it while still covering the drilled locations.
This Amerock Concentric 192mm cabinet pull belongs to the decorative Handles and Pulls category, so it is suited to cabinet and furniture fronts where visible hardware is part of the finished look. The golden champagne finish places it in a warm metallic palette, which can coordinate visually with golden champagne hinges, knobs, or other decorative hardware specified in the same room. With a 7-9/16 in center-to-center drilling, the pull fits layouts that call for a longer handle across doors or wide drawers, giving users more grip span on taller pantry doors or oversized fronts. Its 7-15/16 in overall length means the bar visually anchors larger faces, which can help balance proportions on full-height cabinets compared to shorter pulls. The 7/8 in projection and 1 in width create a defined handle shape that stands off from the surface, which supports confident hand placement in high-use areas like kitchens, workrooms, or storage cabinetry.
The defined 7-9/16 in (192 mm) center-to-center measurement allows installers to reuse drilling jigs or templates set for that size, which speeds repetitive mounting across multiple doors and drawers. The 8-32 x 1 in screw specification ties directly to the threaded inserts of the pull, which keeps fastening consistent from one cabinet front to the next on jobs that share similar material thicknesses. Base dimensions of 5/16 in length by 1 in width at each foot show the footprint that contacts the door or drawer surface, which assists in placing the pull so the bases sit fully on flat areas without overhanging profile details. The 7/8 in projection gives a fixed standoff that remains the same across all installed pulls, which helps maintain uniform shadow lines when cabinets are viewed along a run. As a zinc pull, the material is solid metal, which provides a firm feel when tightening the screws and aligning the bar so each handle sits straight and level.
The Amerock Concentric 192mm cabinet pull has mounting holes spaced 192 mm (7-9/16 in) apart, which defines the drilling layout on doors or drawers using this handle.
The Amerock BP36815BBZ pull has a 7-15/16 in overall length, which extends slightly beyond the mounting holes to give a full-length gripping bar on cabinet fronts.
The Amerock Concentric golden champagne pull projects 7/8 in from the mounting surface, which sets the grip away from the cabinet face for finger clearance.
The Amerock Concentric series 192mm pull is made from zinc, which provides a solid metal body for the handle.
The BP36815BBZ Amerock pull uses a golden champagne finish, which gives the handle a warm metallic appearance for coordinated decorative hardware layouts.
The Amerock Concentric cabinet pull is designed for 8-32 x 1 in screws, which correspond to a common cabinet hardware thread and length.
The Amerock Concentric 192mm cabinet pull in golden champagne combines a defined 7-9/16 in center-to-center drilling, 7-15/16 in overall length, and 7/8 in projection, giving installers a clear set of dimensions for consistent layouts. Zinc construction and a 1 in width create a solid metal grip that coordinates with other golden champagne decorative hardware from the same project. For cabinet doors or drawers designed around a 192 mm spacing, this Amerock BP36815BBZ pull offers a matched handle choice that aligns hole locations, visual proportions, and finish in one part.