Amerock Concentric gunmetal pull is a zinc cabinet handle designed around a 7-9/16 in center-to-center mounting span, so it targets standard hole spacing on many modern cabinet and drawer layouts. The 7-15/16 in overall length creates a comfortable hand grip area, which supports repeated opening on active kitchen, bath, or shop casework. Its 7/8 in projection sets the pull out from the front, giving finger clearance during use while keeping the hardware profile relatively tight to the face. A 1 in width across the bar provides a solid contact surface, which helps users get a secure hold even on heavier drawers. The gunmetal finish defines the visual appearance of the pull, allowing it to coordinate with other gunmetal-finished decorative hardware in the same space. The Concentric collection identity keeps styling consistent across projects that specify matching Amerock decorative hardware.
The 7-9/16 in center-to-center measurement on this Amerock pull dictates exact hole locations, which is important when laying out new drilling or matching pre-bored fronts. Its base dimensions of 5/16 in length by 1 in width at each foot define the footprint where the pull meets the cabinet surface, which matters when covering existing marks from previous hardware or staying within narrow rail widths. The 7-15/16 in overall length helps installers visualize edge clearances near adjacent pulls, appliances, or walls. With a 7/8 in projection and 1 in width, the pull occupies a known space in front of the cabinet, which supports planning for drawer clearance in tight spaces and for user hand access in everyday use.
This Amerock Concentric Series 7-9/16 in center to center gunmetal pull functions as a handle option for cabinet doors or drawers that follow a 192 mm, or 7-9/16 in, drilling standard. The center-to-center length keeps it suited to wider drawer fronts and taller doors, where a longer grip is often preferred for leverage. Its 7-15/16 in overall length allows the pull to span a meaningful portion of the front, which can be useful on base cabinets, utility cabinets, or shop storage where users expect a full-hand grasp. The 7/8 in projection shapes how it stands off the face, which is relevant on doors near corners or appliances where clearance is planned. The gunmetal finish positions this pull for designs that call for a darker, muted metal tone across a room.
The 192 mm, or 7-9/16 in, center-to-center dimension on this Concentric pull helps installers produce repeatable results when using jigs or drilling templates set for that spacing. The defined 7-15/16 in overall length provides a predictable hardware outline, which can simplify layout decisions when balancing pulls visually on multiple drawer sizes. A 1 in width across the pull body establishes a consistent gripping profile, which matters for users moving between doors and drawers fitted with the same piece. The base dimensions of 5/16 in length by 1 in width enable precise positioning of the pull ends, supporting alignment of the feet with stiles or rails on framed fronts. With zinc as the material and gunmetal as the finish, the BP36815GM part number ties these attributes to a single Amerock catalog item, which aids spec sheets and project documentation where exact product identification is required.
The Amerock BP36815GM pull has a 7-9/16 in center-to-center dimension, so drilling patterns and replacement layouts can be based on a 192 mm mounting span.
The pull length is 7-15/16 in, which helps with visual proportioning on wider drawer fronts or taller doors when laying out hardware positions.
This Concentric pull projects 7/8 in from the cabinet surface, which defines finger clearance and the amount of hardware extending into the room.
Each base on the Amerock BP36815GM measures 5/16 in in length by 1 in in width, which indicates the contact area against the cabinet face.
The pull is specified with 8-32 x 1 in screw size, which defines the machine thread and nominal screw length used to secure it through the front.
The BP36815GM uses zinc as the base material with a gunmetal finish, tying the pull to the Amerock Concentric collection styling and color tone.
The Amerock Concentric Series 7-9/16 in center to center gunmetal pull BP36815GM pairs a defined 192 mm mounting span with a 7-15/16 in overall length, which supports layouts on wider drawers and doors. Its zinc construction, 7/8 in projection, and 1 in width create a consistent handling profile across cabinets. The gunmetal finish sets a unified visual tone for projects that specify darker decorative hardware. For work that calls for these dimensions, material, and finish, this pull offers a clearly documented option to match detailed cabinet or casework plans.