Amerock Concentric 192mm Pull For Cabinets

Amerock Concentric 192mm pull is a cabinet handle from the Concentric Collection that uses a 7-9/16 inch center-to-center bore, so it lines up with standard 192 mm drill patterns on cabinet doors and drawers. The pull is made from zinc, giving a solid metal construction that supports everyday cabinet use in residential or shop environments. A polished nickel finish on the zinc body creates a bright, reflective surface that coordinates with polished nickel hinges or other decorative hardware in the same finish family. The overall length of 7-15/16 inch provides a comfortable gripping span across wider drawer fronts or tall doors without crowding the panel edges. A 7/8 inch projection holds fingers away from the cabinet face during operation, which helps prevent knuckles from rubbing the surface over time. The 1 inch width and 5/16 inch by 1 inch base dimensions give a defined footprint that seats consistently against the cabinet.

Key Details Of This Concentric Cabinet Pull

• The 7-9/16 inch center-to-center sizing matches 192 mm drilling, which helps installers align this Amerock BP36815PN cabinet pull with common layout jigs and existing hole patterns on replacement jobs.
• The 7-15/16 inch overall length extends slightly beyond the hole spacing, giving visible bar ends that frame the hardware on wider fronts and provide an easy target when reaching for the pull.
• The 7/8 inch projection stands the handle off the face, creating finger clearance for a firm grip and helping reduce contact with the cabinet finish during frequent opening and closing.
• The 1 inch width produces a slim profile across the front, which keeps the pull looking proportional on both doors and medium-width drawers without overwhelming narrow rail sections.
• The base dimensions of 5/16 inch long by 1 inch wide define a compact mounting footprint, helping the pull seat flat against the surface where there is limited stile or rail height.
• The polished nickel finish over zinc delivers a bright metal look that coordinates with other polished nickel decorative hardware, supporting a consistent appearance across a full run of cabinetry.

Mounting Dimensions For Straightforward Alignment

This Amerock Concentric polished nickel pull uses a 7-9/16 inch center-to-center measurement, so the mounting holes are spaced for the 192 mm standard pattern that many cabinet layouts follow. The 7-15/16 inch overall length adds a small extension beyond those holes, which helps installers visually center the pull on the panel while still matching existing bores. A 7/8 inch projection sets the handle off the door or drawer surface, leaving working room for fingers to wrap the pull without contacting the face. The 1 inch width and 5/16 inch by 1 inch base dimensions give a predictable contact area, which supports consistent positioning when repeating the same pull across multiple cabinets in a run.

Using This Amerock BP36815PN Pull In Projects

Where The 192mm Center To Center Pull Fits

The Amerock Concentric 192mm pull, with its 7-9/16 inch center-to-center spacing, is suited to cabinet doors and drawers drilled on the 192 mm standard, so it works in layouts where that bore distance is already established. The nearly 8 inch overall length helps it sit proportionally on wider drawer fronts or taller doors, giving a substantial visual line without reaching into oversized bar territory. Its polished nickel finish aligns with projects that use polished nickel decorative hardware, so it can carry the same finish across base cabinets, wall cabinets, and tall units. Because the pull belongs to the Concentric Collection, it can be matched with other Concentric pieces that share the same design language when a uniform look is required across a full installation.

Details That Support Repeatable Cabinet Results

The defined 7-9/16 inch center-to-center measurement on this Amerock BP36815PN cabinet pull supports installers who rely on metric or imperial jigs set for 192 mm, allowing repeat drilling in shop or onsite work without reconfiguring templates. The 5/16 inch long by 1 inch wide base dimensions give a compact yet consistent seating footprint, which helps align multiple pulls at the same reveal and orientation along a run of doors or drawers. A 7/8 inch projection offers enough stand-off to grab from above or below, so users can pull doors or drawers open from different angles without strain. The combination of 1 inch width and nearly 8 inch length spreads hand contact along the bar, which can reduce wear on the cabinet finish at a single point and helps distribute pull force more evenly over time.

Common Questions About This Amerock Concentric Pull

Select This Pull For 192mm Cabinet Layouts

The Amerock Concentric series 7-9/16 inch center-to-center polished nickel pull brings a 192 mm drilling pattern, nearly 8 inch overall length, and 7/8 inch projection to cabinet projects that need coordinated decorative hardware. Order this Amerock BP36815PN cabinet pull from Wurth Baer Supply to match existing 192 mm layouts while keeping a consistent polished nickel finish across doors and drawers.