Amerock Concentric satin nickel pull gives a 10-1/16 in center-to-center grip, so it spans wider cabinet or drawer fronts for a balanced, two-screw mount. The 10-7/16 in overall length creates a long, continuous handhold that feels substantial across the face. A 7/8 in projection stands the pull off the surface far enough for fingers to clear the door or drawer edge comfortably. The 1 in width across the bar provides a broad contact area, which helps distribute hand force and reduces pressure points. Zinc construction forms a solid, rigid body that supports repeated opening and closing in everyday cabinet use. The satin nickel finish offers a low-sheen surface that helps hide fingerprints and small marks in busy kitchen or shop environments. The Concentric collection design ties this pull to the Amerock Concentric Series, helping multiple doors and drawers share a consistent visual line.
The 10-1/16 in center-to-center drilling dimension defines where mounting holes land on the cabinet or drawer, which guides layout when boring fronts for this pull. A 10-7/16 in overall length keeps the ends close to the screw line, which helps the pull sit proportionally on common cabinet rail widths. With 7/8 in projection, the pull extends far enough to clear fingers without sticking excessively into walkways. The 1 in bar width relates directly to grip feel, giving a flat, stable surface for fingertips when pulling heavier loads. Base dimensions of 5/16 in long by 1 in wide concentrate the contact area at each end, which helps seat the pull firmly against the face for a clean, tight installation.
The 10-1/16 in center-to-center span suits wider cabinet doors and drawers, where longer hardware helps visually bridge the panel. On banked drawer stacks, the 10-7/16 in length lines pulls across the faces so each piece reads as a continuous horizontal element. In kitchens, the 7/8 in projection keeps hands away from door edges on upper and lower cabinets, supporting repeat use along full runs. The 1 in width works on both face-frame and frameless fronts, giving enough bar surface to grip without overpowering narrow rails. In workrooms or shops, zinc construction supports regular opening and closing on utility cabinets while the satin nickel finish coordinates with other satin nickel handles and pulls on nearby storage.
The precise 10-1/16 in center-to-center drill size lets jigs or drilling templates be set once and repeated, which helps keep hardware rows straight across multiple fronts. Because the pull length is 10-7/16 in, the installer can center the hardware by aligning the midpoint to the panel centerline, simplifying layout. The 7/8 in projection gives a known stand-off depth, which helps doors open without knuckles hitting face frames when used across full-height runs. A 1 in wide bar offers a predictable gripping surface, which keeps user hand placement consistent from cabinet to cabinet. The 5/16 in by 1 in base dimensions define the footprint at each mounting point, so edge distances and clearances can be planned to maintain uniform reveals. Amerock BP36816G10 part numbering ties these measurements to a specific pull, which helps reorder the same component when expanding an existing installation.
The Amerock BP36816G10 pull has a 10-1/16 in center-to-center dimension, which sets the screw hole spacing and aligns with layouts designed for that drilling size.
The pull length is 10-7/16 in, so it slightly overhangs the screw centers and visually covers a wider area on cabinet doors and drawers.
The Amerock BP36816G10 pull projects 7/8 in from the cabinet surface, providing finger clearance between the bar and the door or drawer face.
The BP36816G10 Concentric pull is made from zinc, creating a solid body suitable for repeated cabinet door and drawer use.
The pull is 1 in wide with base dimensions of 5/16 in long by 1 in wide, which define the contact area against the cabinet surface.
This Amerock Concentric Series pull has a satin nickel finish, giving a low-sheen metallic look that coordinates with satin nickel decorative hardware.
The Amerock Concentric satin nickel pull with 10-1/16 in center-to-center drilling ties dimensions, finish, and design into one consistent hardware choice. The 10-7/16 in length, 7/8 in projection, and 1 in width define how it feels and performs across doors and drawers. Zinc construction and the Concentric collection identity connect this pull to the Amerock line for repeatable results on new builds or expansions. Select BP36816G10 when a long, satin nickel pull with these exact measurements fits your cabinet layout.