Amerock Concentric Series 10-1/16 in (256 mm) Center to Center Gunmetal Pull, -BP36816GM

Amerock Concentric Gunmetal Pull For Cabinets

Amerock Concentric gunmetal pull is a cabinet handle from the Concentric collection that uses a 10-1/16 in center-to-center dimension, giving installers a precise hole spacing that matches layouts designed for this standard size. The pull is made from zinc, which provides a solid metal body that supports everyday cabinet and drawer use in residential or shop environments. Its gunmetal finish defines the visual look, allowing the hardware to coordinate with other gunmetal-finished components in a project. The pull measures 10-7/16 in in overall length, so it spans a wider drawer front or tall door stile without looking undersized. A 1 in width gives the hand a flat, comfortable surface to grip when opening heavier fronts. The 7/8 in projection sets the pull out from the surface, creating finger clearance while keeping the handle close enough to the face for a clean, streamlined profile.

Key Concentric Pull Details For Project Planning

• The Concentric collection designation ties this pull to other Amerock pieces in the same family, helping maintain a consistent visual line across cabinet doors and drawers on a job.
• The 10-1/16 in center-to-center measurement gives a fixed drilling layout, allowing accurate jig setup and repeatable boring across banks of cabinets using this pull size.
• The 10-7/16 in overall length provides added bar coverage across wider fronts, which helps balance proportions on large drawers and tall doors in a run.
• The 7/8 in projection creates working space between the pull and surface, improving finger access for users while keeping the hardware from catching on clothing in tight walkways.
• The 1 in width across the pull establishes a broader grip area, which makes it easier to grasp when operating larger or heavier cabinet fronts.
• The gunmetal finish defines the color tone of the pull, supporting finish coordination when pairing with other gunmetal components throughout a room.
• The zinc material construction gives the pull a metal core, supporting repeated opening and closing cycles in typical cabinet and drawer applications.

Mounting Dimensions And Handling Clearance

The 10-1/16 in center-to-center drilling dimension is the key mounting reference on this Amerock BP36816GM pull, because it sets where the two mounting holes align on the cabinet face. This spacing supports use with templates designed for this common long-pull size. The pull length of 10-7/16 in extends slightly beyond the hole centers at each end, which helps cover any minor edge chipping around the bore area. With a projection of 7/8 in off the door or drawer front, the handle stands out far enough to create a finger pocket behind it, so users can pull straight out without scraping knuckles on the surface. The 1 in width gives the pull a substantial front profile that is easier to grab from different angles, particularly on tall pantry doors or deep drawer banks.

Where This Amerock Pull Works And Why Specs Matter

Using The Concentric Pull On Cabinets And Drawers

This Amerock Concentric Series cabinet pull, designated by manufacturer part BP36816GM, is suited to cabinet doors and drawers where a long, linear handle is desired. The 10-1/16 in center-to-center spacing fits layouts designed around extended pulls, supporting alignment across wide drawer stacks and tall wall cabinets. Its 10-7/16 in overall length lets the handle visually anchor larger fronts, so a single pull can span more of the panel width. The zinc construction gives the pull a metal feel when operating drawers or doors, an advantage on frequently used storage areas in kitchens, shops, or utility rooms. The 1 in width across the pull face helps spread the contact area across the fingers, which feels more secure when operating deeper storage drawers loaded with contents. Combined with the 7/8 in projection, this width allows the hand to find the pull edge quickly by feel.

Dimensional Details Supporting Repeatable Results

The defined 10-1/16 in center-to-center dimension on this 256 mm cabinet pull gunmetal model allows installers to set drill guides once and repeat the same spacing across multiple fronts, reducing layout variation between cabinets. Because the overall length is precisely 10-7/16 in, the ends of the pull can be positioned relative to panel edges in a consistent way, helping maintain even reveals from door to door. The 5/16 in by 1 in base dimensions at each mounting point describe the footprint where the posts meet the surface, so fabricators can evaluate how much flat area is covered at each screw location. The 7/8 in projection positions the gripping surface away from decorative profiles or edge details, preserving access when doors feature applied molding. With a gunmetal finish on a zinc body, the pull visually matches other gunmetal hardware while keeping the same Concentric collection geometry, supporting cohesive runs where every handle aligns and feels the same in use.

Common Questions About This Concentric Gunmetal Pull

Selecting This Pull For Your Next Cabinet Run

The Amerock Concentric gunmetal pull with 10-1/16 in center-to-center spacing brings a defined set of working dimensions to cabinet and drawer projects. Its zinc construction, 10-7/16 in overall length, 1 in width, and 7/8 in projection translate directly into predictable drilling, consistent visual lines, and comfortable hand clearance. For runs built around a gunmetal finish and the Concentric collection profile, this pull offers a repeatable standard that can be applied across doors and drawers in the same space. Put these fixed measurements to work on your next cabinet layout by choosing the Amerock BP36816GM pull for long-handle positions.