Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric cabinet pull in satin nickel gives a 3-3/4 in (96 mm) center-to-center grip that lines up with standard drilled holes on many cabinet and drawer fronts, which keeps layout work straightforward during new installations or change-outs. The zinc material body provides a solid-feeling handle for regular opening and closing, supporting daily cabinet use in kitchens, baths, or shop-built casework. A total length of 4-1/2 in keeps the pull visually balanced around the 96 mm hole spacing, helping layouts look even across doors and drawers. The 11/16 in width creates a slim front profile, which keeps the pull from overpowering narrow rails or stiles while still being easy to grab. A projection of 15/16 in stands the pull off the face just under an inch, giving finger clearance without sticking too far into walkways or tight work areas.
The 96 mm center-to-center layout of this Amerock pull aligns with a common drilling standard, which lets installers match existing 96 mm hole runs when updating fronts or replacing older pulls. Each base measures 5/16 in by 5/16 in, so the contact points at the cabinet surface stay tight and defined, which helps the pull sit cleanly on narrow rails or edges without overlapping decorative profiles. The 15/16 in projection keeps the gripping area close to the door or drawer face, which supports ergonomic use while reducing how far hardware extends into cabinet aisles or shop walkways. The 4-1/2 in overall length provides enough bar span between the mounting points for a secure handhold, which is useful on frequently used drawers or doors in busy workspaces.
This Amerock Concentric Series pull, with a 3-3/4 in (96 mm) center-to-center dimension, suits cabinet and drawer fronts that are already drilled for 96 mm handles, which is common on many factory and shop-built cases. The satin nickel finish provides a muted metallic appearance, which coordinates with other satin nickel decorative hardware and moldings in a space. With an overall length of 4-1/2 in, the pull spans enough surface area to feel substantial on medium-width drawer fronts, which helps balance the visual weight across a run of base cabinets. The 11/16 in width preserves a slim front view, which suits more contemporary or streamlined installations where hardware should stay present but not dominant on the face of the cabinetry.
The zinc material construction of this pull provides a solid underlying structure, which supports repeated use on doors and drawers in high-traffic areas. The 15/16 in projection keeps the gripping surface just under an inch off the cabinet face, which offers consistent finger clearance from one cabinet to the next in a run. Base dimensions of 5/16 in by 5/16 in at each end define a small, precise footprint, which helps installers align the pull square to door edges and drawer lines for clean visual results. Because the center-to-center, projection, width, and total length are fixed, repeated use of this model across a project produces uniform spacing, grip feel, and sightlines from cabinet to cabinet.
The Amerock Concentric cabinet pull has a 3-3/4 in (96 mm) center-to-center dimension, which fits layouts drilled on the common 96 mm spacing used on many cabinet and drawer fronts.
The satin nickel cabinet pull projects 15/16 in from the door or drawer face, which provides finger clearance for gripping while limiting how much the hardware extends into walkways.
The Amerock BP36830G10 pull has a total length of 4-1/2 in, which slightly exceeds the 96 mm mounting spread and keeps the handle visually balanced on medium-width fronts.
The zinc cabinet handle pull is 11/16 in wide across the front, which maintains a slim profile that works well on narrower rails and modern slab doors or drawers.
The pull has base dimensions of 5/16 in by 5/16 in at each mounting point, which keeps the contact area compact for neat alignment on frames or flat panels.
The Concentric Series pull is made from zinc with a satin nickel finish, which combines a solid metal body with a muted metallic appearance that coordinates with satin nickel hardware.
The Amerock Concentric cabinet pull BP36830G10, with its 3-3/4 in (96 mm) center-to-center spacing, fits projects built around the common 96 mm drilling standard. The zinc material body and satin nickel finish suit decorative hardware and moldings where a consistent metallic look is desired. Dimensions of 4-1/2 in overall length, 11/16 in width, and 15/16 in projection define a compact, usable grip for many cabinet and drawer fronts. For cabinet runs designed around these measurements, this pull offers a matched option across doors and drawers.