Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric pull 96 mm is a zinc cabinet handle from the Concentric collection finished in Golden Champagne, giving cabinet and furniture doors a defined, coordinated look across a room. The 3-3/4 in center-to-center mounting dimension matches common drilling patterns, so existing 96 mm layouts can be reused during refacing or upgrades. The overall 4-1/2 in length gives enough hand contact for confident opening on doors and drawers. A 15/16 in projection holds fingers clear of the surface while operating the pull, which helps reduce contact marks around high-use fronts. The 11/16 in width provides a slim profile that still presents a solid grip line across the front. Base dimensions of 5/16 in by 5/16 in concentrate the load at each mounting point, which supports firm attachment on properly prepared cabinet faces.
This Amerock Concentric Series pull uses a 3-3/4 in center-to-center hole spacing, so two mounting points are set 96 mm apart along the door or drawer front. That spacing aligns with many factory cabinet drilling jigs, which supports repeatable positioning during runs of doors or drawers. The pull body length of 4-1/2 in extends beyond the hole locations, giving a clear visual reference for leveling and alignment relative to door rails or drawer edges. With a projection of 15/16 in, the working depth from the mounting surface to the front of the pull is defined, which helps plan around adjacent doors or tall drawer fronts. Base dimensions of 5/16 in by 5/16 in at each end concentrate bearing at the contact points, supporting a secure interface when the mounting area is prepared to match the footprint.
The Amerock Corporation BP36830BBZ pull belongs to the Concentric collection and sits in the Handles and Pulls category, positioning it for use on cabinet doors and drawers in woodworking projects. Its 3-3/4 in (96 mm) center-to-center dimension corresponds to a widely used spacing, so this pull can be mounted where that drilling pattern is present on casework or furniture. The 4-1/2 in overall length gives proportion suitable for many standard-sized doors and medium-width drawers, which supports a consistent appearance when repeated across a bank of cabinets. With a Golden Champagne finish over a zinc body, the pull brings a distinct color tone that can be matched with other Golden Champagne elements in the same room, aiding visual continuity. The compact 5/16 in by 5/16 in bases allow placement on narrower rails without excessive overhang at the mounting points.
The 3-3/4 in center-to-center measurement on this Amerock Concentric cabinet pull directly supports the use of common drilling templates and jigs, which can speed repetitive installations across multiple doors or drawer fronts. Zinc construction provides a consistent substrate for the threaded 8-32 screw interface, helping installers achieve predictable tightening at both ends. The 15/16 in projection defines the operating depth, so hands can pull doors without dragging across the face, which is useful on frequently used fronts. At 11/16 in width, the pull offers a defined gripping surface while still keeping a low visual profile along the cabinet line. The Golden Champagne finish ties into the overall Concentric collection identity, allowing projects that specify this finish to maintain the same tone from handle to handle and across related Amerock hardware selections.
The Amerock BP36830BBZ pull has a 3-3/4 in (96 mm) center-to-center, 4-1/2 in overall length, 15/16 in projection, 11/16 in width, and 5/16 in by 5/16 in base dimensions for layout planning.
The Amerock Concentric Series BP36830BBZ pull is made from zinc with a Golden Champagne finish, providing a defined metallic appearance for cabinet doors and drawers.
The 3-3/4 in (96 mm) center-to-center spacing on this pull matches a common drilling standard, which supports the use of typical cabinet hardware templates during drilling and mounting.
The BP36830BBZ pull projects 15/16 in from the mounting surface, defining working hand clearance and helping installers evaluate door and drawer spacing relationships.
The Amerock BP36830BBZ pull specifies 8-32 x 1 in screws, which correspond to the threaded mounting interface in the zinc body at each end of the pull.
The 11/16 in width of the BP36830BBZ pull creates a slim bar profile that still presents a clear gripping edge along cabinet doors and drawers.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center Golden Champagne pull BP36830BBZ combines a known drilling standard with defined dimensions for practical cabinet work. The 4-1/2 in length, 15/16 in projection, and 11/16 in width create a usable gripping profile while keeping fronts visually clean. Zinc construction with a Golden Champagne finish places this pull within Amerock Corporation decorative hardware lines, aligning with the Handles and Pulls category for woodworking projects. For cabinet runs, door replacements, or furniture builds that call for a 96 mm pattern and this finish, this pull offers consistent, cataloged dimensions ready to be integrated into layout and drilling plans.