Amerock Concentric cabinet pull gives a 3-3/4 in (96 mm) center-to-center layout, which sets consistent handle spacing across doors and drawers for a clean, repeatable run on cabinetry. The overall 4-1/2 in length creates a defined grip area that suits common drawer and door widths in kitchens, baths, and built-ins, so layouts stay visually balanced along a bank of fronts. A gunmetal finish establishes a dark, modern tone on the zinc pull body, which helps tie together hinges, faucets, and other hardware in the same color family. The zinc construction provides a solid-feeling handle body that supports everyday opening and closing on frequently used cabinets. With its Amerock Corporation branding and Concentric collection identity, this pull matches cataloged lines and makes it straightforward to standardize hardware style on a project.
The Concentric 96 mm center-to-center spec fixes the distance between mounting points, which is important when drilling new fronts or matching pre-bored patterns on replacement work. The 4-1/2 in overall length then frames how the handle sits relative to panel edges, guiding vertical and horizontal placement for a consistent sightline. A 15/16 in projection governs stand-off from the surface, influencing finger access behind the pull on doors and drawer fronts of varied thicknesses. With an 11/16 in width and compact 5/16 in by 5/16 in bases, the pull lands neatly on face frames and slab fronts, which helps keep the hardware clear of edge profiles and adjacent reveals.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center gunmetal pull is suited to cabinet doors and drawers that are drilled for the same 96 mm spread, so layouts stay uniform across a project. Its 4-1/2 in length positions the grip zone comfortably on standard-width drawers and doors, supporting use on kitchen base cabinets, wall cabinets, and bath vanities. The gunmetal finish allows the pull to visually coordinate with other dark-toned fittings, so it can be used to tie together an entire hardware schedule within the Concentric collection. Because the pull belongs to Amerock decorative hardware and moldings in the handles and pulls class, it fits as a primary opening point on residential or light commercial cabinetry that is designed around decorative pulls.
The 96 mm center-to-center drilling dimension standardizes hole placement, which makes it practical to repeat drilling patterns or align with shop-made jigs when preparing multiple fronts. A 15/16 in projection keeps the pull close to the door or drawer surface while still creating space for fingers, reducing the chance of knuckles contacting the cabinet face during use. The 11/16 in width and 5/16 in by 5/16 in base dimensions define a compact footprint, which helps when aligning pulls on narrow rails or tight stile conditions where edge distances matter. The zinc construction gives the pull a solid body for daily operation, while the Amerock gunmetal finish sets the visible surface that installers and clients coordinate with other room finishes. Together, the specific dimensions and materials of the Concentric pull help achieve a repeatable, professional appearance on completed cabinets.
The Amerock Concentric Series pull has a 3-3/4 in (96 mm) center-to-center measurement, which sets the exact distance between mounting holes on cabinet doors and drawers.
The Amerock BP36830GM cabinet pull has a 4-1/2 in overall length, which defines the footprint on the cabinet face and influences how it aligns on doors and drawers.
This Concentric 96 mm center-to-center cabinet pull has a 15/16 in projection, setting how far it stands off the surface and affecting finger clearance behind the handle.
The Concentric pull width is 11/16 in, and each base measures 5/16 in by 5/16 in, which defines the visible profile and contact area on the cabinet face.
The Amerock Concentric pull uses zinc material with a gunmetal finish, setting both the underlying metal and the visible color tone on cabinetry.
The manufacturer part number for this Amerock Concentric Series gunmetal pull is BP36830GM, which identifies the specific 96 mm center-to-center model.
The Amerock Concentric cabinet pull with 3-3/4 in (96 mm) center-to-center drilling, 4-1/2 in length, and 15/16 in projection gives a defined set of dimensions to build consistent layouts on doors and drawers. The gunmetal finish on a zinc body sets both color and material in one part number, BP36830GM, which simplifies matching across a project. Use these verified measurements and finishes to align hole drilling, sightlines, and hardware appearance wherever a 96 mm Concentric pull is specified.