Amerock Concentric cabinet pull in polished nickel gives cabinets a defined, geometric look, using the Concentric Collection design to keep a consistent style across doors and drawers. The pull is made from zinc, which provides a solid metal feel and keeps the piece stable under everyday use on frequently opened fronts. A center-to-center dimension of 3-3/4 in (96 mm) sets the mounting hole spacing, so existing or new drilling follows a common layout used on many cabinet runs. Overall length of 4-1/2 in gives fingers enough room to grip across the pull. A projection of 15/16 in stands the handle off the face just under an inch, helping hands clear the door surface during operation. Width of 11/16 in presents a narrow front edge, which keeps the look streamlined while still giving contact area for confident pulls.
The pull is drilled for a 3-3/4 in (96 mm) center-to-center spacing, which fixes the distance between mounting points and guides hole placement during layout. This spacing pairs with common cabinet boring patterns, simplifying alignment when repeating the pull across multiple openings. The screw size specified as 8-32 x 1 in sets the thread and length needed for attachment, which matters when selecting or using fasteners that pass through typical cabinet door and drawer front thicknesses. With base dimensions of 5/16 in by 5/16 in at each end, the pull seats on a small contact area, supporting use on narrow rails without crowding decorative profiles.
The pull is part of the Amerock Concentric Collection, so its form is suited to installations where a unified Concentric Series look is carried across multiple fronts. The 96 mm (3-3/4 in) center-to-center dimension places the pull in a common mid-size class, fitting layouts on both doors and drawers that benefit from a unified drilling grid. Overall length of 4-1/2 in means the pull spans enough surface to look proportional on standard cabinet widths, avoiding an undersized appearance on most kitchen or bath fronts. The polished nickel finish ties into projects that already specify polished nickel decorative hardware and moldings, which helps maintain a consistent color and sheen across knobs, pulls, and other Amerock components. With a width of 11/16 in, the pull presents a lean face that works visually on flat panels and on more detailed profiles without overwhelming the design.
The fixed center-to-center measurement of 3-3/4 in (96 mm) lets installers set up jigs or boring patterns once and repeat them, which supports straight, level hardware lines from cabinet to cabinet. Projection of 15/16 in controls how far the hand moves away from the door surface, aiding comfortable grip while limiting interference with nearby doors or trim. Base dimensions of 5/16 in by 5/16 in at each mounting point define a tight footprint, which can be useful when positioning the pull close to panel edges or narrow rails without overlapping edges. The zinc material adds mass to the pull body, helping it feel substantial each time a door or drawer is opened and closed. The polished nickel finish offers a reflective face that can tie into lighting, as the glossy surface can pick up highlights from under-cabinet or room fixtures for a coordinated appearance. The screw specification 8-32 x 1 in identifies a standard machine screw thread used for many cabinet fronts, which aligns with typical shop tooling and tap expectations.
The pull uses 3-3/4 in (96 mm) center-to-center spacing, which establishes the distance between holes and helps align multiple pulls in straight, repeatable runs.
The pull measures 4-1/2 in in overall length and 11/16 in in width, so it presents a modest footprint while remaining easy to grab on doors and drawers.
The projection is 15/16 in, giving just under an inch of stand-off so fingers clear the cabinet face during use without the pull extending excessively.
The handle is made from zinc, providing a metal construction that supports everyday cabinet use while giving the pull a solid feel in hand.
The pull has a polished nickel finish, which delivers a bright, reflective surface that coordinates with other polished nickel decorative hardware elements.
The specified screw size is 8-32 x 1 in, matching a common cabinet hardware thread and length for fastening through standard cabinet doors and drawer fronts.
The Amerock Concentric Series 3-3/4 in (96 mm) center-to-center polished nickel pull BP36830PN offers a defined set of dimensions that suit repeatable cabinet layouts. With zinc construction, 4-1/2 in overall length, 15/16 in projection, and 11/16 in width, it balances grip space with a streamlined profile. The polished nickel finish coordinates with other polished nickel decorative hardware and moldings on the job. For cabinet runs built around the Concentric Collection and 96 mm drilling, this pull provides a consistent mounting standard and appearance across doors and drawers.