Amerock Concentric pull 128mm center to center describes a zinc cabinet pull from Amerock Corporation designed for applications where a 5-1/16 in center-to-center mounting layout is already set, so it lines up cleanly with existing drilled holes on doors or drawers. The pull uses a polished nickel finish that creates a bright, reflective surface, which helps match installations that already feature polished nickel decorative hardware for a consistent look across a project. The overall length of 5-3/4 in gives enough hand contact area for comfortable grasping on typical cabinet faces, helping drawers and doors move without finger strain in repeated daily use. A projection of 15/16 in positions the grip away from the door or drawer face, which provides finger clearance between the pull and the surface during operation. The 11/16 in width gives a balanced, compact profile that fits well on both narrow and wider fronts without overwhelming the design.
This Amerock Concentric polished nickel pull uses a fixed 5-1/16 in (128 mm) center-to-center dimension between mounting points, which matches many standard cabinet drilling patterns and helps streamline layout during installation. The 5-3/4 in overall length means the pull slightly overhangs the drilling spread on each side, creating a balanced look across typical drawer fronts and door rails. With a projection of 15/16 in, the pull stands off the face just under an inch, giving enough space for fingers to wrap behind without contacting the cabinet surface while operating doors or drawers. The 11/16 in width keeps the pull slim, which helps it sit comfortably on narrow rails or smaller drawer fronts where space is tight but a full hand grip is still desired.
The Amerock Concentric Series pull with 5-1/16 in center-to-center spacing is well-suited for cabinet doors and drawers laid out around the common 128 mm drilling standard, so it fits into many predrilled or templated patterns used in shops. Its 5-3/4 in overall length provides a proportional look on medium-width cabinet fronts, helping maintain visual balance when installed in rows across kitchen, bath, or built-in cabinetry faces. The polished nickel finish offers a bright, mirror-like appearance that coordinates with polished nickel decorative hardware and plumbing fixtures, which keeps finishes aligned across casework, sinks, and fittings. Because the pull is made from zinc, it supports consistent casting of the Concentric design details along the handle and at the bases, so multiple pulls installed side by side present a uniform style. The base dimensions of 5/16 in by 5/16 in at each end define a compact contact area against the cabinet surface, which allows the pull to sit neatly on narrow rails or frame sections without crowding edges. With a projection of 15/16 in, the pull offers workable clearance between the hand and the door or drawer surface as it is operated, helping reduce knuckle contact on raised panels, applied moldings, or face frames during frequent use.
The defined 5-1/16 in (128 mm) center-to-center spacing provides a clear drilling dimension that supports the use of jigs, templates, or CNC programs, which helps installers and shops repeat the same layout across multiple fronts with minimal variation. The 8-32 x 1 in screw size specified for this pull matches a common machine screw standard in cabinet hardware, simplifying matching thread patterns where existing 8-32 tapped holes or inserts are in place. The 15/16 in projection dimension gives a predictable stand-off from the door or drawer surface, so designers can plan clearances relative to adjacent doors, appliance fronts, or wall surfaces. The 11/16 in width offers a consistent bar thickness to reference when aligning multiple pulls by sightline, helping maintain a straight, clean visual run along drawer banks. The Amerock BP36831PN part number directly ties these dimensions, the zinc material, and the polished nickel finish together, which aids in specifying the exact pull required on drawings, cut lists, or order forms. Being part of the Concentric collection means this pull shares styling cues with other Concentric pieces, so hardware schedules can combine this size with related items while still keeping a cohesive design language throughout the project.
The Amerock Concentric BP36831PN pull uses a 5-1/16 in (128 mm) center-to-center dimension, so it matches layouts drilled or designed around the common 128 mm cabinet hardware standard.
The BP36831PN pull has a 5-3/4 in overall length, giving slight overhang beyond the 5-1/16 in mounting spread for a visually balanced look on typical cabinet fronts.
The Amerock Concentric pull projects 15/16 in from the mounting surface, providing finger clearance between the grip and the cabinet face during normal door and drawer operation.
The pull is made from zinc with a polished nickel finish, giving a cast metal body with a bright, reflective surface that coordinates with other polished nickel hardware.
This Amerock Concentric pull specifies 8-32 x 1 in screws, which aligns with a common cabinet hardware thread size used for mounting pulls to doors and drawers.
Each base on the pull measures 5/16 in length by 5/16 in width, creating a compact footprint at each mounting point against the cabinet surface.
The Amerock Concentric Series 5-1/16 in (128 mm) center-to-center polished nickel pull brings a defined drilling dimension, a 5-3/4 in overall length, and a 15/16 in projection together in one part number, BP36831PN, so cabinets and drawers can be laid out and detailed around known hardware geometry. With a zinc body, polished nickel finish, and compact 5/16 in by 5/16 in base footprint, this pull offers a coordinated option for projects calling for Concentric collection styling on medium-width fronts. Use these verified dimensions and material details to specify the Amerock Concentric polished nickel pull wherever a 128 mm center-to-center layout and matching finish are required across your cabinetry.
Sold In: 1 Each