Amerock Concentric Series 6-5/16 in (160 mm) Center to Center Golden Champagne Pull, -BP36832BBZ

Amerock Concentric Cabinet Pull For Precise Alignments

Amerock Concentric cabinet pull uses a 6-5/16 in (160 mm) center-to-center layout to give cabinets a consistent, repeatable handle spacing that keeps lines straight across doors and drawers. The pull is part of Amerock Corporation's Concentric collection, so it follows a defined design family when you are matching hardware in a room. Its 7 in overall length provides a comfortable grip span that works across most standard cabinet fronts without crowding panel details. The pull is made from zinc, which gives a solid feel while keeping weight manageable when you are installing multiple pieces on a large run of cabinetry. A golden champagne finish provides a warm metallic tone that visually softens against wood or painted surfaces, helping this pull coordinate with both light and dark finishes. The 11/16 in width offers a balanced look that reads substantial without overpowering narrower drawer fronts.

Key Concentric Pull Details That Support Your Work

• The 6-5/16 in (160 mm) center-to-center dimension matches common drilling patterns, so existing 160 mm holes can be reused for straightforward replacements and new layouts can be laid out with a single consistent jig setting.
• The 7 in length gives enough hand clearance for a firm grip on cabinet doors and drawers, which helps when opening heavier fronts while still leaving margin from edge profiles and neighboring hardware.
• The 15/16 in projection holds the hand away from the cabinet face just under an inch, which reduces knuckle contact with the door or drawer surface while keeping the pull from sticking too far into walking paths.
• The 11/16 in width offers a slim profile that still reads as a full handle, which helps maintain a clean visual line on contemporary fronts while providing enough surface area for a confident grasp.
• The 5/16 in by 5/16 in base dimensions create a compact footprint at the contact points, which helps the pull sit neatly on narrow rails and stiles without overlapping edges or decorative profiles.
• The golden champagne finish gives a muted metallic look, which can tie together other warm-toned hardware and fixtures in the same space for a coordinated appearance.

Installation Measurements For Amerock Concentric 160 Mm Pull

The Amerock Concentric 160 mm pull is built around a 6-5/16 in center-to-center dimension, so hole placement is straightforward when you are drilling new fronts or aligning to existing 160 mm bores. Its 7 in overall length leaves a small margin beyond the mounting holes at each end, which helps keep the handle visually centered on rails while avoiding interference with neighboring edges. A 15/16 in projection defines how far the pull stands off the cabinet face, giving room for the hand without creating a snag point on passing traffic. The 11/16 in width keeps the profile slim, which is helpful on narrow drawers where available face height is limited. Base dimensions of 5/16 in by 5/16 in at each post define the contact area, supporting a crisp seating point on flat cabinet surfaces.

Using This Amerock Golden Champagne Pull In Projects

Where This Golden Champagne Cabinet Handle Fits Best

The golden champagne finish on this pull provides a soft metallic tone that works with many cabinet colors, so it can sit comfortably on both stained wood and painted fronts when a warm look is needed. As part of the Concentric collection, the pull aligns with other Amerock pieces that share similar styling, which supports consistent hardware choices across kitchens, baths, and built-ins using the same design language. Its 7 in length paired with a 6-5/16 in center-to-center spacing means it suits medium to larger cabinet doors and drawers where a longer handle is visually appropriate. The 11/16 in width presents a narrow front edge, which suits clean-lined or transitional door styles that do not need a bulky pull. A 15/16 in projection provides day-to-day clearance for fingers between the pull and the cabinet face, which is helpful on frequently used doors such as kitchen base cabinets. The zinc material keeps the pull robust enough for repeated use, which is important on doors and drawers that get opened many times daily in active spaces.

Why These Dimensions Support Consistent Cabinet Results

The 6-5/16 in (160 mm) center-to-center dimension standardizes drilling, which simplifies template setup when you are running a series of fronts that all share the same hardware layout. With the pull measuring 7 in in total length, there is a predictable overhang beyond each mounting point, which makes it easier to visually balance the pull on varying drawer widths using the same measurement. The 15/16 in projection keeps the handle close enough to the cabinet face to avoid catching on clothing, while still offering ample space for the hand, which supports comfortable operation on both doors and drawers. An 11/16 in width concentrates the grip into a slimmer bar, which can help doors swing freely near adjacent walls or appliances where clearance is limited. The 5/16 in by 5/16 in base dimensions define compact posts at each end, helping the pull seat cleanly on flat rails without covering up molding details. The use of zinc material provides a sturdy core for the pull shape, which supports consistent performance when multiple units are installed across a high-use bank of cabinets.

Common Questions About Amerock Concentric 160 Mm Pull

Select This Pull For 160 Mm Cabinet Runs

The Amerock Concentric 6-5/16 in (160 mm) center-to-center golden champagne pull gives installers a defined drilling pattern and clear dimensions for consistent cabinet layouts. Its 7 in length, 15/16 in projection, and 11/16 in width support everyday handling on doors and drawers. Zinc construction and compact 5/16 in by 5/16 in bases provide a solid, neat attachment footprint on cabinet faces. With a warm golden champagne finish and Concentric collection styling, this pull fits projects that call for coordinated hardware. Use these verified dimensions and material details to match this pull to your next cabinet hardware layout.