Amerock Concentric Series 6-5/16 in (160 mm) Center to Center Gunmetal Pull, -BP36832GM

Amerock Concentric 160mm Gunmetal Pull For Cabinets

Amerock Concentric 160mm gunmetal pull is a zinc cabinet handle that provides a 6-5/16 in center-to-center mounting span, so it lines up with standard drill patterns on many cabinets and drawers. The gunmetal finish gives a dark, modern look that helps visually update casework while staying neutral with a range of surfaces. The pull has a 7 in length, giving larger finger clearance across the front of the door or drawer. Its 15/16 in projection sets the grip off the face enough for a solid handhold while keeping it tight to the cabinet front for a clean profile. With a width of 11/16 in, the pull presents a narrow front edge that looks refined while still easy to grasp. Base dimensions of 5/16 in by 5/16 in keep the contact area compact for a crisp mounting footprint.

Key Amerock Concentric Pull Details For Projects

• The 6-5/16 in center-to-center dimension matches common boring patterns, which helps installers reuse existing holes on replacement jobs and speeds layout on new cabinet runs.
• The 7 in overall length spreads the pull visually across the face, which balances wider drawers and doors and gives users more grip area when opening heavier fronts.
• The 15/16 in projection spaces the handle off the surface, which creates comfortable finger clearance without the pull sticking out too far into walkways or tight galley runs.
• The 11/16 in width keeps the profile slim, which works well on contemporary cabinet styles where a streamlined look is preferred without sacrificing everyday usability.
• The zinc material provides a solid-feeling pull body, which supports repeated opening and closing cycles in active kitchen, bath, or shop environments.
• The gunmetal finish defines the color tone, which allows designers and installers to confidently coordinate this pull with similar dark fixtures or contrasting door finishes.

Mounting And Size Details For Cabinet Fit

This Amerock Concentric cabinet pull uses a 6-5/16 in center-to-center mounting layout, so hole spacing is clearly defined for drilling or aligning to existing bores. The 7 in length works with this spacing to center the grip over the mounting points, which creates a stable feel when the pull is in use. A projection of 15/16 in sets the stand-off from the door or drawer face, influencing how fingers hook behind the pull during opening. The 11/16 in width and 5/16 in by 5/16 in base dimensions control how much of the pull contacts the surface, which matters when lining up multiple pulls in a straight visual run across several fronts.

Using This Amerock Concentric Pull In Builds

Where This 160mm Gunmetal Pull Works Well

The Amerock Concentric Series 6-5/16 in (160 mm) center-to-center gunmetal pull is suited for cabinet and drawer fronts that match its 6-5/16 in drilling span, because the specified spacing sets the hole layout for every front. In kitchens or baths that use dark or mixed-metal hardware, the gunmetal finish coordinates the pulls with other fixtures, creating a consistent look across doors and drawers. On wider fronts, the 7 in length visually anchors the pull, helping the hardware feel proportional to the cabinet size. In shop or office casework, the zinc construction provides a firm grip point for frequent daily use while maintaining the same dimensional standards across a full run of cabinets.

How The Verified Dimensions Support Consistent Results

The 6-5/16 in center-to-center measurement on this Amerock BP36832GM pull sets an exact drilling pattern, which helps jigs and templates deliver repeatable hole placement from front to front. The 160 mm classification aligns with metric layout, which can simplify planning when working from metric-based cabinet drawings. The 15/16 in projection and 11/16 in width together define the clearance envelope, guiding door spacing in tight banks where handles could otherwise conflict. The compact 5/16 in by 5/16 in base dimensions create a small contact footprint, which helps align the pull precisely to layout lines, keeping hardware straight across long runs. Because the pull is zinc with a gunmetal finish, the material and color combination stay consistent from piece to piece, supporting uniform appearance on large installations.

Common Amerock BP36832GM Pull Buyer Questions

Selecting This 160mm Gunmetal Pull For Work

The Amerock Concentric Series 6-5/16 in (160 mm) center-to-center gunmetal pull BP36832GM offers defined dimensions, a zinc construction, and a gunmetal finish, giving installers a consistent cabinet and drawer handle option for projects that match its 160 mm drilling pattern.