Amerock Concentric 6-5/16 in pull is a zinc cabinet handle in the Concentric collection finished in polished nickel, so it delivers a consistent decorative look that matches other Amerock cabinet hardware on the same project. The 6-5/16 in (160 mm) center-to-center mounting dimension sets precise hole spacing, helping installers drill or bore repeatable layouts across multiple cabinet doors and drawers. A 7 in overall length gives enough hand clearance along wider fronts while maintaining a balanced, proportional appearance on standard cabinet faces. The 15/16 in projection brings the pull out from the surface just enough for fingers to grab without feeling bulky on the door. An 11/16 in width keeps the profile slim, which helps the pull sit neatly on narrow rails or drawer fronts. The Amerock Corporation brand and BP36832PN part number support consistent reorders across jobs.
The 6-5/16 in (160 mm) center-to-center dimension on this Amerock Concentric pull defines the distance between mounting holes, so it directly drives drilling layout on new cabinet doors and drawers. A 7 in overall length gives installers a clear reference when aligning the pull to stiles, rails, or drawer edges. The 15/16 in projection sets how far the handle stands off the face, which affects hand clearance when opening doors near walls or adjacent cabinets. An 11/16 in width keeps the footprint compact, which suits narrow frames or small drawer fronts. Base dimensions of 5/16 in by 5/16 in at each post define the contact area on the cabinet surface, guiding positioning relative to panel lines, bead details, or edge profiles to keep hardware centered and square.
This Amerock zinc cabinet handle from the Concentric collection suits cabinet doors and drawers where a 6-5/16 in (160 mm) center-to-center layout is desired, because that dimension matches the pull's mounting spread. The polished nickel finish supports projects that coordinate with polished nickel faucets, hinges, and other decorative hardware, keeping finishes aligned across kitchens, baths, or built-ins. The 7 in overall length gives this pull enough visual presence on base cabinets, islands, and tall pantry units, helping it read correctly on larger fronts. An 11/16 in width and 15/16 in projection keep the handle comfortable to grasp while staying trim enough for upper cabinets or smaller drawer faces. The BP36832PN part number identifies this exact configuration so shops and installers can specify or reorder the same pull across phases of a project.
The 6-5/16 in (160 mm) center-to-center measurement on this Amerock polished nickel cabinet pull lets installers align drilling jigs or CNC programs to a single standard dimension, which supports repeatable hole placement from cabinet to cabinet. The 7 in overall length offers a reliable reference for positioning the pull relative to door and drawer edges, improving alignment from one front to the next in a run. A 15/16 in projection sets a predictable standoff from the cabinet face, which helps maintain consistent hand clearance even when cabinets are installed tight to walls or appliances. The compact 11/16 in width and 5/16 in by 5/16 in base dimensions let the pull sit neatly on narrow frames, aiding alignment with rail centers without overlapping decorative profiles. Using the BP36832PN identifier across drawings and orders helps shops match this specific Concentric collection pull whenever the same size and finish are required.
The Amerock Concentric 6-5/16 in pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets the hole spacing for drilling or boring cabinet doors and drawers.
The BP36832PN Amerock Concentric pull measures 7 in in overall length, giving a clear reference for centering the handle on doors and drawers.
The Amerock polished nickel cabinet pull projects 15/16 in from the cabinet surface, providing finger clearance without extending excessively into the room.
The Amerock zinc cabinet handle is 11/16 in wide, giving a slim profile suited to narrow rails or smaller drawer fronts.
The BP36832PN pull has base dimensions of 5/16 in by 5/16 in at each post, defining the contact footprint on the cabinet surface.
This Amerock Concentric cabinet pull is made from zinc with a polished nickel finish, combining solid metal construction with a bright matching surface.
The Amerock Concentric Series 6-5/16 in (160 mm) center-to-center polished nickel pull BP36832PN combines zinc construction, a 7 in overall length, and a 15/16 in projection to support consistent cabinet hardware layout. The 11/16 in width and 5/16 in by 5/16 in base dimensions help it sit cleanly on doors and drawers sized for this spread. For projects planned around a 6-5/16 in center-to-center pattern in polished nickel, this Concentric collection pull from Wurth Baer Supply offers a defined size and finish that can be specified by part number across the job.