Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric matte black pull is a zinc cabinet handle designed around a 7-9/16 in (192 mm) center-to-center dimension, so it spans common drawer and door boring patterns with a single, consistent drill layout. The 8-1/4 in overall length gives this pull enough hand clearance across wider drawer fronts while still fitting comfortably on standard cabinet doors. A 15/16 in projection sets the grip away from the face just enough for fingers to grab without crowding adjacent fronts. The 11/16 in width creates a slim front profile that reads clean on face frames or frameless applications. Matte black finish keeps light reflection low, which helps this pull sit quietly against both light and dark cabinet surfaces. Zinc construction provides a solid-feeling handle body that suits everyday cabinet and drawer use.
The 7-9/16 in (192 mm) center-to-center measurement on the Amerock Corporation BP36833MB pull defines exactly where to drill through the door or drawer, supporting repeatable layout across a project. With the overall length at 8-1/4 in, there is a predictable reveal beyond each mounting point, which helps when centering the pull on different front sizes. The 15/16 in projection positions the gripping surface a set distance from the face, important when fronts sit near walls or tall adjacent doors. Base dimensions of 5/16 in by 5/16 in at each end mark a compact footprint, which helps when fitting the pull onto narrow rails or stile areas.
This Amerock Concentric Series pull uses zinc material, so the handle body is suited to typical cabinet and drawer fronts in residential or light commercial woodworking. The 7-9/16 in (192 mm) center-to-center layout aligns with larger drawer or door fronts where a longer pull looks proportional. With an 8-1/4 in length, this pull fits well on drawer widths that need more visual span than a small handle provides. The matte black finish integrates with dark painted cabinets where a low-contrast pull is preferred, and it also stands out as a defined line on light surfaces. The 11/16 in width keeps the pull from dominating narrow rails, which helps maintain visual spacing on smaller doors.
The defined 7-9/16 in (192 mm) center-to-center spacing on the Amerock BP36833MB pull gives installers a fixed drilling reference, supporting jig setup and repeated boring on multiple fronts. The 15/16 in projection sets a consistent finger clearance, reducing variation in how far different pulls stand off the face across a kitchen run. With the overall 8-1/4 in length, alignment from edge to edge stays predictable when centering the pull on various drawer widths. The compact 5/16 in by 5/16 in base dimensions localize the contact points, which can be helpful when positioning the pull on narrow frame members or when aligning several pulls along a continuous rail. Together, these measurements create a repeatable pattern that supports clean lines and uniform handle positions across cabinets and drawers.
The Amerock BP36833MB pull has a 7-9/16 in (192 mm) center-to-center, 8-1/4 in overall length, 15/16 in projection, 11/16 in width, and 5/16 in by 5/16 in base dimensions, which guide layout and fit.
The 192 mm center-to-center spacing provides a fixed drilling distance between mounting holes, which supports jig-based boring and consistent alignment across multiple doors and drawers.
The 15/16 in projection sets how far the pull stands off the cabinet face, leaving usable finger clearance while keeping the handle close enough to reduce snagging on passing traffic.
The matte black finish reduces surface glare and reflection, so the pull reads as a dark, understated line on the cabinet face for a quieter visual effect.
The 11/16 in width keeps the pull profile slim, which helps it sit comfortably on narrow rails and lets multiple pulls line up without crowding the cabinet design.
The zinc material forms a solid pull body suitable for typical cabinet and drawer fronts, giving the handle a sturdy feel during regular opening and closing cycles.
The Amerock Concentric matte black pull BP36833MB combines a 7-9/16 in (192 mm) center-to-center layout with an 8-1/4 in overall length, giving a repeatable pattern for doors and drawers that need a longer handle. With zinc construction, a 15/16 in projection, and 11/16 in width, this pull delivers a defined grip area without overwhelming the cabinet front. The matte black finish, centered around these dimensions, lets this handle integrate cleanly into woodworking projects that call for a straightforward, dark cabinet pull solution.