Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric 192 mm pull is a cabinet handle from the Concentric Collection that uses a 7-9/16 in center-to-center mounting, giving a consistent hole pattern that supports straightforward layout across doors and drawers. The zinc construction forms a solid handle body, which supports everyday use on frequently opened fronts in kitchens, baths, or shop cabinets. A gunmetal finish covers the pull, providing a dark, muted tone that works where a modern but not high-gloss look is wanted on face frames or panels. Overall length of 8-1/4 in spans wider rails, helping this pull visually balance on larger drawer fronts. A 15/16 in projection stands the grip off the surface, giving fingers room to grab without scraping knuckles. The 11/16 in width creates a comfortable gripping surface, helping users pull heavier drawers with a steady hand feel.
The 7-9/16 in center-to-center measurement defines the drilling pattern, which allows installers to align new fronts or replacements to this fixed spacing. With an 8-1/4 in overall length, the pull leaves slight overhang beyond the screw points, which helps cover minor drilling chips around the holes. The 15/16 in projection establishes how far the pull stands off the surface, which sets consistent clearance for fingers behind the handle across an entire cabinet run. At 11/16 in width, the pull presents a slim but usable grip area, which fits well on narrow rails where oversized bars might crowd neighboring fronts. Base dimensions of 5/16 in by 5/16 in define the footprint at each contact point, which concentrates load through compact pads for a clean, minimal contact look on the face.
The 7-9/16 in center-to-center layout positions this Amerock Concentric 192 mm pull in projects that use wider handles as a visual anchor, such as base kitchen cabinets or tall pantry doors. Its 8-1/4 in overall length spans much of a standard drawer rail, which helps the pull read proportionally on both 18 in and 24 in drawer widths. The 15/16 in projection gives a nearly 1 in stand-off, which supports use on doors with varying overlays because the hand engages the pull before contacting adjacent faces. With 11/16 in width, the pull remains narrow enough for tight drawer spacing while still presenting a clear front face for grabbing. The gunmetal finish positions this pull for designs targeting a dark, contemporary appearance that coordinates with other gunmetal decorative pieces in the same space.
The fixed 7-9/16 in center-to-center spacing on this Amerock BP36833GM pull lets shops program drilling patterns once, which helps maintain alignment when doors or drawers are produced in batches. Its 8-1/4 in total length leaves measurable margins outside the screw locations, which can help visually mask slight variances in hole placement along the rail. A 15/16 in projection keeps the hand away from the cabinet face during operation, which reduces contact wear on finished surfaces over repeated openings. The 11/16 in width controls how far the pull projects in plan view, which matters when aligning handles on adjacent fronts so they do not visually crowd or dominate narrow faces. Zinc material construction supports a solid feel at each touch point, while the gunmetal finish provides a consistent color reference when selecting hinges, knobs, or other gunmetal decorative hardware for the same project.
The Amerock Concentric 192 mm pull has a 7-9/16 in center-to-center dimension, which sets the hole spacing used for drilling cabinet doors and drawers.
The Amerock BP36833GM pull has an overall length of 8-1/4 in, allowing it to span wider cabinet rails and present a substantial grip area on doors and drawers.
This gunmetal cabinet pull projects 15/16 in from the cabinet surface, creating finger clearance between the hand and the door or drawer face.
This Amerock Concentric cabinet handle is made from zinc with a gunmetal finish, giving a solid metal body with a dark metallic appearance for decorative hardware applications.
The Concentric 192 mm pull has a width of 11/16 in, offering a slim but usable gripping surface along the handle face.
Each base on this Amerock cabinet pull measures 5/16 in by 5/16 in, defining a compact contact area where the pull meets the cabinet face.
This Amerock gunmetal cabinet pull combines a 7-9/16 in center-to-center pattern, 8-1/4 in length, and 15/16 in projection, giving a repeatable layout for rows of doors and drawers. The zinc construction and gunmetal finish align well with other Concentric Collection decorative hardware. When a project calls for a dark, contemporary handle that fits these dimensions, this Amerock Concentric 192 mm pull from Wurth Baer Supply offers a clearly defined size set for planning hole locations and visual balance.