Amerock Concentric cabinet pull uses a 10-1/16 in (256 mm) center-to-center layout, which spaces mounting points for standard long-handle runs and helps keep drilling patterns consistent across multiple cabinet faces. The pull measures 10-3/4 in in overall length, so the handle visually spans wider drawer fronts without crowding the edges on typical cabinet layouts. A projection of 15/16 in sets the gripping surface off the door enough for comfortable finger clearance while keeping the pull close to the face for a low-profile look. The 11/16 in width balances a narrow, modern profile with enough surface for a solid grip during daily use. Satin Nickel finish provides a neutral metallic tone that lines up with many hinge and appliance finishes on the same run of cabinets.
The 10-1/16 in center-to-center spec defines the hole spacing for this pull, which lets installers map drilling jigs or CNC programs to that dimension for repeatable mounting. The base dimensions of 5/16 in by 5/16 in at each foot indicate the footprint at the contact points, giving a small, defined landing area against the door or drawer surface. That compact base size helps the pull seat neatly on narrow rails or slim drawer fronts where there is limited face height. Using 8-32 x 1 in screw size connects the pull through typical cabinet door or drawer materials that match this thread standard, tying directly into many existing shop processes and bits.
The 10-1/16 in (256 mm) center-to-center measurement positions this Amerock Concentric pull for runs of larger cabinet doors and wide drawers where a longer handle suits the scale of the face. On tall doors, this spacing supports a longer grip area so hands land naturally along the stile, which can help with smoother opening on heavier fronts. The 10-3/4 in overall length gives the handle a presence that works well on pantry units or base cabinets with broad fronts, tying multiple pieces together with a consistent hardware length. Because the base dimensions are 5/16 in by 5/16 in, the pull can sit on relatively narrow framing members without overhanging edges, keeping the installation inside stiles and rails. The Satin Nickel finish keeps the appearance neutral, so it can serve across kitchen, bath, and built-in cabinetry that already uses satin nickel decorative hardware.
The 15/16 in projection of this pull balances hand clearance with tight clearances between opposing cabinet runs or adjacent appliances, which matters when hardware lines might otherwise clash. This projection, combined with the 11/16 in width, offers a firm gripping surface on wide drawers that see frequent use, aiding daily operation without needing oversized hardware. The zinc material allows Amerock Corporation to form the Concentric design with defined lines, which contributes to a consistent look from pull to pull on large jobs. Using the 8-32 x 1 in screw size ties the handle to a common cabinet thread and length, helping installers match drilling equipment and threads across hardware on the same project. The satin nickel finish works with that formed zinc base to present a unified surface appearance, so the pulls read as a matched set even when used in high-visibility rows or grid layouts on cabinetry.
The Amerock Concentric cabinet pull has a 10-1/16 in (256 mm) center-to-center dimension, which sets the hole spacing for drilling and aligning multiple pulls on cabinet doors and drawers.
The BP36834G10 pull measures 10-3/4 in in overall length, giving it reach across wider doors or drawer fronts so the handle matches the scale of larger cabinet faces.
The satin nickel cabinet pull projects 15/16 in from the cabinet face, providing finger clearance for a comfortable grip while keeping the handle close to the door or drawer surface.
The Amerock Concentric pull is made from zinc with a Satin Nickel finish, combining a stable base metal with a neutral metallic surface that matches satin nickel cabinet hardware.
The pull has an 11/16 in width and base dimensions of 5/16 in by 5/16 in, giving a slim grip profile and compact contact points on cabinet doors and drawers.
The BP36834G10 cabinet handle uses 8-32 x 1 in screw size, aligning with a common cabinet hardware thread for mounting through standard door and drawer materials.
This Amerock Concentric cabinet pull, with its 10-1/16 in (256 mm) center-to-center dimension and 10-3/4 in overall length, suits larger cabinet doors and drawers that benefit from a longer handle. The 15/16 in projection and 11/16 in width provide a slim, functional grip profile that works across kitchen, bath, and built-in cabinetry using satin nickel hardware. With zinc construction, a Satin Nickel finish, and 8-32 x 1 in screw size, this pull aligns with common cabinet hardware standards for scale, layout, and mounting.