Amerock Kamari pull 96mm center to center is a zinc cabinet handle in the Kamari collection that works as a functional and decorative pull for doors or drawers, giving a consistent handhold across matching fronts. The satin nickel finish provides a muted metallic look that blends with many hinge and appliance finishes, helping maintain a unified appearance on a run of cabinets. The pull length of 4-15/16 inches spans more of the drawer or door face than a knob, which spreads hand contact and can feel steadier in daily use. A projection of 1 inch stands the grip off the surface, giving fingers room to grab without rubbing against the front. A width of 1-3/16 inches gives a stable gripping area, which can help reduce twisting when opening heavier fronts.
The 3-3/4 inch center-to-center measurement on the Amerock Kamari satin nickel pull defines the hole spacing for each installation, simplifying layout with standard cabinet jigs sized for this pattern. The pull length of 4-15/16 inches helps installers visually center the handle on a range of drawer fronts while still lining up the 3-3/4 inch boring. A projection of 1 inch and width of 1-3/16 inches set the working envelope off the face, which can be factored into clearances when doors swing past adjacent panels or appliances. The 3/8 inch by 3/8 inch base dimensions keep the mounting points compact, which aids in placing the pull on narrow rails without overhanging edges.
The Amerock Kamari series 3-3/4 inch center-to-center satin nickel pull is suited to cabinet doors or drawers that use the 96 mm or 3-3/4 inch mounting pattern, so it can align with many bored fronts in shops using that standard. Its 4-15/16 inch overall length works on small to mid-size drawer fronts, providing enough bar for a full hand grip without overwhelming narrower faces. The satin nickel finish presents a neutral metallic tone, which allows this pull to coordinate with satin nickel hinges or other decorative hardware in the same space. With a 1 inch projection and 1-3/16 inch width, the pull creates a defined gripping area that helps users get their fingers behind the bar even when fronts sit close to adjacent cabinets.
The fixed 3-3/4 inch center-to-center dimension on the Amerock BP36822G10 cabinet pull lets installers repeat the same boring layout across a job, which helps doors and drawers line up visually. The zinc construction offers a solid-feeling part that can hold its shape at the 3/8 inch by 3/8 inch bases, supporting stable contact at each mounting point. A projection of 1 inch places the gripping surface closer to the door or drawer, which can minimize interference in narrow walkways while still giving practical clearance for fingers. The 1-3/16 inch width distributes pulling force across a wider bar, helping users open heavier drawers with less concentrated pressure on a single spot. The satin nickel finish presents a consistent surface along the Kamari collection, supporting a uniform look when this pull is repeated across a full bank of cabinetry.
The Amerock Kamari satin nickel pull has a 3-3/4 inch, or 96 mm, center-to-center dimension, which sets the drilling distance between mounting holes on cabinet doors or drawers.
The Amerock BP36822G10 pull measures 4-15/16 inches in overall length, giving extra bar beyond the mounting holes for a fuller hand grip on doors and drawers.
The Kamari cabinet pull has a 1 inch projection from the surface, providing finger clearance while keeping the handle close to the cabinet face in tighter runs.
The Amerock Kamari pull is made from zinc with a satin nickel finish, giving a solid metal feel with a muted metallic look that coordinates with satin nickel hardware.
Each mounting base on the Kamari pull measures 3/8 inch by 3/8 inch, which allows placement on narrower rails without the feet overhanging edges.
The Amerock Kamari satin nickel pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread that aligns with many standard door and drawer installations.
The Amerock Kamari pull 96mm center to center in satin nickel combines a 3-3/4 inch mounting pattern with a 4-15/16 inch overall length, giving consistent layout and comfortable grip across doors and drawers. Its zinc construction, 1 inch projection, and 1-3/16 inch width support solid everyday use in cabinet installations built around this center-to-center spacing.