Amerock Kamari pull 96mm center to center is a zinc handle from the Kamari collection in a gunmetal finish, so it functions as a decorative cabinet pull that also stands up well in everyday kitchen or shop use. The 3-3/4 in center-to-center boring sets the screw holes on a common layout, which simplifies drilling or matching existing cabinet hole patterns during replacements. Overall length of 4-15/16 in gives enough span for a full hand grip, helpful on taller doors and wider drawer fronts. A 1 in projection holds fingers away from the surface, giving comfortable clearance when opening doors under load. The 1-3/16 in width provides a stable gripping surface, which supports consistent handling on frequently used fronts. Compact base dimensions of 3/8 in by 3/8 in keep the footprint tight at each mounting point, which helps when working near panel edges or narrow frame members.
The 3-3/4 in center-to-center layout on this Amerock Kamari pull sets a clear drilling reference, so jigs or CNC patterns can be programmed or set up for repeat cabinet runs without layout changes. Center-to-center at 96 mm also matches common metric boring, which helps when aligning with European-style cabinet systems. Base dimensions of 3/8 in length by 3/8 in width define a compact contact patch at each screw location, allowing placement on narrower rails or stile frames without overhanging edges. A projection of 1 in fixes how far the pull stands off the door, which keeps fingertips clear of the surface while limiting snag potential on walk-by traffic. Width of 1-3/16 in across the grip defines the front face size, giving installers a predictable visual proportion when pairing with various door and drawer sizes throughout a project.
The Amerock Kamari series 3-3/4 in center-to-center gunmetal pull fits work where a defined 96 mm boring pattern is required, so it suits both new cabinet builds and replacements that already follow this spacing. Its role as a decorative handle within the Kamari collection positions it for visible cabinet runs in kitchens, baths, and built-ins where consistent style matters. The gunmetal finish keeps the appearance visually neutral yet distinct, which lets it work across light or dark cabinet finishes in the same room. Because the pull length is 4-15/16 in, it scales well on mid-size doors and drawers, giving enough linear presence without dominating smaller fronts. A width of 1-3/16 in also helps this pull bridge between narrow and wider fronts, providing grip without crowding rail details or edge profiles. Base dimensions of 3/8 in by 3/8 in allow mounting on frame constructions with limited flat area, giving flexibility on face frame or frameless layouts where stile width is tight.
The defined 3-3/4 in center-to-center spacing on the Amerock BP36822GM pull supports consistent drilling across multiple cabinets, which reduces layout time when installers repeat the same pattern on long runs of doors. Its 1 in projection sets a reliable clearance envelope, so doors can be opened comfortably even when fingers are wet, gloved, or under load from heavy contents. The zinc material build gives the pull a solid, single-piece feel, which can make drawer operation feel uniform from one front to the next. The 4-15/16 in overall length provides a fixed edge-to-edge distance that helps align pulls visually along drawer banks, supporting straight sight lines on high-visibility installations. A width of 1-3/16 in also defines how far the grip extends laterally, which helps installers position the pull consistently relative to panel edges or profile details. The compact 3/8 in by 3/8 in base dimensions at each mounting point give a clear visual reference for squaring the pull to door edges, which supports accurate alignment with neighboring hardware pieces.
The Amerock Kamari pull has a 3-3/4 in (96 mm) center-to-center size, which sets a standard drilling distance for consistent cabinet and drawer layouts.
The Amerock BP36822GM Kamari pull is 4-15/16 in long, giving extra grip span that suits mid-size cabinet doors and drawer fronts.
The Kamari series pull is made from zinc with a gunmetal finish, creating a solid metal handle with a dark neutral appearance for various cabinet colors.
This Amerock Kamari zinc cabinet pull projects 1 in from the surface, giving finger clearance for comfortable door and drawer operation.
The pull has a width of 1-3/16 in and base dimensions of 3/8 in by 3/8 in, which supports mounting on narrower rails or stiles.
The manufacturer part number is BP36822GM, which identifies this specific Kamari series 96 mm center-to-center gunmetal pull from Amerock.
The Amerock Kamari gunmetal pull with 3-3/4 in (96 mm) center-to-center spacing gives installers a defined drilling pattern, which supports fast, repeatable layouts across cabinet banks. Its zinc construction and 4-15/16 in overall length provide a solid, practical grip suited to regularly used doors and drawers. The 1 in projection and 1-3/16 in width create predictable clearance and hand contact, helpful for both residential and shop cabinetry. With compact 3/8 in by 3/8 in base dimensions and the BP36822GM identifier, this pull fits smoothly into planned hardware schedules and detailed cabinet drawings.