Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari pull 128mm center to center is a zinc cabinet pull in the Kamari collection with a satin nickel finish, so it provides a defined handle point while matching other satin nickel decorative hardware on the job. The 5-1/16 in center-to-center drilling sets consistent spacing for cabinet door or drawer holes, which helps keep runs of fronts visually aligned across a kitchen or commercial installation. Overall 6-3/16 in length gives fingers room to grab between mounting points, which matters on heavier drawers or wider doors. A 1 in projection sets the pull out from the face just enough for a full grip, which helps when opening loaded cabinets without knuckles hitting the surface. The 1-3/16 in width creates a stable hand contact area, which supports a controlled feel when operating doors and drawers repeatedly.
This Amerock Kamari Series pull uses a 5-1/16 in (128 mm) center-to-center mounting, so hole locations are predictable when aligning with drilling jigs or cabinet shop programs that call out this spacing. The 3/8 in by 3/8 in base dimensions at each mounting point define how much flat area is needed on the face, which matters when working close to panel edges or narrow rails. A 1 in projection sets how far the pull stands off the surface, which helps installers judge door swing clearance near walls or tall cabinet frames. With 6-3/16 in overall length, the pull covers the drilled area and creates a balanced visual proportion on many standard-width drawer fronts.
The Kamari pull in satin nickel from Amerock fits projects where the cabinet hardware needs a 5-1/16 in (128 mm) center-to-center layout, which keeps it aligned with common drilling patterns in many residential and commercial cabinets. The 6-3/16 in overall length suits medium and larger drawer fronts or doors, giving enough bar length for a comfortable grip along the span. Its 1-3/16 in width provides a noticeable visual line across the surface, which works well on frameless and face-frame cabinets where hardware acts as a design element. The satin nickel finish ties into other satin nickel decorative hardware and fittings, which supports a coordinated appearance across kitchens, baths, and storage runs. Zinc construction supports this cabinetry role by giving the pull a metal feel that aligns with other zinc-based pulls in the same Kamari collection.
The 5-1/16 in center-to-center detail on BP36823G10 guides accurate drilling, which helps installers keep hardware rows straight and evenly spaced across multiple fronts. A 1 in projection sets a known stand-off, which supports smooth hand clearance when doors are near adjacent cabinets or appliances. The 3/8 in by 3/8 in base dimensions define the bearing area at each fastener location, which helps avoid overhanging edges when the pull is positioned near narrow stiles. Combined 6-3/16 in length and 1-3/16 in width stabilize the pull visually and functionally, which reduces the tendency for users to pull off-center when operating heavier drawers. The satin nickel finish on zinc provides a consistent surface for everyday cabinet use, which keeps the hardware appearance aligned with other satin nickel Amerock decorative hardware in the same space.
BP36823G10 has 5-1/16 in center-to-center, 6-3/16 in overall length, 1 in projection, and 1-3/16 in width, so it fits standard drilling while giving full hand clearance.
The Amerock Kamari pull is made from zinc, which provides a solid metal body for cabinet doors and drawers in everyday use.
This Kamari cabinet pull has a satin nickel finish, which coordinates with other satin nickel decorative hardware in kitchens, baths, or built-ins.
The 5-1/16 in center-to-center measurement matches a common drilling pattern, which supports consistent hole placement across multiple cabinet fronts.
The 1 in projection sets the pull off the surface, which improves finger clearance and reduces knuckle contact with the cabinet face during operation.
The Kamari satin nickel pull is used on cabinet doors and drawers where a 5-1/16 in center-to-center layout and satin nickel finish are specified.
The Amerock Kamari Series 5-1/16 in center-to-center satin nickel pull BP36823G10 combines zinc construction, a defined 5-1/16 in drilling pattern, and 6-3/16 in overall length, so it fits cabinet layouts calling for this spacing while delivering a satin nickel look. When a project specification lists Kamari in satin nickel with these dimensions, this part number aligns with that callout and supports consistent cabinet hardware across the run. Choose this pull when a 1 in projection and 1-3/16 in width match the desired hand clearance and visual scale on your cabinet doors and drawers.