Amerock Kamari pull 128mm center to center defines this piece as a cabinet and drawer handle designed around a precise 5-1/16 in mounting spread, which helps align with standard drilling patterns for straightforward layout on doors and fronts. The pull is part of the Amerock Kamari collection, so it maintains a consistent style for projects that repeat the same series across a room. Its golden champagne finish provides a specific warm metallic tone that supports matching with other golden champagne components in the same space. The pull uses zinc construction, giving a metal body that works well in typical cabinet environments. Overall length is 6-3/16 in, so the hand contact area extends beyond the mounting holes for an easy grasp. A projection of 1 in sets how far the pull stands off the surface, giving finger clearance while keeping a low profile.
The 5-1/16 in center-to-center drilling dimension is the key mounting reference for the Kamari 5-1/16 in golden champagne pull, guiding hole placement for doors and drawers so each handle lines up consistently across a run. With base dimensions of 3/8 in length by 3/8 in width at each foot, the contact points stay compact, which can be helpful when working on narrow rails or tight stile areas. The 6-3/16 in overall length allows the pull to span wider than the hole centers, setting a balanced look around the fasteners. A projection of 1 in determines how far the pull sits off the face, which directly affects clearance between the hardware and the cabinet surface.
The Kamari zinc cabinet handle 128mm uses a 5-1/16 in center-to-center spread that suits cabinet doors and drawers drilled to that common spacing, helping tie new installations and replacements into existing patterns. Its category placement as decorative hardware and moldings, handles and pulls, defines it for visible cabinet faces rather than concealed roles, which matters when planning exposed hardware layouts. The golden champagne finish gives a defined appearance that pairs with similar finishes on hinges or other visible components, keeping a coordinated look across a kitchen, bath, or built-in installation. Because the pull measures 6-3/16 in in total length, it works well on many standard door and drawer widths where a mid-sized handle is preferred for proportion and hand feel.
The Amerock Kamari cabinet pull centers at 5-1/16 in, so jigs or drilling templates set for 128 mm spacing can be used repeatedly, supporting consistent hole placement across multiple fronts in a job. Each base measures 3/8 in by 3/8 in, concentrating the contact area, which can help when seating the pull cleanly on flat rail sections or narrow frames. The 1 in projection defines the stand-off from the face, giving predictable clearance that helps avoid knuckle contact with the door or drawer surface during use. A width of 1-3/16 in sets the front face size, influencing how the pull lines up relative to panel edges, profiles, or reveals. The zinc material and Amerock branding establish it as part of a known decorative hardware line, helping align this piece with other Amerock Kamari parts specified under the same collection.
The Amerock Kamari pull 128mm center to center uses a 5-1/16 in drilling spread, which aligns with standard 128 mm cabinet drilling for straightforward layout.
The Kamari 5-1/16 in golden champagne pull has a 6-3/16 in overall length, giving a mid-sized footprint that suits many cabinet door and drawer widths.
The Kamari zinc cabinet handle 128mm has a 1 in projection, setting how far it stands off the surface and affecting finger clearance behind the pull.
The BP36823BBZ Amerock Kamari pull is made from zinc, giving a metal construction suited to typical cabinet and drawer use.
The Amerock Kamari cabinet pull uses a golden champagne finish, providing a defined warm metallic tone that coordinates with similar finish hardware.
The Kamari series pull has base dimensions of 3/8 in length by 3/8 in width, giving compact mounting points at each end.
The Amerock Kamari pull 128mm center to center combines a defined 5-1/16 in drilling spread, 6-3/16 in overall length, and 1 in projection into a practical handle layout for cabinets and drawers. Its golden champagne finish and zinc construction tie appearance and material into a single part number, BP36823BBZ, simplifying repeat ordering when matching hardware across multiple cabinets.