Amerock Kamari 128mm gunmetal pull is a zinc cabinet and drawer handle designed around a 5-1/16 in (128 mm) center-to-center layout, so it drops onto standard boring patterns and keeps handle spacing consistent across doors and drawers. The 6-3/16 in overall length gives enough hand clearance along wider fronts while keeping the look controlled on narrower faces. A 1 in projection sets the grip off the surface, providing finger room without catching on clothing in tight traffic paths. The 1-3/16 in width offers a comfortable grasp area that installers can line up visually with rail widths and stile proportions. Compact 3/8 in by 3/8 in base dimensions sit neatly on face frames or slab fronts, helping the pull land cleanly between decorative details. The gunmetal finish delivers a dark, contemporary look that pairs with a wide range of cabinet colors and countertop materials.
The 5-1/16 in (128 mm) center-to-center layout is the key mounting dimension, allowing jigs and drilling templates set for 128 mm spacing to position the Amerock Corporation pull quickly and accurately. With a 6-3/16 in overall length, the handle overhangs the bore pattern slightly at both ends, which helps visually center the hardware on wider fronts while still fitting narrower doors. A projection of 1 in holds the front of the pull at a practical offset, so users can grip from above or below without interference from raised panels. The 1-3/16 in width balances the handle visually on both framed and frameless cabinetry, giving installers a repeatable reference when aligning multiple pulls along a wall of cabinets.
The Amerock Kamari Series pull is specified with a 5-1/16 in (128 mm) center-to-center dimension, so it lines up with metric and imperial drilling centered around 128 mm spacing on cabinet doors and drawers. At 6-3/16 in overall length, the handle scales well on medium to large fronts, from kitchen base cabinets to tall pantry doors, giving enough visual weight without overwhelming narrow faces. Its 1 in projection works on face-frame and frameless boxes where clearance around adjacent fronts matters, keeping the hardware comfortably usable while remaining close to the door plane. The 1-3/16 in width provides a substantial grip area, which is useful on heavier drawer boxes where users prefer a deeper handful of hardware rather than fingertip pulls. With compact 3/8 in by 3/8 in base dimensions, the pull seats cleanly on slim rails and narrow drawer headers, allowing centered placement even when decorative profiles limit flat mounting area.
The specified 128 mm center-to-center distance sets a fixed reference for jig-based drilling, so installers can run rows of Amerock Kamari pulls with consistent alignment from cabinet to cabinet. That known spacing ties directly to the 6-3/16 in total length, which helps lay out edge distances and sight lines when hardware must align with appliance handles or architectural reveals. The 1 in projection defines how far the grip stands off the surface, guiding layout in tight galley kitchens or corridor built-ins where protrusion affects clear passage. A 1-3/16 in width and 3/8 in by 3/8 in base dimensions give precise measurements for shop drawings, letting fabricators model hardware placement relative to panel grooves, glass lites, or applied moldings. The gunmetal finish, called out in the description, sets a dark, refined tone that can be repeated across matching handles and pulls, helping designers maintain a consistent hardware story throughout a project.
The Amerock Kamari Series pull has a 5-1/16 in (128 mm) center-to-center measurement, which aligns with common cabinet drilling patterns and simplifies layout across multiple doors and drawers.
The BP36823GM Kamari pull measures 6-3/16 in in overall length, so it extends slightly beyond the mounting holes for a balanced look on medium and larger cabinet fronts.
The Amerock Kamari gunmetal cabinet pull has a 1 in projection, holding the grip off the door surface for finger clearance while keeping the handle relatively low profile on the cabinet.
The Amerock Kamari Series pull is made from zinc, providing a solid handle body suitable for regular cabinet and drawer use in residential and similar environments.
This cabinet handle has base dimensions of 3/8 in long by 3/8 in wide, which helps it land neatly on narrow rails or slim drawer fronts without crowding edges.
The Amerock BP36823GM pull uses a gunmetal finish, giving cabinets and drawers a dark, modern appearance that coordinates with many wood tones and painted colors.
The Amerock Corporation Kamari pull in gunmetal pairs a 5-1/16 in (128 mm) center-to-center dimension with a 6-3/16 in overall length, giving cabinet makers and installers a predictable hardware footprint on doors and drawers. With a 1 in projection and 1-3/16 in width, the handle offers practical grip depth without excessive protrusion into walkways. Zinc construction and precisely defined base dimensions of 3/8 in by 3/8 in support clean mounting on framed or frameless cabinetry. For projects that call for a gunmetal finish and a 128 mm layout, this BP36823GM pull from Wurth Baer Supply aligns hardware sizing with common cabinet boring patterns.