Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari satin nickel pull is a zinc cabinet handle designed for doors and drawers where a clean, modern look is needed. The 6-5/16 in (160 mm) center-to-center dimension sets consistent hand spacing across a run of fronts, which helps layouts line up visually. Overall length of 7-7/16 in gives good grip area for wider drawers, supporting smooth operation without crowding fingers near the cabinet face. A 1 in projection stands the pull off the surface enough for comfortable grasping, which helps when users have wet or gloved hands. Width of 1-3/16 in presents a substantial front profile, so the pull reads correctly on both base and wall cabinets. Satin nickel finish delivers a muted metallic appearance that works in many design schemes, which simplifies hardware selection across a project.
The 6-5/16 in (160 mm) center-to-center measurement on this Kamari pull defines the hole spacing, which directly guides drilling on new fronts or checking against existing bores during replacements. At 7-7/16 in overall length, the pull covers more of the face, which helps mask minor layout variations along a line of doors. The 1 in projection fixes how far the grip sits off the cabinet surface, which influences both user comfort and clearance in corners or near adjacent walls. A front width of 1-3/16 in sets the visible band the user sees, which helps match the pull scale to the cabinet style. Base dimensions of 3/8 in by 3/8 in control the footprint at each mounting point, which is useful when working on narrow rails or stile edges.
This Amerock Kamari cabinet pull, with its 6-5/16 in (160 mm) center-to-center dimension, suits cabinet doors and drawers laid out on metric or fractional drilling systems where consistent spacing is critical. The 7-7/16 in overall length gives it presence on base cabinets and wider drawers, which helps hardware scale to larger fronts. A 1 in projection positions the gripping surface away from the face, which is useful on doors with applied moldings or proud edges because the hand lands on the pull rather than trim. The 1-3/16 in width presents a defined visual stripe across the front, which helps align design lines when using multiple pulls in a kitchen, bath, or shop installation.
The defined 6-5/16 in (160 mm) center-to-center drilling on this BP36824G10 pull allows installers to rely on standard jigs, which speeds repetitive boring across banks of cabinets and limits layout errors. Base dimensions of 3/8 in by 3/8 in at each mounting point keep the contact area compact, which helps when pulls must land close to door edges or within narrow frame members. The 1 in projection is fixed, so once clearances are planned around adjacent doors and walls, the pull behavior remains consistent across the job. Zinc construction gives the pull a solid body, which supports repeated opening and closing in everyday cabinet use. The satin nickel finish provides a controlled, uniform appearance, which helps keep hardware lines visually consistent from one cabinet run to the next.
The Amerock Kamari satin nickel pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets the exact hole spacing for new installations or replacements.
The Kamari BP36824G10 pull measures 7-7/16 in in overall length, which helps it span wider cabinet doors and drawers for better visual proportion.
The Amerock Kamari zinc cabinet handle has a 1 in projection, which sets the distance off the cabinet face for finger clearance and grip comfort.
The Kamari BP36824G10 pull is made from zinc with a satin nickel finish, which delivers a solid feel with a soft metallic appearance on cabinets.
The face of this Amerock Kamari cabinet pull is 1-3/16 in wide, which creates a noticeable visual band across doors and drawers.
Each base on the Amerock Kamari satin nickel pull measures 3/8 in by 3/8 in, which keeps the mounting footprint compact on cabinet frames.
The defined 6-5/16 in (160 mm) center-to-center drilling, 7-7/16 in overall length, and 1 in projection position the Amerock Kamari satin nickel pull as a practical choice for doors and drawers needing consistent layout. Zinc construction and a satin nickel finish support everyday cabinet use while maintaining a controlled look across the run. When a project calls for a cabinet handle with these specific dimensions and appearance, the Kamari BP36824G10 aligns well with that requirement.