Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari cabinet pull is a zinc handle designed to give cabinet doors and drawers a consistent, modern look. The pull uses a 6-5/16 inch (160 mm) center-to-center hole spacing, which matches common drilling patterns and helps streamline layout on new or refaced cabinets. Its overall length of 7-7/16 inches provides a comfortable gripping area, supporting everyday use on kitchen, bath, or shop cabinets. The pull projects 1 inch from the surface, creating enough finger clearance while keeping a low profile that stays close to the cabinet face. A width of 1-3/16 inches gives the pull a solid feel in the hand and a defined visual line on the door or drawer front. The matte black finish offers a uniform, non-reflective appearance that can tie together hinge, knob, and pull selections in the same color family.
The Kamari 6-5/16 inch center-to-center pull is drilled on a 160 mm spacing, so it fits installations planned around that measurement on cabinet doors and drawers. This spacing lets installers align the pull with standard jig hole patterns, which is useful when repeating the same layout across a run of cabinets. The base dimensions of 3/8 inch by 3/8 inch at each foot concentrate contact at the mounting points, so the pull seats neatly over the drilled holes. With a projection of 1 inch, the handle stands out far enough to clear most door profiles, while the matte black finish offers a single, even color that works across face-frame or frameless cabinet styles. The 7-7/16 inch overall length also suits wider drawers, where a longer pull can help distribute everyday pulling force across the hardware.
The Kamari series pull with a 6-5/16 inch (160 mm) center-to-center measurement is suited to cabinets drilled on metric or imperial layouts that match this spacing, covering many kitchen, bath, and built-in storage runs. Its 7-7/16 inch overall length makes it a practical choice for medium to large doors and drawers, where a shorter pull might look undersized or give less grip area. The 1 inch projection pairs well with flat or slightly profiled fronts, because it offers enough clearance without extending too far into walk paths. A width of 1-3/16 inches adds a noticeable bar presence on the face, which can visually anchor taller doors. The matte black finish can support designs that rely on dark hardware to contrast with light cabinet finishes or to blend into darker fronts.
The defined 160 mm center-to-center drilling on this Amerock Kamari cabinet pull helps installers repeat exact hole locations from door to door, which can reduce layout variation across a full kitchen or bank of cabinets. With the 3/8 inch by 3/8 inch base dimensions at each end, the feet cover the drilled holes neatly without extending excessively onto the panel face, supporting a clean, tight look around each mounting point. The 1 inch projection and 1-3/16 inch width work together to create a grip profile that is easy to grab from different angles, which can be helpful on deep drawers or wall cabinets installed above eye level. The zinc construction gives the pull a solid, weighty feel in the hand, reinforcing a sense of sturdiness on doors that are opened many times a day. The matte black finish maintains a single tone along the entire pull, helping rows of hardware look aligned and intentional once mounted.
The Amerock Kamari cabinet pull uses a 6-5/16 inch (160 mm) center-to-center measurement, which sets the distance between the two mounting holes for alignment and layout.
The Amerock BP36824MB pull has an overall length of 7-7/16 inches, giving a wider gripping span that suits medium to large cabinet doors and drawers.
The Kamari series pull projects 1 inch from the cabinet surface, offering finger clearance while keeping the handle close to the door or drawer front.
The Amerock Kamari cabinet pull is made from zinc with a matte black finish, providing a solid metal feel and a uniform dark appearance on cabinet fronts.
The Kamari BP36824MB pull has base dimensions of 3/8 inch by 3/8 inch at each mounting foot, focusing contact at the screw points for a tidy footprint.
The Kamari cabinet pull has a width of 1-3/16 inches, giving a defined bar profile that feels substantial when opening heavier doors or drawers.
The Amerock Kamari cabinet pull combines a defined 6-5/16 inch (160 mm) center-to-center layout with a 7-7/16 inch overall length, giving installers a clear drilling pattern and a generous grip span. Its 1 inch projection and 1-3/16 inch width support everyday use on doors and drawers that see constant handling. The zinc construction with matte black finish ties multiple cabinets into one coordinated hardware look. For projects calling for this size and finish, this pull from Wurth Baer Supply helps bring the layout and visual details together.