Amerock Kamari gunmetal pull is a zinc cabinet handle designed with a 6-5/16 in (160 mm) center-to-center mounting, which spaces the screw holes consistently so doors and drawers line up visually across a run of cabinets. The pull has an overall length of 7-7/16 in, giving enough hand contact area for a firm grip while staying proportional on typical cabinet fronts. A projection of 1 in sets the pull off the face of the cabinet just enough for fingers to hook behind it without snagging clothing. The 1-3/16 in width provides a stable feel in the hand, which helps when opening heavier drawers. Base dimensions of 3/8 in by 3/8 in concentrate the load at each mounting point, helping the pull seat solidly against the surface.
The Kamari pull uses a 6-5/16 in (160 mm) center-to-center dimension, which sets the required hole spacing when drilling or boring fronts. An 8-32 thread size for the mounting screws defines the threaded interface in the pull, so the fasteners engage fully and draw the 3/8 in by 3/8 in bases tight to the surface. The 7-7/16 in overall length and 1 in projection indicate how far the pull spans and stands off the face, which helps plan clearances near adjacent hardware, walls, or appliance doors.
The Kamari Series pull from Amerock Corporation sits in the Handles and Pulls category, so it is suited for cabinet doors and drawers where a bar-style grip is needed. The 6-5/16 in (160 mm) center-to-center size fits layouts that call for a longer pull, useful on wider fronts or banked drawer stacks. Its 7-7/16 in length visually fills more of the panel width, which can help balance tall or wide faces. The 1 in projection keeps the handle close to the cabinet while still allowing fingers behind the bar, which can matter on shallow walkways or tight shop aisles. The gunmetal finish provides a darker tone that can pair with other gunmetal zinc cabinet handle components in the same room for a coordinated look.
The defined 6-5/16 in (160 mm) center-to-center measurement allows repeatable drilling across a full kitchen or office run, which reduces rework when installing multiple pulls. Standard 8-32 threads on the pull give a predictable fastener engagement, which helps the zinc body clamp uniformly against different door and drawer materials. The 1-3/16 in width gives a consistent gripping surface, which users notice when moving from one cabinet section to another. Base dimensions of 3/8 in by 3/8 in set a compact footprint at each mounting point, which helps the pull sit flat while concentrating force around the screw holes. The 1 in projection is fixed across installations, which maintains uniform standoff depth on every front in the project.
The Amerock Kamari gunmetal pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets the hole spacing required for drilling cabinet doors and drawers.
The pull measures 7-7/16 in in overall length, which provides extra bar length beyond the mounting holes for a comfortable hand grip on wider fronts.
The Kamari pull has a 1 in projection, which sets the distance it stands off the cabinet surface to create finger clearance behind the handle.
The pull is made from zinc with a gunmetal finish, which defines both the base metal and the surface color for coordinating project hardware.
Each base on the Kamari pull measures 3/8 in long by 3/8 in wide, which defines the footprint where it contacts and clamps to the cabinet surface.
The Amerock Kamari gunmetal pull uses 8-32 screws, which match the threaded inserts in the pull for securing it to cabinet doors and drawers.
The Kamari Series 6-5/16 in (160 mm) center-to-center gunmetal pull from Amerock Corporation combines defined dimensions and zinc construction to support consistent cabinet layouts. With its 7-7/16 in overall length, 1 in projection, and 1-3/16 in width, it fits projects that call for a longer bar-style handle in a gunmetal finish. Choosing this BP36824GM Amerock pull through Wurth Baer Supply aligns cabinet hardware selection with a known center-to-center pattern and thread size, simplifying planning across multiple doors and drawers.