Amerock Kamari Series 7-9/16 in (192 mm) Center to Center Satin Nickel Pull, -BP36825G10

Amerock Kamari Cabinet Pull For Clean Lines

Amerock Kamari cabinet pull uses a 7-9/16 in (192 mm) center-to-center layout, which spaces mounting points for standard cabinet boring so runs of doors and drawers stay visually aligned across a bank. The pull measures 8-3/4 in overall length, giving a little over 5/8 in of metal beyond each screw hole for a balanced look on wider fronts. A 1 in projection sets the grip off the face enough for fingers to catch the pull without feeling bulky on shallower doors. The 1-3/16 in width spreads contact across the hand, which helps when opening heavier drawers. Satin Nickel finish keeps reflections subdued, supporting consistent appearance under varied shop or site lighting. The pull is made from zinc, which provides a solid metal body ready for decorative cabinet and furniture applications.

Key Kamari Pull Details That Support Workflow

• The 7-9/16 in (192 mm) center-to-center dimension matches the Kamari specification, so drilling jigs can be set once and repeated across a project without layout changes, saving time on multi-cabinet runs.
• An overall length of 8-3/4 in ties the pull visually to wider drawers, helping hardware scale with face size for more consistent proportion on kitchen or bath layouts.
• The 1 in projection holds the grip off the surface enough for comfortable hand clearance while keeping the pull close to the door, which supports tight spaces such as galley lines or utility rooms.
• A 1-3/16 in width gives a broader gripping surface, which can feel more secure when pulling deeper drawers that see frequent use in shops, offices, or residential kitchens.
• Zinc construction provides a metal base suited to decorative hardware duties, so this pull can serve on everyday cabinets where a metal feel and appearance are desired.
• Satin Nickel finish delivers a soft sheen across the zinc body, supporting a neutral, modern look that coordinates with other satin nickel decorative hardware in the same space.

Mounting Dimensions For Consistent Alignment

The 7-9/16 in (192 mm) center-to-center measurement defines the screw spread, so drill patterns can be matched to this exact spacing on doors and drawer fronts. Base dimensions of 3/8 in long by 3/8 in wide concentrate mounting at compact feet, which helps the pull sit neatly without covering large areas of the panel face. With a 1 in projection and 1-3/16 in width, the mounted profile stays low yet functional, keeping hardware from dominating narrow stile and rail designs while still offering a usable handhold.

Using This Kamari Pull On Cabinet Projects

Where The Amerock Kamari Cabinet Pull Fits Best

This Amerock Kamari Series pull is part of the Kamari collection, aligning its 7-9/16 in (192 mm) center-to-center layout and overall 8-3/4 in length with that family look for coordinated cabinet runs. The satin nickel finish pairs with other satin nickel decorative hardware and moldings, giving designers and installers a clear option when building a unified hardware schedule. With its 1 in projection and 1-3/16 in width, the pull works on cabinet doors and drawers where a modest stand-off is needed without projecting far into walkways, such as kitchens, baths, or office casework. Zinc material positions this pull as a metal solution suitable for day-to-day cabinet use where a metal grip and satin nickel appearance are desired on both framed and frameless casework layouts.

Why These Kamari Dimensions Support Repeatable Results

The 7-9/16 in (192 mm) center-to-center spacing lets installers lock cabinet boring jigs to that dimension, which keeps hole placement consistent across multiple doors and drawers in a run. The 8-3/4 in overall length offers enough bar length outside the mounting points so the pull visually anchors larger drawer fronts without overwhelming narrower units. A 1 in projection sets the handgrip off the face at a predictable distance, which helps align adjacent cabinets so pulls do not interfere with each other when doors swing or drawers slide. The 1-3/16 in width supplies a stable gripping area centered over the mounting screws, helping pull force transfer directly into the cabinet front. Base dimensions of 3/8 in by 3/8 in focus contact at two compact pads, which supports a clean footprint on painted, stained, or laminated faces where a smaller mounting area is preferred.

Common Questions About Kamari Satin Nickel Pulls

Select This Pull For 192 mm Layout Projects

The Amerock Kamari cabinet pull with 7-9/16 in (192 mm) center-to-center spacing, 8-3/4 in overall length, and 1 in projection offers a defined layout for cabinet doors and drawers. Satin nickel finish on a zinc body aligns with projects calling for this specific look and dimension set. For cabinet runs planned around a 192 mm drilling pattern and a satin nickel Kamari aesthetic, this pull provides the matching size and appearance needed to keep hardware consistent across the job.