Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari 192mm pull is a zinc cabinet and drawer pull designed for projects that call for a 7-9/16 in center-to-center layout, so it lines up with that specific hole spacing on doors and drawers. The golden champagne finish provides a warm metallic look that coordinates with other golden champagne decorative hardware in a space. The pull length of 8-3/4 in gives hand clearance along the drawer or door edge, which helps on wider fronts. Its 1 in projection sets the grip away from the surface, giving fingers room to grab without scraping the cabinet face. A 1-3/16 in width spreads the pull visually across the front, tying into the overall cabinet design. The compact 3/8 in by 3/8 in base dimensions sit neatly on the mounting points, which helps when aligning the pull on narrow rails or stile faces.
The 7-9/16 in center-to-center measurement defines where the two mounting holes land, so it suits door and drawer fronts already drilled or planned for that spacing. The 3/8 in by 3/8 in base dimensions give a compact footprint at each mounting point, which helps position the pull on narrow rails without overhanging edges. The 1 in projection controls how far the pull stands off the surface, which affects how the hand approaches and grips the pull on doors and drawers. With an overall length of 8-3/4 in, the pull spans more of the front, which can aid alignment with surrounding fronts in a bank of cabinets.
The Kamari pull with a 7-9/16 in (192 mm) center-to-center dimension works on cabinet and drawer fronts drilled to that metric or imperial spacing, so it can serve both new layouts and straightforward changeouts where that hole pattern is present. Its 8-3/4 in length gives a substantial bar to grab, which is helpful on taller doors, pantry fronts, or wide drawers that benefit from a longer pull point. The 1 in projection sets the grip off the face, so hands clear decorative door profiles or applied moldings that might sit close to the hardware line. With a width of 1-3/16 in, the pull presents a defined strip of metal against painted or stained wood, adding a visible hardware line that can be repeated across runs of cabinetry.
The golden champagne finish on this Amerock Kamari pull delivers a specific warm tone, which matters when tying the pull into matching golden champagne decorative hardware in the same room. The zinc construction provides a metal body for the pull, which supports a solid feel as drawers and doors are operated through daily use. The 3/8 in by 3/8 in base dimensions give predictable bearing surfaces at each mounting point, which helps when laying out drilling jigs or spacing pulls evenly across multiple fronts. By combining a fixed 7-9/16 in center-to-center with the 8-3/4 in overall length, the pull offers a repeatable proportion that can be carried from small doors to larger drawer fronts, helping maintain a consistent visual rhythm in a kitchen, bath, or built-in project.
The Amerock Kamari BP36825BBZ has a 7-9/16 in (192 mm) center-to-center measurement, which matches layouts drilled for that spacing on cabinet doors or drawers.
The Kamari 7-9/16 in cabinet pull has an overall length of 8-3/4 in, so it provides an extended gripping area across the cabinet or drawer front.
This golden champagne cabinet pull projects 1 in from the mounting surface, giving finger clearance for comfortable operation on doors and drawers.
The Amerock Kamari 192mm pull is made from zinc, providing a metal construction that supports a solid feel in regular cabinet use.
The Amerock BP36825BBZ pull has base dimensions of 3/8 in by 3/8 in at each mounting point, which helps it sit neatly on rails and stiles.
The Amerock Kamari zinc handle has a golden champagne finish, which provides a warm metallic tone that coordinates with other golden champagne hardware.
The Amerock Kamari 192mm pull with a 7-9/16 in center-to-center layout, 8-3/4 in overall length, and 1 in projection offers defined dimensions for cabinet and drawer fronts. The zinc construction and golden champagne finish supply a specific material and color choice. With these fixed measurements and finish, this pull can be specified across a full run of doors and drawers where that center-to-center pattern and visual look are desired, supporting consistent hardware results on professional installations and serious DIY cabinet projects.