Amerock Kamari matte black pull is a zinc cabinet handle designed to give a consistent 7-9/16 inch center-to-center grab across multiple doors and drawers, which helps installers line up drilling patterns and keep a clean sightline on finished runs. The pull uses a 192 mm center-to-center dimension, so metric layouts on shop drawings convert directly for repeatable hole spacing on larger projects. Its 8-3/4 inch overall length creates a longer handhold than the boring pattern alone, which helps users get a comfortable grip on wider or taller fronts. A 1 inch projection sets the handle off the face of the door or drawer, giving enough finger clearance while keeping the pull close to the surface for a tight, modern look on cabinetry. The 1-3/16 inch width provides a solid front profile that reads as substantial on residential or commercial casework.
The Amerock BP36825MB pull uses a 7-9/16 inch center-to-center mounting pattern, so installers can lay out holes with that fixed spacing across all doors and drawers on a job. Its 192 mm center-to-center metric dimension pairs with the same mounting layout, giving flexibility whether plans are in imperial or metric while keeping the boring pattern identical. The pull projects 1 inch off the surface, which defines how far the grip sits from the door or drawer and influences finger room during operation. With a 3/8 inch by 3/8 inch base at each mounting point, the hardware seats onto a compact footprint, which supports use on narrower stiles without overhanging edges. The zinc material construction supports consistent threading at the 8-32 size, so the pull fastens securely into the prepared holes.
The Kamari pull with 192 mm center-to-center spacing works well anywhere a longer cabinet handle is needed to span wider drawer faces or tall doors, because the 7-9/16 inch boring pattern stretches the grip across more of the front. Its 8-3/4 inch overall length helps keep the handle visually balanced on medium and large cabinet faces, so runs of base cabinets or tall pantry units carry a consistent handle size. The 1-3/16 inch width adds visual weight along the front of the cabinet, giving the handle presence on decorative hardware and moldings layouts where the pull is part of the design line. A 1 inch projection keeps the handle relatively close to the cabinet face while still allowing fingers behind the pull, which is helpful on tighter aisle spaces where extra extension into the room is unwanted. The matte black finish provides a dark, uniform surface, which can tie together other black hardware on surrounding casework and fixtures.
The defined 7-9/16 inch center-to-center measurement lets installers set up jigs or templates one time, then repeat that 192 mm boring pattern across an entire job, reducing layout variation between pieces. With an 8-3/4 inch overall length, the Amerock Kamari cabinet pull allows consistent overhang beyond the screw holes on each side, which helps keep handle ends aligned relative to door and drawer edges. The 3/8 inch by 3/8 inch base dimensions at each mounting point give a predictable contact area against the cabinet surface, which supports tight seating when hardware is drawn down against the wood. The 1 inch projection defines how far the pull stands off the front, so finished installations have a uniform stand-off from cabinet to cabinet. Zinc construction in the Amerock BP36825MB pull provides a stable body for the threaded 8-32 mounting interface, supporting repeatable fastening and torque during the final hardware stage.
The Amerock Kamari cabinet pull has a 7-9/16 inch center-to-center spacing, also described as 192 mm, which sets the drilling distance between mounting holes.
The Amerock BP36825MB Kamari pull has an 8-3/4 inch overall length, so the handle extends beyond the mounting holes to span a wider area on the door or drawer.
The Kamari matte black cabinet pull has a 1 inch projection, setting how far the grip stands off the cabinet face for finger clearance.
The Amerock Kamari cabinet pull is made from zinc, giving a solid metal body for the handle and its threaded mounting points.
Each base on the Kamari pull measures 3/8 inch by 3/8 inch, defining the footprint where the pull contacts the cabinet surface.
The Amerock Kamari matte black pull uses 8-32 x 1 inch screws, matching the threaded mounting interface in the zinc handle.
The Amerock Kamari matte black pull BP36825MB combines a 7-9/16 inch (192 mm) center-to-center layout with an 8-3/4 inch overall length, giving a clear pattern for drilling and a proportion suited to wider cabinet fronts. Its 1 inch projection and 1-3/16 inch width define how the handle feels in the hand and how far it stands off the door or drawer. With zinc construction and 3/8 inch by 3/8 inch bases, the pull presents a compact, solid contact area on the cabinet surface. For projects calling for a matte black finish and this specific center-to-center pattern, order the Amerock BP36825MB from Wurth Baer Supply to match your cabinet hardware run.