Amerock Kamari pull 192mm center to center gives cabinet doors and drawers a consistent 7-9/16 in mounting span, which keeps layout straightforward on multi-door runs. The 8-3/4 in overall length provides enough grip area for everyday use without crowding adjacent fronts. Its 1 in projection sets the handle off the face of the cabinet, allowing fingers to wrap the pull comfortably while keeping the profile tight to the door. The 1-3/16 in width gives the pull a defined edge, which helps hands find it quickly in busy shop or kitchen environments. A base size of 3/8 in by 3/8 in at each foot keeps the contact points compact, which helps when lining up pulls on narrow rails. The zinc material provides a solid-feeling handle body, and the gunmetal finish delivers a dark, modern look that coordinates with many cabinet finishes.
The 7-9/16 in center-to-center layout of the Amerock BP36825GM pull lets installers work from a fixed drilling pattern, which speeds batch work on multiple cabinet fronts. Because the overall length is 8-3/4 in, the ends of the pull extend slightly beyond the mounting holes, giving a balanced appearance on wider drawers. The 1 in projection keeps the pull from standing too proud, which is useful on walk-through cabinet runs where clearance between opposing doors is tight. With a 1-3/16 in width, the pull presents a broad front edge, so users can hook fingers from above or below. The compact 3/8 in by 3/8 in bases meet the cabinet surface at small contact points, which helps when aligning the pull visually to door edges, rails, or panel reveals.
The Kamari Series 7-9/16 in center to center gunmetal pull suits cabinet layouts that call for a consistent 192 mm hole spacing, which is common on contemporary kitchen and bath runs. The 8-3/4 in overall length makes the pull appropriate for both standard-width drawers and taller doors, providing one size that can serve across a full room of cabinetry. Its 1 in projection keeps hardware within a low profile zone, which benefits galley layouts where cabinets sit close to each other. The 1-3/16 in width offers a comfortable front surface that supports repeated opening cycles on storage cabinets in workrooms or shops. Because the pull is made of zinc with a gunmetal finish, it supports decorative hardware schemes that favor darker, muted tones across multiple cabinet banks.
The defined 7-9/16 in (192 mm) center-to-center measurement on this Amerock Kamari gunmetal pull allows installers to set up drilling jigs once and repeat that pattern, which helps keep handle alignment straight from cabinet to cabinet. The 3/8 in by 3/8 in base dimensions reduce the visual footprint at each mounting point, which helps the pull sit cleanly on narrow frame members without overlapping profile details. With a 1 in projection, the pull stands off just enough to clear fingers from the cabinet face, which reduces wear on door finishes at daily touch points. The 1-3/16 in width presents a stable gripping bar, which maintains the same hand feel whether the pull is oriented vertically on doors or horizontally on drawers. The combination of zinc material and gunmetal finish delivers a unified surface, which supports a consistent appearance when multiple pulls are installed across a project.
The Amerock Kamari Series cabinet pull has a 7-9/16 in (192 mm) center-to-center measurement, which sets the exact drilling span for mounting on doors and drawers.
The Amerock BP36825GM pull has an overall length of 8-3/4 in, which defines how much of the drawer or door front the handle visually covers.
This gunmetal zinc cabinet pull projects 1 in from the cabinet surface, providing finger clearance while keeping a relatively low profile.
The Kamari Series cabinet pull has a width of 1-3/16 in, creating a broad gripping area for doors and drawers.
Each base on this Amerock Kamari pull measures 3/8 in long by 3/8 in wide, providing compact contact points on the cabinet front.
This Amerock decorative cabinet hardware pull is made from zinc with a gunmetal finish, giving a solid feel and a dark, modern appearance.
The Amerock Kamari Series 7-9/16 in center to center gunmetal pull combines a defined 192 mm mounting span with an 8-3/4 in overall length, which suits both doors and drawers in one hardware choice. Its 1 in projection and 1-3/16 in width provide a usable gripping surface that stays within a compact profile on cabinet faces. With zinc construction and a gunmetal finish, the pull aligns with decorative hardware projects that call for darker tones. For cabinet work that benefits from consistent drilling patterns and a unified look, this Amerock BP36825GM pull offers a measured, dimensioned option ready for layout.