Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari 10-1/16 in pull is a zinc cabinet pull in the Kamari collection with a satin nickel finish, so it delivers a consistent look for lined-up doors and drawers while using a sturdy material that suits everyday cabinet use. The 10-1/16 in (256 mm) center-to-center drilling sets the handle-hole spacing, which lets installers match this pull to layouts designed around that common metric and imperial size. The zinc material forms the body of the pull, which provides a solid-feeling grip area across the 11-1/4 in overall length and helps maintain shape at normal cabinet loads. The satin nickel finish coats the pull surface, so the visible faces present a uniform color tone that coordinates with other satin nickel decorative hardware on the same project. The Kamari collection identity ties this part to the broader Amerock line, which supports consistent styling when multiple pulls are specified together.
The 10-1/16 in center-to-center drilling on this Amerock BP36826G10 cabinet pull anchors the mounting pattern, so shop drawings and jigs can use that single measurement to repeat hole placement across a run. The 8-32 x 1 in screw size specification defines the thread and nominal length that engage the pull, which gives installers a clear match to standard cabinet drilling for typical door and drawer front thicknesses. The 1 in projection keeps the working grip zone out from the face, so fingers clear the door or drawer surface while still staying close enough to avoid snagging on nearby traffic paths. The 3/8 in by 3/8 in base dimensions keep each foot compact, so the pull seats cleanly on narrow rails yet still has enough bearing area to distribute normal opening forces on the cabinet material.
The Amerock Kamari 10-1/16 in pull works as a matched handle for cabinet fronts that are drilled on a 256 mm, or 10-1/16 in, center-to-center pattern, so it suits layouts that follow this longer European-style spacing. The satin nickel finish on the zinc body lends itself to projects built around satin nickel decorative hardware, which helps installers keep door pulls, drawer pulls, and other visible hardware in one coordinated finish family. With an overall length of 11-1/4 in, this pull spans a wide section of the face, so it pairs well with wider drawers or taller doors where a longer handle looks proportionate to the front. The 1-3/16 in width of the grip section gives a substantial bar area, which can be useful on heavier cabinet fronts where a fuller hand contact area supports controlled opening and closing.
The 10-1/16 in center-to-center dimension on this Kamari 256mm center to center pull lets production shops standardize on a single drilling setting, which cuts down on layout variation from cabinet to cabinet. The 1 in projection is controlled tightly enough that banks of doors and drawers present a consistent pull stand-off, which helps lines stay straight when viewed down a row of cabinets. The defined 3/8 in by 3/8 in base dimensions at each mounting point give a clear footprint, which helps when aligning pulls to existing edges, reveal lines, or decorative trim intersections. The zinc material construction works together with the bar width to create a stable handle body, which is important when multiple users grip the same pull many times each day on busy kitchen or shop cabinets.
The Amerock Kamari 10-1/16 in pull uses a 10-1/16 in (256 mm) center-to-center dimension, which sets the mounting hole spacing for cabinet doors and drawers using this handle.
The BP36826G10 pull has an 11-1/4 in length, so it spans a substantial portion of the face and works well on wider drawers or doors needing a longer handle.
This satin nickel zinc cabinet pull has a 1 in projection, providing consistent finger clearance behind the bar while keeping the handle close to the cabinet front.
The Amerock Kamari series pull is made from zinc, giving the handle a solid-feeling body appropriate for regular cabinet door and drawer operation.
This Kamari pull has a satin nickel finish, so it visually coordinates with other satin nickel decorative hardware specified on the same project.
Each mounting base on this pull measures 3/8 in by 3/8 in, helping define the contact area on the cabinet face for clean, repeatable alignment.
The Amerock BP36826G10 cabinet pull from the Kamari collection combines a 10-1/16 in (256 mm) center-to-center pattern, zinc construction, and a satin nickel finish, so it lines up with metric-based drilling while matching satin nickel projects. The 11-1/4 in overall length, 1 in projection, and 1-3/16 in width define how it sits and feels on the cabinet face, which supports predictable results across door and drawer runs. For projects built around this drilling pattern and finish, this Kamari satin nickel pull offers a defined set of dimensions ready for layout and installation.