Amerock Kamari 10-1/16 in pull is a zinc cabinet handle in the Kamari collection, so it gives a consistent look across doors and drawers on the same run. The golden champagne finish provides a warm metallic tone, helping the pull coordinate with contemporary and transitional fronts. The 10-1/16 in (256 mm) center-to-center hole spacing matches common drill patterns, which supports straightforward layout on cabinet doors and drawer fronts. The overall 11-1/4 in length offers a generous gripping area, which helps users open heavier drawers or tall pantry doors comfortably. A 1 in projection sets the handle off the face enough for fingers to wrap behind, aiding everyday operation. The 1-3/16 in width creates a solid-feeling face for the hand to contact, which can improve control when pulling wider or loaded drawers.
The 10-1/16 in center-to-center measurement on the Amerock Kamari pull sets the exact distance between mounting holes, which supports precise drilling or alignment on cabinet faces. The matching 256 mm metric reference helps when using metric layout tools or European drilling patterns. The 11-1/4 in overall length means the pull extends slightly beyond the hole spread at each end, affecting where it sits relative to panel edges and rails. A 1 in projection defines how far the handle stands off from the cabinet surface, which influences both ergonomics and how it clears door profiles or trim. The 3/8 in by 3/8 in base size at each post limits the visible footprint on the cabinet, which matters when covering existing marks or fitting within narrow frame members.
The Amerock Kamari series 10-1/16 in (256 mm) center-to-center pull works as a handle option for cabinets and drawers that are drilled on a 10-1/16 in pattern, tying into common long-pull layouts on kitchens and built-ins. The golden champagne finish allows the pull to coordinate with other warm metallic elements, so it can be specified alongside similar-toned hinges, faucets, or lighting. At 11-1/4 in overall length, the pull lends itself to wider drawers, appliance fronts, and tall doors, helping maintain visual balance on large faces. The zinc construction suits interior cabinet environments where a metal pull is standard, fitting typical kitchen, bath, office, or shop cabinetry. Because the base dimensions are 3/8 in by 3/8 in, the pull seats neatly on face-frame rails or slab fronts without overwhelming narrow stiles.
The defined 10-1/16 in center-to-center spacing on the Amerock BP36826BBZ pull allows installers to repeat the same drilling template across multiple fronts, which helps keep lines straight on long cabinet runs. The stated 256 mm metric size means layouts planned in metric transfer cleanly, avoiding conversion errors between inch and millimeter systems. With a 1 in projection, the handle provides predictable clearance from the door or drawer face, supporting hand access while maintaining a low enough profile for tight walkways. The 1-3/16 in width gives a measurable gripping surface, aiding users when opening heavy drawers or storage areas. The golden champagne finish is identified specifically, so designers can specify this pull alongside other Amerock decorative hardware in the same tone, helping spaces look coordinated from cabinet to cabinet.
The Amerock Kamari BP36826BBZ pull has a 10-1/16 in (256 mm) center-to-center, which sets the mounting hole spacing for cabinet doors and drawers.
The Amerock BP36826BBZ Kamari pull has an overall length of 11-1/4 in, so it spans a wider area on larger doors and drawers.
This golden champagne cabinet pull has a 1 in projection, providing space for fingers to wrap behind the handle during everyday use.
The Kamari 256mm center to center pull is made from zinc, giving it a metal construction suited to regular cabinet operation.
The Amerock Kamari cabinet handle has base dimensions of 3/8 in by 3/8 in at each mounting point, defining the contact area on the cabinet surface.
The Amerock Kamari series cabinet pull has a golden champagne finish, giving it a specific warm metallic appearance for coordinated projects.
The Amerock Kamari BP36826BBZ cabinet pull combines a 10-1/16 in (256 mm) center-to-center size, 11-1/4 in overall length, and golden champagne finish to support coordinated cabinet runs. The zinc construction, 1 in projection, and 1-3/16 in width define how it feels and functions on doors and drawers. For cabinet projects built around this hole spacing and finish, this Kamari pull from Wurth Baer Supply offers a clearly defined option.