Amerock Kamari Series 10-1/16 in (256 mm) Center to Center Gunmetal Pull, -BP36826GM

Amerock Kamari Pull 256mm For Cabinet Projects

Amerock Kamari pull 256mm describes a cabinet handle from Amerock Corporation that uses a 10-1/16 in (256 mm) center-to-center hole spacing, so it fits layouts drilled to this common spread on doors and drawers. The pull is part of the Kamari collection, so it keeps styling consistent wherever that collection is already used across a room or job. The gunmetal finish defines the surface appearance, giving a specific color choice that can be repeated across multiple cabinets for a coordinated hardware look. The pull uses zinc as the material, which provides a solid metal body for everyday cabinet use. An overall length of 11-1/4 in establishes how much linear handle real estate is available across a face, important when lining up with rail widths. A projection of 1 in sets how far it stands off the surface, which affects hand clearance and operation.

Key Kamari Gunmetal Pull Details For Jobs

• The 10-1/16 in (256 mm) center-to-center dimension sets the mounting hole spacing, which helps when matching existing cabinet drilling patterns on replacement or new installations.
• The 11-1/4 in overall length defines the visual span of the Amerock Kamari pull, which matters when aligning multiple pulls across wide banks of drawers or tall cabinet doors.
• The 1 in projection from the surface establishes how far the handle stands off the cabinet, which affects finger clearance and how the pull feels when operating doors or drawers.
• The 1-3/16 in width specifies the front face size of the pull, giving a predictable profile that can be coordinated with other decorative hardware on the same project.
• The 3/8 in by 3/8 in base dimensions describe the footprint at each mounting point, which influences how the pull seats on the cabinet face and covers the drilled holes.
• The 8-32 x 1 in screw size defines the threaded interface used with this handle, which matters when matching to standard cabinet door and drawer front thicknesses.

Amerock Kamari Pull 256mm Fit And Layout Details

The Amerock Kamari pull with a 10-1/16 in (256 mm) center-to-center spacing is designed around a specific distance between mounting holes, so it aligns with layouts drilled to that measurement on cabinet faces. The 3/8 in by 3/8 in base dimensions at each end give a compact footprint at the contact points, which influences how the pull sits flat on the surface. With an overall length of 11-1/4 in, this Kamari pull extends past the mounting points, which affects how it lines up visually with rail widths, stile spacing, or drawer proportions. The 1 in projection defines the stand-off distance from the door or drawer, which is a key dimension when planning finger access and operating comfort in tight spaces or near adjacent fronts.

Where This Amerock Kamari Pull Works Best

Cabinet And Drawer Use With 10-1/16 Spacing

This Kamari series pull is categorized as a handle and pull within decorative hardware, so it is intended for cabinet doors and drawers where a graspable fixture is needed. The 10-1/16 in (256 mm) center-to-center measurement targets installations that are drilled for that exact spacing, so it serves work where that hole pattern is either being created or already exists. As part of the Kamari collection, the pull supports projects where a consistent line of Amerock cabinet hardware is used, tying together kitchen, bath, or casework fronts that share the same series. The pull length of 11-1/4 in offers a longer handle option, which suits broader drawer fronts or taller doors that benefit from a more substantial grip span across the face.

Dimensions And Finish That Support Consistency

The gunmetal finish on this Amerock Kamari pull establishes a specific color and surface look, so it supports projects built around that tone across hinges, knobs, and other handles from the same finish family. Construction in zinc gives the pull a metal body, which provides a uniform material foundation for the finish and a consistent feel when operated. A 1 in projection from the surface sets the working clearance, so that dimension can be repeated across multiple installations to keep hand access similar from cabinet to cabinet. The 1-3/16 in width defines the face profile, which helps when aligning visual proportions between this pull and other decorative hardware on the job. Base dimensions of 3/8 in by 3/8 in keep the mounting contact areas compact, which can be important when hardware placement is close to door edges or narrow frame members.

Common Questions About The Kamari 10-1/16 Pull

Selecting This Kamari Pull For Cabinet Runs

The Amerock Kamari series 10-1/16 in (256 mm) center-to-center gunmetal pull brings a defined combination of size, material, and finish to cabinet work, so it fits projects built around those exact dimensions. The 11-1/4 in overall length, 1 in projection, and 1-3/16 in width establish how this handle will look and feel across doors and drawers. With zinc construction and a gunmetal finish, the pull aligns with decorative hardware layouts that call for that appearance from Wurth Baer Supply catalog offerings.