Amerock Kamari Series 10-1/16 in (256 mm) Center to Center Polished Nickel Pull, -BP36826PN

Amerock Kamari 10-1/16 In Pull For Cabinets

Amerock Kamari 10-1/16 in pull uses a 10-1/16 in center-to-center hole spacing, so it lines up with standard drill patterns on many cabinet doors and drawers, reducing layout time on new installs or swaps. The pull length of 11-1/4 in gives a comfortable gripping area along the face, which helps when opening wider or heavier fronts. A projection of 1 in sets the handle off the surface enough for fingers to wrap behind it, improving everyday use without sticking out excessively on tight runs. The 1-3/16 in width provides a stable handhold, which supports consistent feel across multiple fronts in a bank of cabinets. Base dimensions of 3/8 in long by 3/8 in wide keep the contact point compact, which can help the handle sit neatly on narrow stile faces or modern, minimal fronts. This pull is part of the Kamari collection, keeping the visual design coordinated on projects using matching pieces.

Key Kamari Series Pull Details For Jobs

• The center-to-center dimension of 10-1/16 in (256 mm) allows installers to match an existing two-hole pattern or set a repeatable spacing on new cases, which speeds up drilling jigs and keeps hardware aligned across a run.
• The overall length of 11-1/4 in creates a longer grip point on the door or drawer, which is useful on tall pantry doors or wide drawers where users typically grab toward the ends instead of the middle.
• The 1 in projection sets the pull off the surface at a practical distance, helping fingers clear the door edge while limiting how far the handle extends into walkways or tight galley layouts.
• The 1-3/16 in width provides a broader face for the hand, which supports a solid feel when opening loaded drawers or larger cabinet fronts in day-to-day use.
• Base dimensions of 3/8 in by 3/8 in concentrate contact at each mounting point, which helps the pull sit cleanly on narrower rails where larger foot prints could crowd panel details.
• The polished nickel finish gives a bright metallic appearance, which can coordinate with other polished nickel hardware on the same project for a consistent look.

Cabinet Pull Sizing And Mount Layout Details

The 10-1/16 in center-to-center measurement sets the mounting hole spacing, so installers can drill or reuse holes with confidence when laying out casework. At 11-1/4 in overall length, this pull stretches slightly beyond the hole spread, which leaves visible metal past each screw point for a balanced proportion on mid-size and wider fronts. The 1 in projection keeps the working distance off the cabinet face predictable on every door and drawer in the run, which helps maintain straight sightlines when viewed from the side. With a 1-3/16 in width, the handle offers enough front surface for a full handgrip while still suiting slimmer, modern profiles. Compact 3/8 in by 3/8 in bases define the footprint at each mounting point, which helps the pull seat neatly over the bore points without covering too much surrounding material.

Using The Kamari Pull In Cabinet Projects

Where This Amerock Kamari Cabinet Pull Fits

This Amerock Kamari Series pull belongs to the Decorative Hardware & Moldings category under Handles and Pulls, so it suits cabinet and furniture applications needing a handle-style pull. The 10-1/16 in (256 mm) center-to-center size positions it in the longer cabinet pull range, which works well on wider drawers, pantry doors, and tall cabinet fronts where additional grip length is useful. Being part of the Kamari collection gives it a defined design family, which matters when coordinating handles across kitchens, baths, or built-ins that share the same style language. Its polished nickel finish provides a bright metal look, which can match other polished nickel components on the same job, helping hardware stay visually consistent from door to door. The combination of length, projection, and width allows this pull to bridge medium and large fronts, giving installers one part number that can cover multiple positions in a project.

Details That Support Consistent, Repeatable Results

The precise 10-1/16 in center-to-center dimension allows jigs or templates to be set to a known spacing, which helps installers repeat hole placement quickly across many cabinets without repeated measuring. The 11-1/4 in overall length defines where the ends of the pull will land relative to the holes, which helps plan clearances near adjacent doors, appliance panels, or wall returns. A 1 in projection standardizes stand-off from the face, aiding in achieving an even shadow line when all pulls in a space share the same spec. The 1-3/16 in width gives enough front area to read consistently in elevation drawings and finished views, which is useful when aligning hardware design with other trim elements. Base dimensions of 3/8 in by 3/8 in provide a clear footprint at each fastener point, helping the pull seat cleanly over the bore and making it easier to align the hardware visually with rails, stiles, or edge reveals.

Common Questions About Amerock BP36826PN Kamari Pull

Selecting This Kamari Pull For Your Project

The Amerock Kamari Series BP36826PN pull combines a 10-1/16 in (256 mm) center-to-center layout with an 11-1/4 in overall length, giving installers a clear spec for planning cabinet fronts. With its 1 in projection, 1-3/16 in width, and compact 3/8 in by 3/8 in bases, the pull offers predictable proportions across doors and drawers. The polished nickel finish and zinc construction identify it as a metal handle suited to decorative cabinet work. Use this part number wherever a coordinated, longer Kamari pull is needed across a run of casework.