Berenson Brookridge Series 3-3/4" (96 mm) Center to Center Verona Bronze Pull, - 2617-10VB-P
Description
Brookridge Pull 96mm Verona Bronze For Cabinets
Brookridge pull 96mm Verona bronze identifies this Berenson Brookridge Series cabinet pull as a 96 mm center to center handle in a Verona Bronze finish, so installers get a specific pull that matches hole spacing and finish on existing cabinet runs. The 3-3/4 inch center to center dimension matches standard 96 mm drilling, which simplifies layout when drilling new fronts or swapping from similar hardware. The Transitional style gives this pull a look that works between traditional and contemporary cabinet door profiles, which is useful when updating mixed spaces. Its zinc material provides a solid metal construction that handles regular door and drawer use in kitchens, baths, or shop cabinets. The 4-3/16 inch overall length keeps the pull compact while still readable on a face frame or frameless front, helping maintain consistent sight lines across a bank of fronts during installation.
Key Brookridge Pull Details That Help On Site
- The 96 mm center to center measurement aligns with common factory boring patterns, which lets installers reuse existing holes on many cabinet fronts and reduce layout steps during hardware changeovers.
- The 4-3/16 inch length or diameter dimension defines the overall footprint of the pull, so installers can predict clearance near adjacent doors or trim and maintain even spacing along drawer faces.
- The 1-1/4 inch projection sets how far the pull stands off the door or drawer, which creates finger clearance while keeping the handle tight enough to avoid catching on clothing in busy work areas.
- The 15/32 inch width gives the grip a slim profile, which helps this pull fit narrow rails or smaller drawer fronts while still presenting a defined line for visual alignment across the cabinet run.
- The 1/2 inch base size shows how much area each post covers, which matters when covering previous screw head impressions or finish marks around old hardware during replacement work.
- The Verona Bronze finish provides a dark, warm tone on the zinc pull body, which lets installers coordinate with other bronze decorative hardware and moldings in the same project.
Mounting And Fit Details For This 96 Mm Pull
The center to center distance of 96 mm on this Berenson Brookridge pull matches a widely used metric drilling standard, which helps it slot into pre-bored cabinet doors and drawers without re-drilling. The 8-32 screw size specification indicates the threaded interface in the pull, which allows matching with standard cabinet handle screw stock when adjusting for varying door or drawer thicknesses. A 1-1/4 inch projection keeps the working grip away from the cabinet surface, which helps fingers clear the door edge while still keeping hardware close for a compact look. The 4-3/16 inch overall length keeps this pull proportioned for mid-size drawers and doors, which helps maintain balance on typical base and wall cabinets.
Using The Berenson Brookridge Pull In Real Projects
Where This Brookridge Series Cabinet Pull Fits
This Berenson Brookridge Series pull, identified as 2617-10VB-P, belongs in decorative hardware and moldings under handles and pulls, which places it directly in the cabinet and furniture hardware set installers work with daily. The Transitional style lets this pull sit comfortably on raised panel, flat panel, or slab doors, which supports mixed-kitchen layouts where some cabinets are newer than others. The Verona Bronze finish coordinates visually with other Verona Bronze pieces, which simplifies finish matching across hinges, knobs, and additional pulls in the same area. Being part of the Berenson product class for handles and pulls helps tie it into standard decorative hardware lines many shops already specify.
The zinc material provides a metal body for the pull, which supports repeated grabbing on cabinet doors and drawers in everyday residential or light commercial use. A 15/32 inch width and 1/2 inch base work together to give the pull a defined, yet compact, footprint, which is useful on narrower rails or smaller vanity fronts where oversized hardware would dominate the face. The 96 mm center to center layout also pairs well with other 96 mm hardware in a space, which keeps boring patterns consistent across replacement and new-install cabinets. Each of these details helps streamline hardware scheduling and layout on cabinet packages that call for a Transitional Verona Bronze look.
Why These Dimensions Support Repeatable Hardware Layout
The 96 mm center to center spacing on this Brookridge pull establishes a fixed drilling pattern that can be repeated across runs of doors and drawers, which helps maintain straight hardware lines on long cabinet walls. The 4-3/16 inch overall length gives installers a predictable end-to-end size, which simplifies setting reveals from door edges or between double doors. A 1-1/4 inch projection creates a consistent stand-off from the surface, which helps align hardware depth with other handles in the same kitchen or bath line. The 1/2 inch base size provides a known coverage area around each fastener point, which can help visually clean up minor finish variations left from older pulls after swap-outs.
The 15/32 inch width contributes to a comfortable gripping surface without appearing bulky, which can matter on smaller uppers or vanity drawers where visual scale is tight. The Verona Bronze finish applied over the zinc body keeps the color tone consistent across multiple pulls, which supports uniform appearance when hardware is laid out in long sight lines or on large islands. The Transitional styling creates a profile that repeats cleanly from door to drawer, which makes hardware placement grids easier to design and transfer across similar cabinet fronts. Together, these measured details help installers produce repeatable, aligned hardware installations with a single pull spec.
Common Questions About This Verona Bronze Pull
What is the center to center size of this pull?
The Berenson Brookridge pull has a 96 mm center to center size, which aligns holes for standard 3-3/4 inch cabinet handle drilling during installation or replacement.
How long is the Berenson Brookridge cabinet pull overall?
The Brookridge pull measures 4-3/16 inches in overall length, which helps size it correctly for typical cabinet doors and mid-width drawer fronts.
What projection does this Verona Bronze pull have?
This Verona Bronze pull has a 1-1/4 inch projection, which provides finger clearance off the cabinet surface without sticking excessively into the room.
What material is the Brookridge series pull made from?
The Brookridge Series pull is made from zinc, which gives it a metal body suitable for regular cabinet door and drawer use.
What style category does this Berenson pull fall under?
This Berenson pull is classified as Transitional style, which lets it coordinate with both traditional and more contemporary cabinet designs.
What screw size works with this cabinet pull?
This cabinet pull is matched to 8-32 screw size, which fits the threaded holes in the pull for fastening through common cabinet door and drawer thicknesses.
Selecting This Brookridge Pull For Your Next Run
The Berenson Brookridge Series 2617-10VB-P pull brings a 96 mm center to center layout, Transitional styling, and Verona Bronze finish together in one zinc cabinet handle, which suits many cabinet lines. The defined 4-3/16 inch length, 1-1/4 inch projection, and 15/32 inch width give clear layout dimensions for repetitive drilling and alignment. For projects calling for Verona Bronze decorative hardware and moldings, this Brookridge pull provides a matched handle option for both new installations and replacements across doors and drawers.