Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Brookridge cabinet pull is a zinc handle from the Brookridge collection that provides a transitional style for cabinet doors and drawers, so it works when you need hardware that bridges traditional and modern projects. The modern brushed gold finish on this pull adds a warm metallic look, which supports design schemes that call for gold-tone accents instead of cooler chrome. Its 96 mm center to center dimension sets the mounting hole spacing, helping you line up new drilling or match layouts that follow this common metric size. The pull length of 4-3/16 inches defines the hand contact area, which affects how comfortably fingers wrap the handle during frequent use. A projection of 1-1/4 inches sets how far the pull stands off the cabinet face, helping fingers grab the pull without rubbing the door surface. The 15/32 inch width and 1/2 inch base size keep the footprint compact, supporting tighter layouts on smaller faces.
The 96 mm center to center measurement on this Berenson Brookridge pull dictates where mounting holes land, which guides drilling templates and jig setups for repeat installations. With a 4-3/16 inch overall length, the pull sits slightly wider than the mounting span, giving some visual overhang beyond the screw points for a finished look. The projection of 1-1/4 inches sets the standoff distance, which helps doors and drawers open without fingers contacting the cabinet face as often. Its 15/32 inch width keeps the grip slender, which can be helpful on narrow rails or smaller drawer fronts. A base width of 1/2 inch at each end sets the visible pad at the mounting points, which can help conceal minor surface blemishes immediately around the holes. The modern brushed gold finish identifies the surface treatment, supporting projects that call for brushed, rather than polished, gold-tone hardware across a room.
The Brookridge series designation identifies this pull as part of Berenson decorative hardware, which helps when coordinating knobs and other pulls from the same collection on a full kitchen or bath layout. Its transitional style means the profile and detailing sit between ornate traditional and sharp modern lines, supporting projects where cabinet doors have clean but not ultra-minimal faces. The 96 mm center to center spacing matches a common metric layout, which is useful on cabinets drilled to that standard and on new construction where you want a repeatable pattern using metric jigs. A 4-3/16 inch length suits many base and wall cabinet doors, giving a handle that feels substantial without overwhelming typical panel widths. The modern brushed gold finish works on cabinet colors that benefit from warm tone contrast, such as darker paints or woods, keeping visual focus on the hardware line without high-gloss glare.
The precise 96 mm center to center measurement on this Berenson 2619-1MDB-P pull is important for repeatability, because it locks in a consistent drilling pattern that can be reused across doors and drawers on a job. Using that fixed spacing with a 4-3/16 inch body length gives you predictable edge clearances, which helps when you are setting pulls at specific offsets from door edges or panel rails. The 1-1/4 inch projection defines how far the pull extends from the front, which affects how drawers pass adjacent obstacles and how easily users catch the pull in a single motion. With a width of 15/32 inch, the grip stays slim, which can help maintain clean sightlines on flat-panel fronts while still giving enough surface for a confident grasp. The 1/2 inch base measurement at each end clarifies the area that contacts the cabinet surface, which matters when laying out pulls to avoid raised profiles, panel edges, or decorative trim that sit close to the mounting points. The zinc material keeps the construction consistent with many other cabinet pulls in the Berenson catalog, which is useful when a project specifies matching material across different hardware styles in the same space.
The Berenson Brookridge cabinet pull has a 96 mm center to center spacing, which sets the distance between mounting holes for layout and drilling.
The Brookridge series cabinet pull has an overall length of 4-3/16 inches, which defines the visible size across the front of a cabinet door or drawer.
The Berenson 2619-1MDB-P pull has a modern brushed gold finish, providing a brushed gold-tone surface for matching similar cabinet hardware.
This modern brushed gold cabinet pull is made from zinc, so it aligns with projects that specify zinc decorative hardware components.
The Brookridge series pull has a projection of 1-1/4 inches, setting the stand-off distance from the cabinet face for finger clearance.
The Berenson Brookridge pull has a width of 15/32 inch and a base size of 1/2 inch, defining the grip thickness and contact area on the cabinet.
This modern brushed gold cabinet pull from the Berenson Brookridge series brings a transitional style that supports both traditional and contemporary cabinet designs. With zinc construction, a 4-3/16 inch length, and 96 mm center to center spacing, it fits projects that follow common metric drilling patterns. The 1-1/4 inch projection, 15/32 inch width, and 1/2 inch base measurement help you plan clearances and coverage on doors and drawers. Use these confirmed dimensions and finish details to match existing layouts or design consistent runs of hardware with the Brookridge look.
