Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Brookridge pull 128mm center to center describes a Berenson Brookridge Series cabinet pull designed with a 128 mm center to center mounting span, so it fits layouts drilled on that common metric spacing. The pull has an overall length of 5-7/16 inches, giving enough hand contact for typical cabinet and drawer fronts while still suiting standard door and drawer widths. Its transitional Brookridge style bridges traditional and contemporary looks, so it works in mixed-design shops where projects combine straight lines with softer profiles. The pull is finished in matte black, which tones down reflections and creates a defined contrast line against many door and drawer surfaces. This cabinet pull belongs to the Decorative Hardware & Moldings category under Handles and Pulls, so it serves as the primary touch point on casework. The product is identified as Berenson Corporation part number 2621-1055-P, helping match this pull across drawings and reorders.
This cabinet pull uses a 128 mm center to center spacing between fastener points, so the mounting holes line up on that fixed distance across the door or drawer front. The pull projects 1-1/4 inches from the mounting surface, so the working depth from the face allows fingers to reach behind the bar without contacting the cabinet. With a width of 15/32 inch and a 1/2 inch base, the pull presents a narrow bar with slightly larger end pads, so the visual weight stays light while the contact area at each mounting point is clearly defined. The 5-7/16 inch overall length positions the mounting points toward the ends of the pull body, so the load is spread across the cabinet face when a user pulls.
This Berenson Brookridge Series pull is part of the Handles and Pulls product class within Decorative Hardware & Moldings, so it is suited for use on cabinet doors and drawer fronts in woodworking projects. The 128 mm center to center dimension ties it directly to layouts drilled on that metric spacing, so it works on new casework built to that pattern or on projects where existing fronts already use a 128 mm boring. Its 5-7/16 inch overall length coordinates well with medium-size cabinet doors and typical kitchen or bath drawer widths, so it can be used across banks of fronts without abrupt size changes. The transitional Brookridge style supports use in designs that sit between traditional and modern, so the same pull can run across varied rooms where profiles shift slightly but still need a consistent handle family. The matte black finish on zinc gives the pull a neutral, dark surface, so it visually anchors against light-colored cabinets and also blends into darker fronts where a subtle grip is preferred.
The 128 mm center to center measurement on this cabinet pull defines the exact distance between mounting points, so shop jigs and boring equipment can be set to a known value for consistent alignment across multiple doors or drawers. Its 1-1/4 inch projection establishes a repeatable stand-off from the cabinet face, so rows of pulls visually line up in depth when viewed from the side. The 15/32 inch width keeps the bar section relatively slim, so multiple pulls mounted on stacked drawers do not visually crowd the panel faces. With a 1/2 inch base measurement at each end, the pull creates a consistent pad where it contacts the cabinet, so that detail reads as a repeated design element across an installation. The zinc material provides the structural body of the pull, so each unit maintains its form as a metal component within the Berenson Brookridge line. The product is identified as manufacturer part 2621-1055-P and described as BROOKRIDGE PULL 128MM CC MAT BLK, so drawings and cut lists can call out the same pull number for coordinated ordering and layout.
The Berenson Brookridge pull has a 128 mm center to center dimension, so drilling patterns need holes set at that spacing to mount the pull correctly on cabinet fronts.
The Brookridge pull has a 5-7/16 inch overall length, so it spans a useful portion of typical cabinet doors and drawer fronts while remaining proportional on medium-width fronts.
This cabinet pull has a 1-1/4 inch projection from the mounting surface, so fingers can reach behind the pull comfortably without contacting the door or drawer face.
The Brookridge pull is made of zinc with a matte black finish, so it offers a metal grip with a low-sheen dark appearance suited to decorative cabinet hardware.
The pull has a 15/32 inch width, so it presents a slim face on the cabinet front while still offering enough surface for a defined grip line.
This cabinet pull has a 1/2 inch base, so the contact point around each mounting area neatly covers the holes and forms a small visual pad.
The zinc Berenson Brookridge Series pull with 128 mm center to center spacing and matte black finish offers a defined set of dimensions that tie directly into cabinet layouts. By matching fronts drilled on a 128 mm pattern and using the 5-7/16 inch overall length, this pull maintains consistent visual lines across doors and drawers. Its transitional style and slim 15/32 inch width support use on a range of casework where a metal matte black handle is desired. For projects that call out Berenson part 2621-1055-P or the SAP description BROOKRIDGE PULL 128MM CC MAT BLK, this product provides that exact identification.
Sold In: 1 Each
