Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Brookridge 128mm pull identifies this handle as part of the Brookridge collection from Berenson Corporation, tying it into a coordinated decorative hardware family for projects where matching pulls across a room keeps the visual line consistent. The pull is described as a handle in the Handles and Pulls product class, so it serves as the working grip point on a cabinet door or drawer front in everyday use. A center to center dimension of 128 mm positions the mounting holes at a common metric spread, which supports layouts based on standard drilling patterns across multiple cabinet runs. Overall length of 5-7/16 inches provides enough hand contact area for a solid grasp, helping doors and drawers move smoothly without needing an oversized footprint on the face. A projection of 1-1/4 inches holds the hand away from the door surface, which helps fingers clear adjacent faces during operation. A width of 15/32 inch and base width of 1/2 inch define a slim profile at the mounting points, keeping the pull visually light while still covering a typical bore area on the cabinet front.
A center to center measurement of 128 mm sets the drilled hole spacing for this Berenson Brookridge pull, which matters when laying out new fronts or checking against existing 128 mm bore patterns during a hardware change. The pull length of 5-7/16 inches means the handle overhangs the hole spread slightly on each end, covering the bore area while leaving enough grip length in the middle for comfortable use. A projection of 1-1/4 inches defines how far the handle stands off the cabinet surface, which affects knuckle clearance when fingers wrap behind the pull. The width of 15/32 inch and base width of 1/2 inch at the mounting area determine the footprint at the contact points, which helps the pull sit neatly on common rail and stile widths without crowding edges. A screw size of 8-32 x 1/2 inch matches a standard machine screw thread and length used in cabinet hardware, which ties directly into typical shop drilling and fastening workflows.
The Brookridge collection name places this pull within Berenson decorative hardware, making it suitable anywhere that coordinated Brookridge handles are desired across cabinets and furniture runs. Its transitional style description indicates it can work on both raised panel and flat panel doors, so a mix of cabinet designs in one project can still share this same pull. The 128 mm center to center dimension works on cabinet doors and mid-size drawers where that metric drilling pattern is used, linking directly to layouts based on Euro-style or metric casework systems. With an overall length of 5-7/16 inches, the pull suits drawer fronts where more hand leverage is useful, while remaining compact enough for doors on upper or lower cabinets. The Verona Bronze finish lets this handle sit alongside other Verona Bronze elements in a room, such as hinges or decorative moldings, for a consistent color story on woodwork. Zinc construction supports use on frequently operated doors and drawers, since the cast metal body serves as the primary contact point for repeated opening and closing in kitchens, baths, and shop-built casework.
The clearly defined 128 mm center to center spacing on this Berenson 2622-10VB-P pull supports repeatable drilling across multiple cabinet pieces, helping jigs or boring machines align to one consistent metric pattern. The projection of 1-1/4 inches places the gripping surface away from the cabinet face at a known distance, which helps installers predict how much clearance will exist when doors or drawers sit near walls, appliances, or adjacent cabinets. A width of 15/32 inch and 1/2 inch base width standardize the visual band of metal across every pull in a run, so lines stay straight when handles are aligned by edge or rail references. The Verona Bronze finish on zinc provides a uniform surface tone on each pull, which matters when multiple units are mounted side by side on drawer banks. The specified screw size of 8-32 x 1/2 inch ties the pull to a widely used thread standard, allowing shop processes that rely on 8-32 hardware to integrate this handle into existing assembly steps. Being part of the Brookridge series within the Berenson handles and pulls class also aids repeatability, since future pulls ordered under the same series and part number can follow the established drilling and mounting layout.
The Berenson Brookridge 128mm pull has a 128 mm center to center measurement, which sets the distance between mounting holes for drilling and layout on cabinet doors or drawers.
The Berenson 2622-10VB-P handle has an overall length of 5-7/16 inches, giving enough bar length for a comfortable grip across doors and mid-size drawer fronts.
This Brookridge pull uses zinc as the material with a Verona Bronze finish, providing a cast metal body with a defined bronze color to coordinate with other Verona Bronze hardware.
The pull projects 1-1/4 inches from the cabinet surface, giving finger clearance behind the handle during operation while keeping the profile relatively compact on the door or drawer.
The cabinet pull is described as transitional style, placing its design between traditional and contemporary looks so it can work across different cabinet door profiles and room designs.
This Verona Bronze pull uses 8-32 x 1/2 inch screws, aligning it with a standard cabinet hardware machine screw size used in many shop and field installations.
This Berenson Brookridge Series 5-1/16 inch (128 mm) center to center Verona Bronze pull combines a 128 mm hole spacing, 5-7/16 inch length, and 1-1/4 inch projection to support consistent cabinet layouts. The zinc construction, transitional style, and Brookridge collection identity align with decorative hardware work where a coordinated look matters. For projects calling for a Verona Bronze finish and a 128 mm center to center metric drilling pattern, this Berenson 2622-10VB-P pull from Wurth Baer Supply provides a defined set of dimensions and style attributes to plan around.
