Berenson Brookridge Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 2625-1BPN-P

Berenson Brookridge Pull For Cabinet Projects

Berenson Brookridge brushed nickel pull is a transitional style cabinet pull that works as a bridge between traditional and contemporary layouts, so it supports a consistent look across mixed door and drawer fronts. The pull is identified in the Brookridge collection, which helps match it with other Brookridge pieces on the same job for a unified appearance. Its brushed nickel finish diffuses reflections, which helps fingerprints and minor contact marks stand out less during everyday use. The pull is made from zinc, giving a solid metal feel while keeping weight manageable on cabinet and drawer fronts. A center to center measurement of 160 mm matches common drill layouts for wider drawers or larger doors, which helps align this pull with existing or planned boring patterns. Overall length of 6-11/16 inches gives visual balance on broader faces where small pulls can look undersized.

Key Brookridge Pull Details For Planning

• The 160 mm center to center dimension sets clear hole spacing, which helps during layout, boring, and any template work for repeatable installations.
• The brushed nickel finish provides a muted metallic surface, which suits kitchen and bath environments where controlled reflection and coordinated metal tones matter.
• The transitional style description defines the design as neither highly ornate nor ultra minimalist, which supports use in a wide range of cabinet door and drawer designs.
• The zinc material construction creates a metal pull body, which supports a familiar hand feel when operating doors and drawers throughout daily use.
• The 6-11/16 inch overall length and 1-1/4 inch projection set the hand-grip distance from the cabinet face, which affects access for different hand sizes and grip preferences.
• The 15/32 inch width and 1/2 inch base size outline the bar thickness at the front and at the mounting points, which influences both appearance and the footprint on the cabinet surface.

Brookridge 160 Mm Center To Center Fit Details

The Brookridge pull uses a 160 mm center to center mounting spread, which directly defines the spacing between mounting points on the cabinet front and guides drill locations. A projection of 1-1/4 inches sets the stand-off from the door or drawer, which affects knuckle clearance and how easily fingers wrap behind the pull. With a width of 15/32 inch across the bar, the grip presents a slimmer front profile, which can influence the visual weight against narrow or flat-panel fronts. The 1/2 inch base dimension at each end outlines how much surface area meets the cabinet face, which is important when aligning the pull along narrow rails or stile edges. The listed length or diameter of 6-11/16 inches further describes the span of the pull across the face, tying visual scale to drawer or door width.

Using This Berenson Brookridge Cabinet Pull

Where This Brushed Nickel Pull Works Best

This Brookridge series pull from Berenson Corporation is positioned within decorative handles and pulls, so it is suited for cabinet doors and drawers rather than structural roles. The brushed nickel finish supports use anywhere a soft metallic tone is preferred, such as kitchens, baths, or built-in storage, because the finish coordinates with many brushed nickel faucets and hinges. Its transitional style allows the same pull to run across framed or frameless cabinet lines, tying together simple shaker fronts and smoother slab fronts within one project. The 6-11/16 inch overall length provides strong visual presence on base cabinet drawers where a longer pull anchors the front, while still matching 160 mm drilling common to many cabinet programs. As a zinc pull, it retains a metal character that aligns with other decorative hardware pieces in the same category.

Details That Support Consistent Installation Results

The 160 mm center to center dimension is the core installation reference, because it tells exactly where mounting points sit and lets installers use metric drilling jigs or templates set to that spacing. With a projection of 1-1/4 inches, the Brookridge pull keeps hands away from the cabinet surface, helping reduce direct contact against finished faces during repeated opening and closing. The 15/32 inch width defines the gripping surface front-to-back, which influences how the pull feels under the fingers when users pinch from the front edge. A base width of 1/2 inch at each foot indicates how much flat area sits against the door or drawer, which can help when aligning the pull parallel to door edges or drawer top rails. The tie to the Brookridge collection gives a named reference, which simplifies matching pulls and coordinating layouts across multiple rooms using the same hardware family.

Common Questions About Brookridge 160 Mm Pulls

Selecting This Brookridge Pull For Your Cabinets

The Brookridge 160 mm center to center pull pairs a 6-11/16 inch length with a brushed nickel finish, which helps it cover wider drawers while coordinating with other brushed nickel hardware across a project. Its transitional style supports use on varied cabinet front designs, giving flexibility when matching existing fronts or specifying new runs. With defined measurements for projection, width, and base size, this zinc pull from Berenson Corporation offers clear dimensional data for planning hole locations and visual balance on each cabinet.