Berenson Brookridge Series 6-5/16" (160 mm) Center to Center Modern Brushed Gold Pull, - 2629-1MDB-P

Brookridge Pull 160mm Center To Center Details

Brookridge pull 160mm center to center describes a Berenson Brookridge Series cabinet pull designed for straightforward, repeatable layouts on doors and drawers. The 160 mm center to center dimension establishes a fixed drilling pattern, which helps installers keep handle spacing consistent across a run of cabinetry. The pull has an overall length of 6-5/16 inches, so it spans a practical portion of typical drawer fronts without overpowering smaller panels. A length or diameter of 6-11/16 inches in the data signals a substantial grip area, which supports comfortable hand access when opening heavier cabinet faces. The pull projects 1-1/4 inches from the mounting surface, giving fingers room behind the handle while limiting how far it stands off the cabinet face. A width of 15/32 inch and a base size of 1/2 inch create a slim, transitional profile that works cleanly across different cabinet styles on a job.

Key Brookridge Pull Features For Cabinet Projects

• The Berenson Brookridge Series name identifies a coordinated decorative hardware line, which helps designers and installers keep a consistent style across multiple cabinet areas in the same space.
• The transitional style designation means this pull bridges traditional and modern cabinet looks, giving flexibility when pairing it with mixed-door profiles or trim details in remodel and new-build projects.
• The modern brushed gold finish provides a warm metallic tone with a brushed texture, which helps the pull read current while softening fingerprints and light surface marks in busy kitchen or bath environments.
• The zinc material construction delivers a metal pull body, which gives a solid feel at the hand and a familiar weight during everyday cabinet use in residential or light commercial settings.
• The center to center measurement of 160 mm supports metric-based layouts, which is useful when aligning with European cabinet drilling systems or repeating handle placement across modular casework.

Installation Dimensions Of This Modern Brushed Gold Pull

The 160 mm center to center drilling dimension defines the hole spacing for this modern brushed gold cabinet pull, which simplifies planning rail locations and jig settings during installation. The manufacturer lists the screw size as 8-32 by 1/2 inch, so the pull is set up for standard threaded engagement into typical cabinet door or drawer fronts that accept this thread. The 1-1/4 inch projection from the mounting surface provides enough clearance for fingers between the pull and the face, which supports comfortable operation without requiring deep over-travel on narrow walkways. A base width of 1/2 inch concentrates contact at each mounting point, which helps the pull sit cleanly on the surface and provides a defined footprint around each screw location.

Using The Berenson Brookridge Pull In Real Projects

Where This Transitional Zinc Cabinet Pull Fits

The Berenson Corporation Brookridge Series pull is categorized under handles and pulls for decorative hardware and moldings, so it is intended as a visible operating point on cabinet doors and drawers. Its transitional style allows it to work alongside both flat-panel and profiled fronts, which is helpful on projects that mix traditional trim with cleaner lines. The modern brushed gold finish supplies a distinct visual accent, making the pull an intentional design element on face-frame or frameless cabinetry. Because the material is zinc, the pull provides a metal touch surface that feels familiar in kitchens, baths, and built-in storage where hardware is used frequently throughout the day.

Why These Berenson Brookridge Details Matter On Site

The specified 160 mm center to center spacing gives installers a precise drilling target, which helps repeat hole locations with jigs or templates and reduces the chance of misaligned pulls across a bank of drawers. The overall length of 6-5/16 inches and listed 6-11/16 inch length or diameter figure indicate a pull that spans a wider section of the front, which can make it easier for different users to grab the handle from various angles. The 1-1/4 inch projection keeps knuckles away from the cabinet face when pulling, which can reduce scuffs on painted or stained finishes over time. A 15/32 inch width combined with a 1/2 inch base keeps the profile visually light while still creating a defined footprint at the contact points, which can help the pull sit square and look aligned on narrow rails or stile locations. The modern brushed gold finish adds contrast against common cabinet colors, which can support quick visual targeting of the handle in lower-light conditions.

Buyer Questions About This Brookridge Cabinet Pull

Select This Pull For Consistent Gold Cabinet Lines

This Berenson Brookridge Series 6-5/16 inch cabinet pull in modern brushed gold pairs a 160 mm center to center layout with a transitional style, supporting both design coordination and repeatable drilling patterns. The zinc construction, defined projection, and slim width provide a practical grip profile on doors and drawers. For projects calling for a modern brushed gold finish and metric-based spacing, this 2629-1MDB-P pull from Wurth Baer Supply offers a clear, documented set of dimensions for planning cabinet hardware layouts.