Berenson Brookridge Series 8-13/16" (224 mm) Center to Center Verona Bronze Pull, - 2632-10VB-P

Berenson Brookridge Pull 224mm For Cabinets

Berenson Brookridge pull 224mm describes a cabinet handle from the Brookridge collection, giving you a defined match when planning hardware across a job. The pull comes from Berenson Corporation, so the style and sizing follow a consistent decorative hardware line. Its center to center dimension is 224 mm, which sets the drilling layout for door and drawer fronts and keeps hole spacing uniform from cabinet to cabinet. The overall length of 9-11/32 inches gives the handle enough bar length for hand clearance on wider doors while still fitting on standard cabinet rails. A projection of 1-3/8 inches sets the standoff from the surface, creating comfortable grip space between fingers and the door face. The width of 11/16 inch and base size of 15/32 inch define the footprint against the cabinet, which helps you plan reveal, edge distance, and visual balance on each front.

Key Brookridge Verona Bronze Pull Details

• The pull belongs to the Brookridge collection, so it carries a coordinated design theme that can be repeated across doors and drawers for a unified look on a project.
• The style is listed as transitional, bridging traditional and contemporary lines and helping the same pull work across a variety of cabinet door profiles in one installation.
• The material is zinc, which provides a stable, cast metal base for the pull and supports a precise profile along the handle and bases during mounting.
• The finish is Verona Bronze, giving the pull a dark, warm tone that can visually tie together door finishes, hinges, and other visible hardware on the run.
• The manufacturer part number 2632-10VB-P identifies this exact size, finish, and collection, simplifying reorders or matching pulls on later phases of the same job.

Mounting Dimensions And Sizing For Fit

The center to center dimension of 224 mm sets the critical mounting measurement for this Berenson Brookridge pull, guiding where to drill two straight-line holes on each cabinet front. The overall length of 9-11/32 inches defines the space the handle spans on a drawer or door, which helps you assess clearance from adjacent fronts and edges. A projection of 1-3/8 inches determines how far the grip stands off the surface, shaping how fingers wrap around the pull without contacting the door face. The width of 11/16 inch and base of 15/32 inch define how much flat surface the pull covers, which matters when aligning over existing holes or layout lines on finished cabinetry.

Using This Brookridge Verona Bronze Cabinet Pull

Where This 8-13/16 Inch Pull Fits Best

This Brookridge Verona Bronze pull has an 8-13/16 inch center to center dimension of 224 mm, so it aligns with layouts designed for longer cabinet pulls on doors and wider drawers. The length of 9-11/32 inches helps the handle span a larger portion of a drawer front, which can improve leverage when opening heavier storage sections. Its transitional style lets the same pull work on both flat-panel and more detailed cabinet doors, supporting a continuous hardware look through kitchens, baths, or built-ins. The Verona Bronze finish provides a consistent dark metallic tone across all pulls of this model, which helps coordinate with other bronze-colored decorative hardware on a job. Because the pull comes from the Brookridge collection, it fits into a defined family of handles and maintains visual alignment when combined with other Brookridge pieces.

Details That Support Repeatable Cabinet Results

The 224 mm center to center dimension on this Berenson 2632-10VB-P pull standardizes hole spacing, which supports the use of drilling jigs or templates for repetitive cabinet runs. Its projection of 1-3/8 inches defines how far the hand pulls away from the face, helping create a consistent user feel across every door and drawer equipped with this model. The 11/16 inch width manages the visual weight of the handle on narrow rails or stile edges, which can reduce layout conflicts near panel details or neighboring hardware. A base size of 15/32 inch gives each foot a compact contact area on the door surface, which can be helpful when placing the pull on rails with limited flat space. The zinc material gives the pull a solid metal body, supporting the machined threads for the mounting interface and helping the handle stay firmly aligned once tightened.

Common Questions About This Brookridge Pull

Selecting This Brookridge Pull For Your Project

The Berenson Brookridge pull 224mm gives you a defined 224 mm center to center layout, simplifying hardware planning across multiple cabinets. Its transitional Brookridge styling and Verona Bronze finish provide a consistent look when the same pull is repeated on doors and drawers. With specified length, projection, width, and base dimensions, this zinc pull offers clear sizing details to match your cabinet fronts. Use the part number 2632-10VB-P when ordering from Wurth Baer Supply to align this handle with your planned cabinet hardware run.