Berenson Brookridge Series Matte Black 12" (305 mm) Center to Center Appliance Pull, -2636-1055-P

Berenson Brookridge Appliance Pull For Appliance Doors

Berenson Brookridge appliance pull is a matte black appliance handle designed for applications that need a 12 inch center to center pull. It serves as a substantial grip point on appliance fronts or oversized cabinet doors where a wider spread is preferred.

This pull is part of the Brookridge collection in a transitional style, so it works on projects where the design needs to bridge traditional and modern cabinet looks without visual conflict. The material is zinc, which creates a solid-feeling handle that still machines and threads efficiently for a straightforward install.

The overall length of 12-3/4 inches gives extra hand clearance along the bar, useful on taller or heavier fronts. A projection of 1-3/4 inches stands the pull off the face enough for fingers to wrap behind it. The 27/32 inch width and 19/32 inch base present a defined footprint on the door surface, helping the handle read appropriately sized for appliances.

Key Brookridge Pull Details For Daily Use

• The 12 inch center to center mounting dimension matches layouts designed around appliance-width pulls, simplifying drilling patterns on new builds or replacements where that spread is already set.
• Its 12-3/4 inch overall length gives extra bar extension beyond the mounting points, which helps users grab the pull from different angles along the appliance or tall cabinet front.
• The 1-3/4 inch projection keeps the hand away from the door surface, which reduces knuckle contact with raised panels or adjacent trim during repeated opening and closing.
• A width of 27/32 inch provides a broad gripping surface, giving a more substantial feel under the hand on heavy doors compared to narrower cabinet pulls.
• The 19/32 inch base dimension defines the contact area at each mounting point, helping the pull visually anchor to the surface and distribute perceived mass on wider fronts.
• The matte black finish delivers a low-sheen look that reads clean on transitional designs and can visually contrast lighter doors while minimizing reflection and fingerprint distraction.

Brookridge Appliance Pull Mounting And Layout

The pull is engineered with a 12 inch center to center dimension, so hole spacing follows a straightforward 12 inch layout on appliance panels or large doors. This repeatable spacing supports consistent handle placement across multiple fronts in the same run.

With a projection of 1-3/4 inches, the handle stands off far enough that fingers clear typical cabinet door profiles during use. The 27/32 inch width combines with this projection to create a deep grip pocket along the bar, which supports controlled opening on heavier units.

The base width of 19/32 inch sets a compact footprint at each mounting point, allowing the pull to sit comfortably on standard stile widths while still reading visually substantial on appliance-scale doors.

Using This Matte Black Pull On Appliance Fronts

Where The Berenson Brookridge Appliance Pull Fits

This appliance pull belongs to the Brookridge collection, so it suits projects where other Brookridge pieces are used and a larger-scale handle is required for appliances or tall doors. The transitional style lets it work on kitchens that mix clean lines with softer details without forcing a purely contemporary or traditional look.

With a 12 inch center to center dimension, it aligns with layouts built around appliance pulls rather than standard smaller cabinet pulls. That spacing makes it appropriate for wide refrigerator or freezer fronts and for pantry doors that benefit from a longer grip. The 12-3/4 inch overall length adds presence across the panel, so the handle looks proportional on these larger faces.

The matte black finish supports designs that rely on strong contrast against lighter cabinetry or that extend dark hardware across the room. Because the finish is matte, it presents a more understated surface that blends into transitional millwork while still defining the pull against the door material.

Details That Support Consistent Mounting Results

The specified 12 inch center to center measurement establishes a precise drilling distance between mounting points, which supports consistent handle alignment across multiple doors. Installers can use this fixed dimension to set up drilling jigs for repeated work on appliance panels and matching tall cabinets.

The 10-24 x 1/2 screw size defines the threaded interface into the pull, so it matches workflows that rely on 10-24 machine thread for mounting through appliance or cabinet faces. Using a known thread size lets fabricators plan boring and fastener selection around this standard dimension.

The combination of 1-3/4 inch projection and 27/32 inch width provides a stable grip area, which helps users get a firm hold when opening heavy units. The 19/32 inch base dimension creates a defined landing pad against the surface, which contributes to a clean, repeatable look when multiple pulls are lined up on a bank of doors.

The zinc material gives the pull a solid, unified body that accepts the matte black finish across all faces, creating consistent color and texture. This unified construction helps each pull read the same from unit to unit, supporting visual continuity along appliance and cabinet runs.

Common Questions About This Brookridge Appliance Pull

Selecting This Pull For Appliance-Scale Fronts

This Berenson Brookridge appliance pull combines a 12 inch center to center layout, 12-3/4 inch overall length, and matte black finish to suit appliance-scale and tall cabinet applications. When a project calls for a transitional zinc pull that spans wider fronts with a solid grip, this model provides defined dimensions, established thread size, and a coordinated collection look ready to integrate into your next installation.