Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Brookridge pull 224mm polished chrome describes a cabinet handle from the Berenson Brookridge Series with a 224 mm center to center mounting distance, which sets the exact hole spacing for new layouts or direct replacements on cabinet doors and drawers. The polished chrome finish on this pull creates a bright, reflective surface that pairs with many cabinet finishes in transitional projects where a clean look matters. Its transitional style bridges traditional and contemporary design, helping one hardware choice work across mixed door profiles in the same room. The pull is made from zinc, giving a solid metal body that supports everyday opening and closing without flex. An overall length of 9-11/32 inches provides a long grip area, so hands can grab from different angles on wider fronts. A projection of 1-3/8 inches gives finger clearance off the door face, reducing knuckle contact during use.
The 224 mm center to center dimension on the Berenson Brookridge pull defines where to place the pair of mounting holes in the cabinet front, guiding layout for both fresh installations and swaps from other 224 mm pulls. The 8-32 x 1 inch screw size in the specification describes the thread and length used with this pull, which aligns with common cabinet hardware boring practices for many standard door and drawer thicknesses. A 1-3/8 inch projection and 9-11/32 inch length set how far the pull stands off and stretches across the surface, influencing both grip feel and the visual proportion on medium to wide fronts. With a width of 11/16 inch, the hand contacts a defined bar profile, helping users grasp the pull consistently along its span.
This Berenson Brookridge Series pull is categorized under Handles and Pulls and Decorative Hardware & Moldings, positioning it for cabinet doors and drawers in woodworking and cabinetmaking projects. Its transitional style helps it suit installations where shaker, slab, or modestly profiled doors share the same space, supporting a unified hardware choice across a project. The polished chrome finish gives a clean, reflective look that works in kitchens, baths, and built-ins where bright metal hardware is preferred. At 9-11/32 inches overall with a 224 mm center to center span, the pull is sized for medium and larger cabinet fronts, offering enough length for two-handed gripping on wider drawers when needed. A projection of 1-3/8 inches keeps the hand offset from the cabinet surface, which is useful in high-use zones such as sink bases or pantry doors where frequent opening is expected.
The defined 224 mm center to center measurement on the Brookridge pull gives installers an exact drilling reference, which supports repeatable hole placement across banks of doors and drawers. The specified 8-32 x 1 inch screw size matches a standard machine-screw thread used in cabinet hardware, helping align this pull with typical shop boring setups and jig hardware. Its 1/2 inch base dimension describes the footprint at each mounting point, which helps the pull seat firmly against the cabinet surface for a secure feel in daily operation. The 11/16 inch width of the grip bar contributes to consistent hand contact, giving enough surface area for users to pull firmly without feeling thin or sharp. Combined, the zinc construction and polished chrome finish provide a solid metal component with a smooth surface that responds well to everyday handling on cabinetry. These measured details help installers repeat alignment, height, and spacing choices from one cabinet run to the next.
The Berenson 2653-1026-P pull has a 224 mm center to center, 9-11/32 inch overall length, 1-3/8 inch projection, 11/16 inch width, and a 1/2 inch base, shaping both fit and hand feel.
The 224 mm center to center spacing gives a fixed distance between mounting holes, supporting consistent drilling patterns and straightforward replacements on cabinets using that layout.
This Brookridge cabinet pull is made from zinc with a polished chrome finish, providing a solid metal body with a smooth, reflective surface suited to transitional cabinet designs.
The 1-3/8 inch projection holds the pull away from the cabinet face, giving finger clearance so hands can grip cleanly without pressing knuckles against the door or drawer front.
The 8-32 x 1 inch screw specification identifies a standard cabinet hardware thread and length, aligning this pull with common boring and fastening practices in cabinet shops.
The transitional style lets this pull work with both simple and mildly detailed cabinet doors, helping one design serve across varied room styles and door profiles.
The Berenson Brookridge Series 8-13/16 inch pull with 224 mm center to center, zinc construction, and polished chrome finish gives a defined set of measurements for cabinet work. Those fixed dimensions, from the 9-11/32 inch length to the 1-3/8 inch projection, help plan drilling, alignment, and visual balance across doors and drawers. For woodworking professionals and serious DIY users sourcing hardware through Wurth Baer Supply, these specifics let this pull slot into layouts that call for a transitional, polished chrome handle with established European-style spacing.
Sold In: 1 Each
