Series 65 Polyester Booth Filter - Air Flow Technology 01652020
Description
Series 65 Polyester Booth Filter For Spray Booths
Series 65 polyester booth filter from Air Flow Technology is a self supported tackified polyester intake filter designed for crossdraft intake air filtration in booths, so it handles front-to-back airflow common in spray environments. The filter is designed for a velocity of up to 400 FPM, allowing booths to operate at typical working air speeds without the filter quickly choking off airflow. It is constructed of 100% polyester media impregnated with a downstream applied non-migrating tackifier, so overspray and dust are held on the air-exit side of the media. Because the media is unaffected by humidity, the filter performance stays consistent in normal shop moisture conditions. The media is heat-sealed to a 9 gauge internal support frame, creating a rigid intake panel that stays flat in its frame opening during booth operation.
Key Filter Construction Details That Help Workflows
- The 100% polyester media provides a uniform synthetic structure, so airflow stays more even across the 20 x 20 inch intake area during use.
- The downstream applied non-migrating tackifier holds particles on the leaving-air side of the filter, which helps keep fibers from releasing back toward finished surfaces.
- The self supported intake filter design removes the need for additional backing layers, so installers can handle each 20 x 20 inch panel as a single rigid unit.
- The media heat-sealed to a 9 gauge internal support frame creates a sturdy panel, which helps the filter resist sagging or collapsing under booth airflow loads.
- The design for a velocity of up to 400 FPM keeps initial resistance low at installation, allowing normal rated air volume without an immediate drop in booth airflow.
Spray Booth Intake Filter Fit And Handling
This intake filter is a 20 x 20 inch panel, giving a defined square size that fits booth intake grids and holding frames designed around this dimension. The three-ply polyester construction described in the product identification delivers multiple fiber layers within one panel, so capture can build through the depth of the media rather than at a single surface. Because the media is heat-sealed to the 9 gauge internal support frame, the panel stays together as one piece when installers slide it into the booth intake opening. The self supported configuration allows the filter to stay flat against its mounting surface, which supports uniform loading of overspray across the intake area.
How This Intake Filter Works In Daily Spray Use
Where The Series 65 Polyester Booth Filter Fits
The Series 65 polyester booth filter is designed for crossdraft intake air filtration in booths, so it is used at the air entry side of spray booths that pull air horizontally across the work area. The 20 x 20 inch size suits intake banks built around repeatable square openings, letting installers set multiple panels in a row without cutting. Because the media is unaffected by humidity, the intake performance remains stable in typical wood finishing rooms where moisture levels can change during the day. The 100% polyester media with a downstream applied non-migrating tackifier sits in front of the booth work zone, capturing debris before it reaches sprayed parts while holding particles on the downstream side of the filter.
Why The Construction Supports Consistent Airflow Results
The self supported tackified polyester intake filter is designed for a velocity of up to 400 FPM, so booths can be set to common air speeds without the filter creating an early restriction that changes spray patterns. The low initial resistance described for this intake filter means that when the panel is first installed, airflow through the 20 x 20 inch face stays close to the booth design target. The media heat-sealed to a 9 gauge internal support frame forms a rigid structure, which keeps the panel from fluttering or oscillating in the airstream during operation. That stability helps maintain a consistent air path, so overspray is pulled away in a repeatable pattern from job to job. The construction of 100% polyester media impregnated with a downstream applied non-migrating tackifier captures particles through the depth of the three-ply structure while holding them in place, which reduces fiber movement in the airstream and supports a cleaner air supply to the spray zone.
Common Questions About The Series 65 Intake Filter
What type of media does the Series 65 polyester booth filter use?
The Series 65 polyester booth filter uses 100% polyester media, which provides a consistent synthetic fiber structure for intake air filtration in spray booths.
How does the downstream non-migrating tackifier help in operation?
The downstream applied non-migrating tackifier holds captured particles on the leaving-air side of the media, helping keep debris from releasing back toward the spray area.
What air velocity is this spray booth intake filter designed to handle?
The intake filter is designed for a velocity of up to 400 FPM, supporting normal spray booth airflow levels without creating high initial resistance at installation.
Why is the 9 gauge internal support frame important for installers?
The 9 gauge internal support frame keeps the media rigid and flat, making the 20 x 20 inch panel easier to handle and helping it resist collapse under airflow.
Where in the booth air path is this polyester intake panel used?
This polyester intake panel is used for crossdraft intake air filtration in booths, positioned at the air entry side to condition incoming air.
How does humidity affect the Series 65 intake filter performance?
The Series 65 intake filter is unaffected by humidity, so its media performance remains stable under varying moisture conditions in spray environments.
Selecting This Intake Filter For Spray Booth Air
The Series 65 polyester booth filter from Air Flow Technology combines a self supported tackified polyester intake design with a 20 x 20 inch three-ply panel format, so it suits spray booths that need crossdraft intake air filtration at up to 400 FPM. The 100% polyester media with a downstream applied non-migrating tackifier, bonded to a 9 gauge internal support frame, creates a rigid intake filter that supports stable airflow patterns. For shops seeking a defined-size intake panel for spray booth air entry banks, this filter provides a clearly specified media construction and airflow rating for consistent booth operation.