Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Bronte pull is a traditional bar pull sized for the tighter fronts in a cabinet run, mounting on 3 inch (76 mm) centers.
The 3 inch center-to-center is the standard hole pattern for narrower cabinet fronts: upper doors, spice pullouts, narrow base drawers, and bathroom vanity doors all commonly arrive drilled at this spacing. On a replacement job, that means this pull drops onto existing holes without any new drilling. On a new build, the compact footprint leaves enough door face on either side of the pull to keep the hardware from crowding the edge, which matters more on a 12 inch door than on a wide drawer bank. When a kitchen runs a mix of pull sizes because the drawers vary in width, the 3 inch pull is often what goes on the doors while a longer pull handles the wide drawer fronts.
The pull is cast in zinc and finished in Matte Black. Matte Black carries no sheen, so it does not pick up reflections under under-cabinet lighting or overhead pendants the way a polished finish does. On a painted cabinet it reads as a solid, graphic element. On a stained wood front it holds contrast without pulling attention away from the grain. The low-sheen surface also forgives handling marks better than a polished metal, which makes it a practical choice in a kitchen that gets daily use.
This pull suits a traditional or transitional kitchen, bath, or built-in where the hardware program is matte black and the fronts include at least some narrower doors or shallow drawers. It is a natural fit for a designer specifying a consistent finish across a full kitchen and needing a smaller center-to-center to handle the upper cabinet doors. Cabinet shops finishing a kitchen with mixed drawer widths will find this spacing covers the narrower fronts while matching the finish of the wider pulls in the Bronte series. Homeowners replacing hardware on a standard upper cabinet layout can use the existing hole spacing as the selection spec.
Measure between the centers of your two mounting holes. If that distance is 3 inches (76 mm), this pull mounts without any new drilling.
The bar is 11/16 inch wide, giving it a slender traditional profile rather than a squared contemporary cross-section.
The Bronte collection includes pulls at multiple center-to-center spacings in the same Matte Black finish, so mixing sizes within the series keeps the hardware consistent across the whole run.
A matte surface shows handling marks less readily than a polished or high-gloss finish and wipes clean easily.
Choose this pull when the narrower doors and drawers in the run need a 3 inch center-to-center that stays in the same collection and finish as the rest of the hardware program.
Sold In: 1 Each