Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Everitt pull is a contemporary cabinet pull that mounts on 3-3/4 inch (96 mm) centers, one of the most common hole patterns in residential cabinetry. It suits drawer fronts and cabinet doors where the hardware should hold the line without competing with the room.
The 3-3/4 inch center-to-center is worth naming specifically because it is the spacing most likely to match what is already drilled. On a cabinet reface or a hardware refresh, matching existing holes means no new drilling, no filler, and no misaligned pulls mid-run. At this spacing the Everitt pull suits upper door stiles, standard drawer fronts on base cabinets, and bath vanity drawers where the pull should be proportional rather than oversized. It is also a natural pairing with knobs on adjacent doors when both come from the same Everitt series.
The pull is cast in zinc and finished in Matte Black. Matte Black carries no sheen, so it does not pick up light from overhead fixtures the way a polished finish does. The result is hardware that reads as a consistent flat element on the face of the front rather than a reflective accent. On white or light-painted cabinetry it holds a clean graphic contrast. On dark fronts it recedes. Both readings suit a contemporary interior, which is why Matte Black is the Everitt series' most specifiable finish across mixed-light kitchen and bath environments.
This pull is a practical specification for cabinet shops, designers, and contractors building or refreshing contemporary kitchens and baths. The 96 mm spacing means it is stocked for high-volume door and drawer runs without requiring custom drilling jigs on standard stock. Designers assembling a hardware program across a full kitchen will find the Everitt collection offers knobs and companion pulls in the same finish, so doors and drawers can carry coordinated hardware without mixing series. Homeowners replacing an existing 3-3/4 inch pull get a straightforward swap with no modification to the door or drawer front.
Measure from the center of one mounting hole to the center of the other. If that measurement is 3-3/4 inches (or reads as 96 mm), this pull drops in without any new drilling.
The pull is 1/2 inch wide across the bar, and 4-7/16 inches in overall length from end to end. The center-to-center spacing of 3-3/4 inches is the drilling dimension.
A matte surface is more forgiving of fingerprints than a polished one because it does not create a reflective contrast. Everyday smudges wipe off cleanly with a damp cloth.
Yes. The Everitt series includes companion knobs in Matte Black, designed to coordinate with this pull on the same cabinetry program.
When the spacing is already drilled at 96 mm and the finish program is Matte Black, this Everitt pull resolves both without compromise.
Sold In: 1 Each